• 제목/요약/키워드: Fixed restorations

검색결과 119건 처리시간 0.023초

치아 정출술을 이용한 고정성 보철 수복 (Fixed Prosthodontic Restorations after Forced Eruption of Traumatised Anterior Teeth)

  • 김대곤;조리라;박찬진
    • 구강회복응용과학지
    • /
    • 제24권3호
    • /
    • pp.243-251
    • /
    • 2008
  • 외상으로 치아가 파절되었거나 우식으로 인해 치질이 치조정 수준이나 그 하방까지 소실된 경우 특별한 치료가 동반되지 않는다면 만족스럽게 수복할 수 없다. 이럴 경우 발치 후 임플란트 식립이나 레진 접착 가공 의치, 고정성 가공 의치 등을 이용할 수 있는데 각각의 상황에 따라 여러 가지 제한이 따른다. 이를 극복하는 방법의 하나로 치아 정출술을 이용할 수 있는데, 치아 정출술이란 연조직 및 골 변화를 일으키는 약한 힘을 지속적으로 적용하여 치아를 치관 방향으로 이동시키는 교정 술식으로 치주 건강을 유지하면서 보철 수복을 가능하게 하는 술식이다. 본 증례는 상악 전치부 파절이 발생한 치아를 치아 정출 술식을 이용하여 효과적으로 수복할 수 있었기에 이를 보고하는 바이다.

3M LavaTM Esthetic monolithic zirconia를 이용한 전치부 심미 수복 증례 (Esthetic anterior restoration using 3M LavaTM Esthetic monolithic zirconia)

  • 김형준;신수연
    • 구강회복응용과학지
    • /
    • 제34권4호
    • /
    • pp.306-316
    • /
    • 2018
  • 단일 구조 지르코니아는 높은 강도와 파괴 인성을 갖고 있어 고정성 보철 치료에 많이 활용되고 있으나 지르코니아 자체의 불투과성으로 인한 심미적인 한계 때문에 전치부 사용에서 어려움이 있었다. 최근에는 기존 단일 구조 지르코니아보다 투과성이 우수하며, 다양한 착색법을 이용하여 심미성을 개선한 지르코니아 블록들이 개발되고 있다. 3M $Lava^{TM}$ Esthetic 지르코니아는 제조사에 따르면 육방정계 결정상의 비율을 증가시키고 형광성 성분을 추가하여 기존 지르코니아보다 심미성이 우수하다고 소개되고 있다. 본 증례들에서는 심미성을 개선한 단일 구조 지르코니아를 이용하여 전치부를 수복하였으며 기능적, 심미적으로 만족한 결과를 얻었기에 이를 보고하는 바이다.

보철학적 교합 재구성을 위한 교합진단과 치료계획 (The Occlusal Evaluation and Treatment Planning for Prosthodontic Full Mouth Rehabilitation)

  • 이승규;이성복;최대균
    • 구강회복응용과학지
    • /
    • 제16권2호
    • /
    • pp.149-159
    • /
    • 2000
  • Occlusal disease is comparable to periodontitis in that it is generally not reversible. Occlusal disease, however, like periodontitis, often maintainable. It does itself to treatment and when restorative dentistry is utilized it becomes, in that sense, reversible. Moreover, a systematized and integrated approach will lead to a prognosis that is favorable and predictable. This approach facilitates development of optimum oral function, comfort, and esthetics, resulting in a satisfied patient. Such a systematized approach consists of four logical phase : (1) patient evaluation, (2) comprehensive analysis and treatment planning, (3) integrated and systematic reconstruction, and (4) postoperative maintenance. An integrated treatment plan is first developed on one set of diagnostic casts, properly mounted on a semiadjustable articulator using jaw relationship records. This is accomplished by using wax to make reconstructive modifications to the casts. These modified casts become the blueprint for planned occlusal changes and the fabrication of provisional restorations. The treatment goals are : (1) comfortably functioning temporomandibular joints and stomatognathic musculature, (2) adherence to the basic principle of occlusion advocated by Schuyler, (3) anterior guidance that is in harmony with the envelope of function, (4) restorations that will not violate the patient's neutral zone. This report shows the treatment procedures for a patient whose mandibular position has been altered due to posterior bite collapse. Migration of the maxillary anterior teeth had occurred, and the posterior occlusal contacts showed pathologic interference. Precise diagnosis using mounted casts was executed and prosthodontic reconstruction by the aid of an unconventional orthodontic correction on maxillary flaring was planned. An unconventional orthodontic correction can be accomplished by using preexisting natural teeth, which can be modified for use in active tooth movement or splinted together for orthodontic anchorage. This technique has an advantage over conventional fixed appliance orthodontic therapy because it can accomplish tooth movement concurrently with restorative and periodontal therapy. On occasion, minor tooth movement can be necessary to achieve the optimum occlusal scheme, crown form, and tooth position for the forces of occlusion to be displaced down the long axis of the periodontally compromised teeth. Once the occlusion, periodontal health, and crown contours for the provisional splinted restoration are acceptable, the final splinted restoration can be similarly fabricated, and it becomes an excellent orthodontic retainer.

  • PDF

구치부 교합지지 상실과 수직고경 감소를 동반한 부분 무치악 환자에서 교합평면 회복을 통한 완전구강회복 증례 (Full mouth rehabilitation through re-establishment of occlusal plane in partially edentulous patient with reduced vertical dimension accompanied by loss of posterior occlusal support)

  • 조영은;이성복;이석원;최조셉준석
    • 대한치과보철학회지
    • /
    • 제60권3호
    • /
    • pp.263-275
    • /
    • 2022
  • 구치부 교합지지가 상실되면 수직교합고경이 감소되면서 대합치의 점진적인 정출과 전치부 치아들의 전방 돌출을 초래하게 되고 결국 교합평면이 붕괴됨과 아울러 안모의 변화, 저작 효율 저하, 그리고 측두하악관절 장애 등의 문제가 발생할 수 있다. 이 경우, 정확한 진단 과 예지성 있는 치료계획 수립을 통한 교합평면 재설정 및 수직고경 회복이 필요하다. 본 증례는 71세 여성 환자로, 교합 평면이 붕괴되고 구치부 보철 수복 공간이 부족하여, 수직고경 거상을 동반한 완전구강회복을 계획하였다. 생리적 하악안정위, 연하, 발음, 안모, 전치부 평균 길이 등을 평가하는 임상적 과정을 통해 적절한 수직고경 및 3차원적 교합평면을 재설정하여 임시보철물을 제작하였고, 약 5개월 간 임시 보철물 상태로 악관절 및 저작근의 적응 여부를 관찰하고 교합을 안정화하였다. 기능적, 심미적 임상증상이 없음을 확인한 후 최종 보철 수복하였다. 이러한 환자친화적 완전구강회복 과정을 수행하여 기능 및 심미적으로 만족스러운 결과를 얻었기에 이를 보고하고자 한다.

상악 완전 무치악 환자에서 임플란트 고정성 보철물을 지대치로 한 후방 연장 국소의치 수복 증례 (Distal-extension removable partial denture with anterior implant supported fixed prostheses in a maxillary edentulous patient: Case report)

  • 권보라;전영찬;정창모;윤미정;이소현;허중보
    • 대한치과보철학회지
    • /
    • 제56권4호
    • /
    • pp.375-383
    • /
    • 2018
  • 완전 무치악 환자에서 임플란트를 이용한 보철 수복을 계획하는 경우 임상의는 많은 어려움과 직면하게 된다. 임플란트를 이용한 고정식 보철물로 수복하려는 경우 높은 치료 비용과 장기간의 치료 기간뿐만 아니라 고도로 흡수된 치조골로 인해 추가적인 수술을 동반해야 하는 경우가 많다. 또한 임플란트 피개의치 제작 시에는 수복물을 위한 악간 공간의 부족이 문제가 될 수 있다. 본 연구에서는 최근 연구되고 있는 임플란트를 지대치로 이용한 가철성 수복 증례의 하나로, 상악 완전 무치악 환자에서 전치부의 소수 임플란트 식립 후 이를 지대치로 하는 후방 연장 국소의치 수복을 수행하였다. 이는 치조골 이식 등의 부가적인 수술 가능성을 줄여 치료 기간을 단축시키며, 고령의 환자에게도 비교적 받아들이기 쉬운 치료법이 될 수 있다. 본 증례에서 이를 이용하여 환자에게 기존의 보철물 양식과 유사한 보철 수복을 제공하여 빠른 적응과 저작 효율 및 심미성을 회복하였으며, 만족할만한 치료 결과를 보여주었다.

레이저 적층 제조 기술을 이용한 상악 무치악 환자의 임플란트 고정성 보철 수복 증례 (Implant-supported prosthetic rehabilitation for the edentulous maxilla using the additive manufacturing technology: A case report)

  • 김희경
    • 대한치과보철학회지
    • /
    • 제56권2호
    • /
    • pp.173-178
    • /
    • 2018
  • 직접식 금속 레이저 소결 방식 시스템은 기공 오차 및 주조 결함 없이 제작 비용 및 제조 시간 단축을 장점으로 전악 임플란트 지지 고정성 보철물 제작에 유용하다. 본 증례에서는 직접식 금속 레이저 소결 방식과 치과용 캐드캠으로 제작된 단일구조 지르코니아 크라운을 사용하여 무치악 상악에서 임플란트 지지 고정성 치과 보철물의 성공적인 결과를 보고하고 임상적 의의를 평가하였다. 51세의 건강한 중년 여성이 상악 전 치아의 동요도를 주소로 서울대학교 치과병원에 내원하였다. 모든 상악 치아 발치 후 직접식 금속 레이저 소결 기술 및 캐드캠 단일구조 지르코니아 크라운을 사용하여 코발트-크롬 프레임을 포함하는 임플란트 지지 고정성 치과 보철물을 제작하였다. 최종 수복물 장착 6개월 후, 기계적 및 생물학적 합병증은 발견되지 않았고 보철물은 기능 및 심미적으로 만족스러운 결과를 보였다. 직접식 금속 레이저 소결 시스템을 이용하여 추가적인 기공 작업 없이 임플란트 지지 고정성 보철물을 제작하여 제조 시간을 단축하고 신뢰할 수 있는 정확도와 적합성을 얻었다.

부산지역(釜山地域) 개업치과(開業齒科)의 치과보철물(齒科補綴物)에 관(關)한 만족도(滿足度) 조사(調査)(I) - 일부정식 치과 보철물에 관하여 - (A Study on Satisfaction of Practicing Dentists about Prosthesis in Pusan Part I : About Fixed Prosthetic appliances)

  • 이명곤
    • 대한치과기공학회지
    • /
    • 제10권1호
    • /
    • pp.159-169
    • /
    • 1988
  • Fixed prosthetic appliance is the restorations of damaged teeth with cast metal or porcelain, and of replacing missing teeth with fixed, or cemented prosthesis. Successfully treating a patient by means of fixed prosthodontics requires the thoughtful combination of dentist and dental laboratory technician. In order to know the satisfaction of dentisits about fixed prosthetic appliances-porcelain, precious and non precious metal-, this study was conducted for 69 practicing dentisis in Pusan during Fed. to Mar. 1988 using a questionnaire method and was analyzed by the use of percentage, $X^2$-test The results are obtained as follow: 1. General characteristics of the respondents, The rate of age distribution of practcing dentists responded was as follow : 31$\sim$35 age group is 29.0%, 51$\sim$55age group 18.8%, 41$\sim$45 age group and 46$\sim$50 group each 11.6%, 36$\sim$40 age group and 56$\sim$60 age group 8.7%, over 60 age group 7.3%, below 30 age group 4.3% respectively. The tate of term of practice experience distribution of dentists responded was as follow : 6$\sim$10 year group 26.1%, 25$\sim$25year group 18.8%, 11$\sim$15 years group and 16~20 years group each 13.0%, below 5 years group and over 30 years group each 10.2%, 26$\sim$30 years group 8.7% in order. The rate of respondents’ degree was follow : bachelor group 81.2%, doctor group 13.0%, master group 5.8% in order. The rate of respondents’completed medical specialist course was as follow : non-complete group 75.4%, complete group 24.6%. The rate of having own laboratory in respondents’clinic was as follow : no having own laboratory group 58.0%, having own labiratory group 42.0% The rate of being lab. technician in respondent;s clinic was as follow: non-being lab. technician group 91.3%, being lab. technician group 8.7%. The rate of transactional commercial dental lab. numbers was as follow : I dental lab. group 40.6%, 2 dental lab. group 30.4%, 3 dental lab. group 20.3%, production at own lab. group 8.7% 2. Cognitions about the respondent's job, About cognition of patient numvers, there were neither many nor few group 62.3%, few group 17.4%, many group 15.9%, too many group 4.4% in order.(P<.01) As compared with the ratio of dentists to patient prothetic treatment, there were moderate level group 46.4%, high level group 33.6%, low level group 18.8% in order.(P<.01) By job satisfaction of respondents, the highest percentage group was satisfied group 44.9%, neither astisfied nor disstified group 33.3%, dissatisfied group 14.5%, much satisfied group 7.3%(P<.01). As compared with the level of prosthetics price, the were moderate level group 71.0%, low level group 23.2%, high level group 5.8%(P<.01) 3. Satisfaction and assessment of dissatisfied factor of the fixed prosthetic appliance, As compared with the satisfaction of al prosthetic appliance, there were neither satisfied nor dissatisfied group 59.4%, satisfied group 20.3% dissatisfied group 18.8%, much satisfied group 1.5% in order.(P<.01). About precious and non precious metal crown and bridge, there were neither satisfied nor dissatisfied group 60.9%, satisfied group 24.6%, dissatisfied group 11.6%, much satisfied group 2.9% in order.(P<.01) The reat of respondent;s satisfaction about porcelain crown and bridge was as follow : neither satisfied nor dissatisfied group 43.5%, dissatisfied group 33.3%, satisfied group 21.7%, much satisfied group 1.5%(P<.01). The rate of respondent's dissatisfied factor item of precious and non precious metal crown and bridge was as follow : inadequate margin fit item 39.1% respondent, inadequate occlusion item 24.6%, inadequate adaptation item 23.2%, poor anat omic form item 15.9%, inadequate contact item 31.9%, improper polishing item 4.4%, the rest item 11.6% respectively. The rate of respondent's dissatisfied factor item of porcelain crown and bridge was as follow : inadequate margin fit item 52.2%, inadequate occlusion item 2.9%, inadequate adaptation item 10.1%, poor anatomic form item 11.6%, improper polishing item 1.5%, shade mismatching item 71%, the rest item 7.2% respectively. The rate of cognition of respondents’ about cause of dissatisfied factor on fixed prosthetic appliance by item was as follow : deficiency of sincerity item 55.1%, deficiency of knowledge about work item 47.8%, deficiency of experience item 15.9%, poor quality of using material item 5.8%, the rest item 2.9% respectively.

  • PDF

하악골 부분절제술 시행한 환자에서 CAD/CAM Zirconia Framework와 Monolithic Zirconia를 이용한 전악 수복 증례 (Full mouth rehabilitation in a patient with partial mandibulectomy using CAD/CAM zirconia framework and monolithic zirconia)

  • 마보영;박홍주;임영관;박찬;신진호;임현필
    • 대한치과보철학회지
    • /
    • 제55권3호
    • /
    • pp.279-285
    • /
    • 2017
  • 구강암에 대한 외과적 처치로 구강 내 광범위한 경조직, 연조직을 제거한 환자는 저작, 연하, 발음 등의 기능적 문제와 치열, 안모의 심미적 문제를 갖게 된다. 악골 재건 후에도 치조골 등 합병증으로 인해 가철성 보철물의 유지 및 지지를 받는데 제한적이다. 임플란트 지지 고정성 보철물은 이러한 환자들에게 적절한 보철수복 방법이 되어 왔다. 본 증례는 하악 재건 후 computer-aided design과 computer-aided manufacturing을 이용하여 지르코니아 프레임워크 상부에 단일 구조 지르코니아 크라운을 제작하여 현재 치열의 기능적, 심미적 회복을 하여 이에 보고하고자 한다.

상악 단일 치아 임프란트의 후향적 연구 (A Retrospective study on upper single tooth implants)

  • 조수진;이근우;조규성;문익상
    • Journal of Periodontal and Implant Science
    • /
    • 제33권3호
    • /
    • pp.383-393
    • /
    • 2003
  • The aim of this retrospective study was to compare the amount of marginal bone loss between upper anterior area and upper posterior area with 71 upper single-tooth restorations on 2 stage machined $Br{{\aa}}nemark$ implants since Jan 1995. The second aim was to compare the bone defect group which had dehiscence and fenetration and the others in the upper anterior region. The results were as follows. 1. The most frequent reason of missing tooth in the upper anterior region was trauma by 61%. While upper posterior region showed various reasons such as congenital missing, advanced periodontitis, trauma. 2. Peri-implantitis with fistula occurred 1 of 41 implants in the upper anterior group in 1 year after loading and 2 of 32 implants in the upper posterior group failed before loading. The 1 year success rate of upper anterior group was 97.56 %, and 93.75 % for upper posterior group. 3. The mean marginal bone loss in the upper anterior group was 0.44${\pm}$0.25 mm, while 0.57${\pm}$0.32 mm in the upper posterior group. There was statistically significant difference in the amount of mean marginal bone loss (P${\pm}$0.10 mm at one year, and 0.48${\pm}$0.26 mm for the control group. No statistically significant difference of mean marginal bone loss was showen between bone defect group and the others at implantation. According to the results, the upper anterior region showed less marginal bone loss than the upper posterior region. In case of missing single upper tooth, careful consideration on recipient residual ridge to determine proper implant diameter and length, sufficient healing time, proper loading would lead to implant success. Single tooth implants in the maxilla seemed to be an alternative to fixed partial dentures without damage to adjacent teeth.

Comparative study on stress distribution around internal tapered connection implants according to fit of cement- and screw-retained prostheses

  • Lee, Mi-Young;Heo, Seong-Joo;Park, Eun-Jin;Park, Ji-Man
    • The Journal of Advanced Prosthodontics
    • /
    • 제5권3호
    • /
    • pp.312-318
    • /
    • 2013
  • PURPOSE. The aim of this study was to compare the passivity of implant superstructures by assessing the strain development around the internal tapered connection implants with strain gauges. MATERIALS AND METHODS. A polyurethane resin block in which two implants were embedded served as a measurement model. Two groups of implant restorations utilized cement-retained design and internal surface of the first group was adjusted until premature contact between the restoration and the abutment completely disappeared. In the second group, only nodules detectable to the naked eye were removed. The third group employed screw-retained design and specimens were generated by computer-aided design/computer-aided manufacturing system (n=10). Four strain gauges were fixed on the measurement model mesially and distally to the implants. The strains developed in each strain gauge were recorded during fixation of specimens. To compare the difference among groups, repeated measures 2-factor analysis was performed at a level of significance of ${\alpha}$=.05. RESULTS. The absolute strain values were measured to analyze the magnitude of strain. The mean absolute strain value ranged from 29.53 to 412.94 ${\mu}m/m$ at the different strain gauge locations. According to the result of overall comparison, the cement-retained prosthesis groups exhibited significant difference. No significant difference was detected between milled screw-retained prostheses group and cement-retained prosthesis groups. CONCLUSION. Within the limitations of the study, it was concluded that the cement-retained designs do not always exhibit lower levels of stress than screw-retained designs. The internal adjustment of a cement-retained implant restoration is essential to achieve passive fit.