• Korean Management Science Review
• /
• v.31 no.3
• /
• pp.13-26
• /
• 2014

This paper considers an integrated one-vendor multi-buyer production-inventory model where the vendor manufactures multiple products in lot at their associated finite production rates. In the model, it is allowed for each product to be shipped in lot to the buyers even before the whole product production is not completed yet. Each product lot is dispatched to the associated buyer in a number of shipments. The buyers consume their products at fixed rates. The objective is to the production and shipment schedules in the integrated system, which minimizes the total cost per unit time. The total cost consists of production setup cost, inventory holding cost and shipment cost. For the model, an iterative optimal solution procedure with shipment consolidation policy incorporated. It is then tested through numerical experiments to show how efficient and effective the shipment consolidation policy is.

• Journal of the Korean housing association
• /
• v.15 no.3
• /
• pp.11-19
• /
• 2004

The purpose of this study is to explain the tectonic characteristics of 'Kan' which is an unit of composition in the head residence of Uisong Kims. Here, the 'Kan' is assumed as a conceptual framework to organize a house and also a maneuvering tool to control the spatial order with relationship between the whole and the part. Not limited to the simple conceptual aspects, but the interrelated elements such as the site conditions, modules, functions, structure and aesthetic factors. Through the process of the study, the role of 'Kan' is proved to be a tectonic tool for self-regulating architectural order by relation matrix of elements. 'Kan' is not only a fixed measuring tool for functions and material of a house but also a flexible device to control the building composition. 'Kan' is certainly a relative subject for measurement of form, space and aesthetic quality.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.125-145
• /
• 2001

To compare the stress distribution patterns between cement-retained and screw-retained implant supported fixed prostheses according to four different abutment types, a three dimensional finite element analysis was performed. The hypothetical three unit fixed partial denture case was modelled on the three implants(10mm length and 3.75 diameter) in mandibular bone. Four angles of implantation(vertical, 10, 15 and 20 degree inclined mesially) were created and three different directions of force (vertical, oblique, horizontal) were applied at the center of the second premolar and distal end of the first molar for each cases. Within the limits of this study, the results were as follows, 1. In vertically installed cases, the more stress was concentrated at upper components, but mesially inclined cases, the more stress was concentrated at cortical bone. 2, The more inclined mesially the more stress was observed, especially at cortical bone. 3. The cement-retained models showed lower principal stress and more even stress distribution than the screw-retained models. 4. The similar stress distribution pattern was showed in model 1 and model 2, model 3 and model 4. 5. The more stress was observed when the loads were applied at the distal end of 1st molar than the center of 2nd premolar. 6 The fixture and the model as a whole, lesser stress values were observed when vertical loads were applied as compared to horizontal and oblique loads.

• Korean journal of applied entomology
• /
• v.36 no.2
• /
• pp.150-155
• /
• 1997

Distribution of pine needle gall midge infestations was analyzed from data collected in young Japanese red pine stands during 1992, and 1995-1996 in Kangwon-do. No significant differences in percentages of infested needle pairs were found among trees and between terminal and lateral shoots within a tree. However, the mean percentages of infested needle pairs increased significantly from the lower crown to the upper. Percentages of infested needle pairs on sample units, consisting 1 terminal and 2 lateral shoots, in the midcrown were best predictors of whole-tree percentages than were other crown levels. Therefore, a sample unit consisting of 1 terminal shoot and 2 lateral shoots per branch were fixed from the midcrown level. Number of tree and sample unit combinations needed to estimate pine needle gall midge infestations with given two levels of precision were determined.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2012

With the development of MEMS, small and low-priced sensors integrating IMU and GPS have produced and exploited for diverse field. In this research, we have judged that MEMS-based IMU/GPS sensor is suitable for light-weighted mobile mapping system and carried out experiments to analyze the characteristics of MTi-G, which was developed from XSens company. From a sensor which fixed to dashboard, coordinates results with no post-processing were achieved for test area. On the whole, the results show satisfactory performances but some errors also were discovered from parts of the road due to sensor properties, XKF characteristics and GPS reception environment. We could confirm the potential of light-weighted mobile mapping system. Experiments considering various GPS reception environments and road condition and more detailed level of accuracy analysis will be performed for further research.

• School Mathematics
• /
• v.18 no.4
• /
• pp.793-818
• /
• 2016

The purpose of this study is to explore in detail $5^{th}$ grade students' understanding on the big ideas related to addition of fraction with different denominators: fixed whole unit, necessity of common measure, and recursive partitioning connected to algorithms. We conducted teaching experiments on 15 fifth grade students who had learned about addition of fractions with different denominators using the current textbook. Most students approached to the big ideas related to addition of fractions in a procedural way. However, some students were able to conceptually understand the interpretations and algorithms of fraction addition by quantitatively thinking about the context and focusing on the structures of units. Building on these results, this study is expected to suggest specific implications on instruction methods for addition of fractions with different denominators.

• Environmental Mutagens and Carcinogens
• /
• v.25 no.1
• /
• pp.25-31
• /
• 2005

The objective was to use MR imaging to provide a template of posterior fossa development during the late stages in the chick embryos. The MR findings were then correlated with histological data. Fourteen normal formalin-fixed embryonic specimens with a gestational age of 14 to 20 days were examined with 1.5 Tesla unit MRl using a conventional clinical magnet and pulse sequences. The MR findings were correlated with the whole-mount histological specimens. Resolution of the morphological features of posterior fossa development in embryos greater than 14 days gestational age was possible. Development of cerebellum, brain stem, 4th ventricle and bony posterior fossa was documented. In the 14-day-old embryos, a premordial cerebellum was visualized in the enlarged bony posterior fossa, and it covered the the roof of the primitive fourth ventricle. The bony posterior fossa grows at the same rate along the supratentorial skull. The supratentorial skull and the rostral part of the brain grows at the same rate. The cerebellum begins to grow later than the rostral part of the brain. In the 19- to 20-day-old embryos, MRl revealed the rapid development of the cerebellar hemispheres, along with an increase in volume manifested by the more typical mushroom-shaped configuration observed in the newly hatched. At this stage, the cerebellum almost completely filled the posterior fossa and covered the entire fourth ventricle. The brain stem grew steadily, but the volume change was too subtle to evaluate. Features of cerebellar histogeneis were beyond the resolution of MRl. However, there were lots of artifacts in the features of the bony posterior fossa. An MR template of normal posterior fossa development would be useful to avoid confusion of normal development with abnormal development and to identify the expected developmental features when provided the estimated gestational age of a embryo.

• Journal of Educational Research in Mathematics
• /
• v.27 no.3
• /
• pp.537-555
• /
• 2017

This paper compared and contrasted Korean and Singaporean textbooks in order to explore the direction and possibility of teaching the big ideas related to the addition and subtraction of fractions with different denominators proposed by Lee & Pang (2016a). Firstly, we examined the teaching sequences related to the addition of fractions with different denominators in a series of elementary mathematics textbooks of Korea and Singapore. We then analyzed what types of representations are used and how the representations are presented for the big ideas related to the addition of fractions with different denominators. The results of the analysis showed that the contents related to fraction addition are addressed more gradually and systematically in Singaporean textbooks compared to Korean counterparts. The graphical representations appeared in the Singaporean textbooks provide specific implications for teaching the big ideas of the addition of fractions with different denominators. Based on such implications, we expect that the big ideas related to the addition of fractions with different denominators will be addressed explicitly and systematically in Korean textbooks.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.1
• /
• pp.252-278
• /
• 2013

Many countries implement an offset program as a method of the acquisition of modern military technology for enhancement of the domestic military strength. Offset agreements are made based on the value, not a monetary unit. The value should be above minimum threshold fixed by the related regulation. Hence, technology valuation model which is objective and reasonable is required vitally. At present, some defense related organizations such as DTaQ, ADD valuate the proposed technology by using their own method. However, due to the lack of differentiation of valuation analysis indicators for various technologies, existing offset valuation models are inadequate to consider whole characteristics of such technologies. In this paper, we developed four sets of offset valuation analysis indicators considering the characteristics of each technology, parts production, depot maintenance, military equipment performance upgrade, and R&D related technology, by using the Delphi method. Also, we structurized those indicators in each technology by using the factor analysis. Through applying developed indicators, it is expected that technology valuation in the offset program would be more credible and accurate. Ultimately, it gives greater bargaining power to negotiators in the procedure of the offset negotiation.