• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.77-84
• /
• 2022

In this paper, we propose a system for monitoring air pollutants such as fine dust using an unmanned aerial vehicle capable of autonomous navigation. The existing air quality management system used a method of collecting information through a fixed sensor box or through a measurement sensor of a drone using a control device. This has disadvantages in that additional procedures for data collection and transmission must be performed in a limited space and for monitoring. In this paper, to overcome this problem, a GPS module for location information and a PMS7003 module for fine dust measurement are embedded in an unmanned aerial vehicle capable of autonomous navigation through flight information designation, and the collected information is stored in the SD module, and after the flight is completed, press the transmit button. It configures a system of one-stop structure that is stored in a remote database through a smartphone app connected via Bluetooth. In addition, an HTML5-based web monitoring page for real-time monitoring is configured and provided to interested users. The results of this study can be utilized in an environmental monitoring system through an unmanned aerial vehicle, and in the future, various pollutants measuring sensors such as sulfur dioxide and carbon dioxide will be added to develop it into a total environmental control system.

• Journal of Life Science
• /
• v.33 no.3
• /
• pp.268-276
• /
• 2023

This study was conducted to optimize the formulation conditions of the immediate-release layer of carvedilol in the development of a two-layer tablet formulation for carvedilol and ivabradine. Using a 2⁴+3 full-factorial design of experiments, excipients (microcrystalline cellulose, citric acid, and crospovidone) of the carvedilol immediate-release layer (wet granulation part) and process parameters for the tablet compression process (main compression) were optimized, and seven types of each dependent variable (assay, content uniformity, hardness, friability, disintegration, and dissolution [pH 1.2 and 6.8]) were evaluated using design expert software. The analysis of variance results confirmed that the main compression has a significant effect on hardness, friability, and disintegration time and that microcrystalline cellulose has a major effect on friability and dissolution. In addition, it was confirmed that citric acid has a significant effect on friability. Crospovidone affects friability and dissolution. According to the design space from the design of the experiment results, the optimized range is microcrystalline cellulose (~18.0-32.0 mg), citric acid (~0.5-12 mg), and main compression (~615-837 kgf). Consequently, this study confirmed the availability of manufacturing the carvedilol immediate-release layer in which all risk factors evaluated in the initial risk assessment are removed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.197-208
• /
• 2022

The existence of shallow bedrock and the desire to use underground space necessitate the use of blasting methods. The standard blasting method under water after drilling is associated with certain technical difficulties, including reduced detonation power, the use of a fixed charge per delay, and decoupling. However, there is no blasting method to replace the existing blasting method. In this paper, a dry hole charged with ANFO blasting is assessed while employing a dry hole pumping system to remove water from the drill borehole. Additional standard blasting is also utilized to compare the blasting performances of the two methods. The least-squares linear regression method is adopted to analyze the blasting vibration velocity quantitatively using the measured vibration velocity for each blasting method and the vibration velocity model as a function of the scaled distance. The results show that the dry hole charged with ANFO blasting will lead to greater damping of the blasting vibration, more energy dissipation to crush the surrounding rock, and closer distances for the allowable velocity of the blasting vibration. Also, standard blasting shows much longer influencing distances and a wider range of the blasting pattern. The pilot test confirms the blasting efficiency of dry hole charged with ANFO blasting.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.133-145
• /
• 2023

Class III malocclusion with mandibular protrusion can be divided into skeletal and pseudo malocclusion due to tooth displacement. For skeletal malocclusion, favorable treatment results can be obtained by establishing an appropriate vertical and horizontal intermaxillary relationship in order to secure a restoration space and obtain aesthetic and functional results. In this case, complete mouth rehabilitation was performed using an implant and a fixed prosthesis in a patient with mandibular protrusion and anterior teeth wear and reduced occlusal vertical dimension. After cast analysis and digital diagnosis, a provisional restoration with increased vertical dimension was fabricated to secure posterior support and evaluate stable centric occlusion. With the definitive prosthesis reflecting the provisional restoration, favorable function and aesthetics were obtained.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.85-91
• /
• 2024

In this paper, we studied projection mapping, which is being utilized as a digital canvas beyond space and time for theme parks, mega events, and exhibition performances. Since the existing projection technology used for fixed objects has the limitation that it is difficult to map moving objects in terms of utilization, it is urgent to develop a technology that can track and map moving objects and a real-time dynamic projection mapping system based on dynamically moving objects so that it can respond to various markets such as performances, exhibitions, and theme parks. In this paper, we propose a system that can track real-time objects in real time and eliminate the delay phenomenon by developing hardware and performing high-speed image processing. Specifically, we develop a real-time object image analysis and projection focusing control unit, an integrated operating system for a real-time object tracking system, and an image processing library for projection mapping. This research is expected to have a wide range of applications in the technology-intensive industry that utilizes real-time vision machine-based detection technology, as well as in the industry where cutting-edge science and technology are converged and produced.

• Journal of Trauma and Injury
• /
• v.37 no.1
• /
• pp.37-47
• /
• 2024

Purpose: This study aimed at developing a novel tube thoracostomy technique using the sternum, a fixed anatomical structure, as an indicator to reduce the possibility of incorrect chest tube positioning and complications in patients with chest trauma. Methods: This retrospective study analyzed the data of 184 patients with chest trauma who were aged ≥18 years, visited a single regional trauma center in Korea between April and June 2022, and underwent chest computed tomography (CT) with their arms down. The conventional gold standard, 5th intercostal space (ICS) method, was compared to the lower 1/2, 1/3, and 1/4 of the sternum method by analyzing CT images. Results: When virtual tube thoracostomy routes were drawn at the mid-axillary line at the 5th ICS level, 150 patients (81.5%) on the right side and 179 patients (97.3%) on the left did not pass the diaphragm. However, at the lower 1/2 of the sternum level, 171 patients (92.9%, P<0.001) on the right and 182 patients (98.9%, P= 0.250) on the left did not pass the diaphragm. At the 5th ICS level, 129 patients (70.1%) on the right and 156 patients (84.8%) on the left were located in the safety zone and did not pass the diaphragm. Alternatively, at the lower 1/2, 1/3, and 1/4 of the sternum level, 139 (75.5%, P=0.185), 49 (26.6%, P<0.001), and 10 (5.4%, P<0.001), respectively, on the right, and 146 (79.3%, P=0.041), 69 (37.5%, P<0.001), and 16 (8.7%, P<0.001) on the left were located in the safety zone and did not pass the diaphragm. Compared to the conventional 5th ICS method, the sternum 1/2 method had a safety zone prediction sensitivity of 90.0% to 90.7%, and 97.3% to 100% sensitivity for not passing the diaphragm. Conclusions: Using the sternum length as a tube thoracostomy indicator might be feasible.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.3
• /
• pp.193-200
• /
• 2024

In patients with severe alveolar bone resorption on mandibular anterior edentulous areas, it can be difficult to place implants in the location for crowns, and to create the fixed prosthesis having an adequate emergence profile or embrasure, which makes maintenance difficult. Fabricating a removable zirconia prosthesis with a milled bar on poorly positioned implants can be a good option because of easy maintenance. In this case, the patient had severe bone resorption on mandibular anterior region, and large vertical space. We report on the aesthetical and easy-to-maintain results by placing two implants and fabricating a zirconia prosthesis using milled bar.

• Journal of the Korea Computer Graphics Society
• /
• v.30 no.3
• /
• pp.71-79
• /
• 2024

This study organizes an immersive content production pipeline using Meta Quest Pro as an asymmetric virtual environment where mixed reality(MR) and virtual reality(VR) users participate and interact together. Based on this, we compare and analyze the differences in presence and experience provided by the user's experience environment. The proposed production process is to build an integrated development environment using Meta XR All-in-One SDK based on the Unity 3D engine. This includes a real space analysis method using the Room Model function for organic and accurate interaction between MR users in the real world and VR users based on virtual scenes at fixed coordinates. Based on this, this study produces immersive table tennis content where MR and VR users participate together. Finally, we conduct survey experiments to compare and analyze the effects of differences in platform and participation methods on presence and experience using the produced content. As a result, this study confirmed that all users can feel a satisfactory presence and experience within an experience environment where real and virtual correspond.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.325-341
• /
• 1997

One of the noticeable trends of female wear in 1990s is the Outwearization of Underwear as it is called 'Lingerie look' This trend meaned 'Exposure Fashion' raised splendidly its head to the whole stage of fashion destrying the tradional concept having divided the fashion between outwear and underwear by Madonna an Americal populer singer showed up in front of the audience wearing the corset-dress as a stage custome. This corset-dress which can not be recognised whether it is underwear or outwear has been diffused into the mass as a fashionable trend re-gardless of any reason; therefore discrimi-nation of wear by space by far that is underwear should have the sstandard telling between private and public sector has been gradually tumbled. By the way what has propelled desigers to introduce the style continuously having the underwear motive such as outwear almost as same as underwear or underwear worn on out-wear etc. and has made it a fashion trends? How do we accept this "Ligerie look'fashion" The rearch on vogue of outwearization of underwear started by the questions above can be summarized as the followings The division between the sprit and the ma-terial-economic shrinkage by the collapse of the bubble economy in the late of 20 century and expectation for the next century doubt by changes of international politics dynamics for the next century and increasement of psycho-logical tention by the environmental destruc-tion etc, has been extended to break the sense of value down These frustration of the tra-ditional values and dissatisfaction on the pres-ent have reflected on the fashion pursuing some more sensational style to increase the ex-posure of the body. The revolution of wearing bouncing the con-servatismhas outwardly expressed underwear of the private sector. Therefore the spatial concept of wear which for the public sec-tor has been fallen into pieces and has broken the wall of the concept fixed by outwear on underwear. in addition the stage costome for the popular people like Madonna has not been limited by the specularity any more and has been assimilated with the normal wear on the street to take the distinction for away. The circumstances of the late of 20 century pursuing sensation and making sex commer-cialized have accordance with the outweari-zation of underwear. there it is on the basis of Minimalist's dogmatism has been expressed the maximization of expoure in the pubric space to popularize bra pants(knickers) as outwear. The reaction on the attribute of hiding and shanding has brought 'See-Through fashion' with the transparent materials, The contemporary doubt recalling the mem-ory of the past has sublimated corset which was an instument of toture for women into Romanticism to introduce it to fashion with the development of a new material not to be a tool of any oppression and maltretment any longer. The popularization of outwear like underwear what's more has brought high quality of underwear. There it has called for the variety of materials such as knit demin and velvet etc, and has urged the famous designers to enlarge their working boundaries to underwear designs, Besides outwearization of underwear has been popular even in the Orient which has the con-servative opinions on exposure ; so changes of the thoughts can be seen among the establish-ment generation on exposure of the body. As the more high tech information publi-cized and the more technology and media digitalized the more expression being analog the pursue for the new in fashion with vision never been seen and even though it is imprac-tical the experimental designers have drived the freedom beyond the traditional roles of the previous century. Consequently outwearization of underwear may be viewd as a trial as an expression responded the contemporary background. This trend in my opinion will have been lasted for a while by being proliperlated among lasted for a while by being proliperlated among the pub-lic who has the century-end anxiety and doubt and expectation for the next century.