• 한국철도학회논문집
• /
• 제19권1호
• /
• pp.54-66
• /
• 2016

이 연구에서는 흡수경계조건을 적용하여 경계부분에서 발생한 갑작스런 하중조건의 변화에 의해 발생한 탄성파의 전달 및 반사현상을 감소시키고자 하였으며, 흡수경계조건이 사용 유무에 따른 효과를 검증하였다. 또한, 정점하중재하의 경우와 이동하중에 의한 동적해석결과를 비교함으로써 정점하중재하가 이동하중을 적절히 표현할 수 있는가의 여부를 분석하였다. 주행속력의 변화에 따른 KTX 열차조건에서의 이동하중에 의한 동적해석을 수행하여 아스팔트 콘크리트 궤도에서의 동적안정성을 검토하였으며, 준정적인 표준 열차하중에 의한 해석결과를 비교함으로써 아스팔트 콘크리트 궤도의 구조 안전성을 확인하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.85-90
• /
• 1996

In the word, there is varied types of vibration, and these affect the mechanical industry. In this paper is plates with two parallel sides fixed. Electronic speckle pattern interferometry (ESPI) is one of the optical nondestructive testing technique. By using the ESPI, vibration modes for excitation point, a/b(ratio of longuitudinal and lateral length), and kind of specimen are measured and compared qualitatively with theoritical analysis that Warburton proposed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.21-34
• /
• 1988

Machinery enclosures are widely adopted to reduce the noise emission in various fields of application. Emitted noise, which is due to the vibration of enclosure's outer surface, is composed of two kinds of sound with different path of propagation. One is the "structure-borne sound", while the other is "air-borne sound". In order to get a most efficient machinery enclouser a prudent consideration upon the above structure-borne and air-borne sound is required, as the guiding principle of contermeasure for each noise is quite different. The controlling of input vibration and its isolation are major subjects for the structure-borne sound, and the specifications of absorbing members and damping panels are the major related matters for the air-borne sound. Hence, it seems very efficient to separate the total sounds into two categories with a great accuracy when one think of further reduction of noise from the existing enclosure, although its separating methods have not been made clear for many years. Author proposes an application method of experimental modal analysis to extract the structure-borne sound from the measured total radiation sound, as the air-borne sound is deduced by the vectorial difference between the measured total radiation sound and the calculated structure-borne sound. In order to calculate the correct structure-borne sound by the excitation at an arbitrary point on the enclosure structure, it is important to decide 1) how to estimate the enclosure's surface vibration velocity and 2) how to compute the radiation sound which is considered as the effect of vibration modes of enclosure surface. The former can be solved with total frequency response function calculated by the application of experimental modal analysis. The latter is to be solved by the author's new approaches for radiation sound computation by means of the Rayleigh's integral equation and the boundary-element method applied complex surface vibration velocity. As a first step, structure-borne sound by the excitation at an arbitry point on the rectangular plate with fixed edges, has been calculated to verified the reliability of the developed computation methods. The results of calculation show good agreements with those of the actual measurements.actual measurements.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.9-18
• /
• 2014

This paper proposes the fuzzy PI controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, this paper proposes the MPPT control using the fuzzy PI controller that can be improve a MPPT control performance. The fuzzy PI controller is adjusted a input of PI controller by fuzzy control and compensated a cumulative error of fuzzy control by PI controller. The fuzzy PI MPPT control is compared to conventional PO and IC MPPT method for various temperature and radiation condition. This paper proves the validity of the fuzzy PI controller using these results.

• 한국음향학회지
• /
• 제23권5호
• /
• pp.420-427
• /
• 2004

본 논문에서는 선형예측 잔여신호에 대한 하모닉 벡터 여기 코딩과 시간 대역 분리 혼합 코딩을 결합한 4kbps EHSX (Enhanced Harmonic Stochastic Excitation) 음성부호화기 실시간 구현한 내용을 기술한다. 유성음 구간에서는 하모닉 여기 코딩에 무성음 구간에 대해서는 분석-합성 구조의 벡터 여기 코딩을 사용하였으며, 유/무성음이 혼재하는 전이구간에서는 시간 분리 전이 코딩을 사용하였다. 이 음성부호화기 구현을 위해 부동소수점과 고정소수점을 모두 지원하는 DSP인 TMS320C6701을 사용하였고, 연산량을 줄이기 위해 IFFT를 사용한 저 복잡도 정현파 합성법을 사용하여 알고리즘의 최적화를 이루었으며, 복잡도의 문제가 되는 부분을 고정소수점으로 변환한 후 파이프라인을 적용한 핸드 어셈블리 코딩을 하여 구현에서의 최적화를 이루었다. 또한, 메모리의 효율성을 극대화하기 위해 캐쉬 메모리 할당과 데이터를 내부 메모리에 할당하였고 수학 연산의 최적화를 위해 FastRTS67x 라이브러리를 사용하였다. 개발 환경은 DSP EVM 보드를 사용하였으며 음성 신호의 입·출력 확인으로 동작 및 기능을 검증하여 실시간 구현하였다.

• 한국통신학회논문지
• /
• 제29권7C호
• /
• pp.962-970
• /
• 2004

본 논문에서는 TI사의 부동소수점 DSP인 TMS320C6701$^{TM}$을 이용한 2.4kbps EHSX(Enhanced Harmonic Stochastic Excitation) 음성부호화기의 실시간 구현 방법에 대해서 논한다. EHSX는 4khz의 대역폭을 갖는 음성신호를 2.4kbps의 비트율을 갖는 압축 패킷으로 변환하는 부호화 방법으로, 유/무성음에 따라 하모닉(Harmonic) 여기 부호화 방법과 CELP 부호화 방법을 선택적으로 사용하는 구조를 갖는다. 본 논문에서는 이러한 EHSX의 실시간 구현을 위해 연산량의 큰 비중을 차지하는 CELP 분석의 코드북 검색부분과 일부 IIR 필터링 부분에 대한 고정소수점 변환 방법과, 부호화시 하모닉 검색 및 피치 검색방법에 대한 알고리즘 상 연산량 감소 방법, DSP의 구조를 고려한 코드를 배치방법 등 연산량을 감소시키기 위한 최적화 방법을 제시한다. 설계된 음성 부호화기는 PESQ(perceptual evaluation of speech quality) ITU-T Recommendation P.862를 이용한 음질 평가 결과로서 약MOS 3.28을 얻었으며, 실시간으로 압축 및 복원을 수행한다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.444-449
• /
• 2010

The generation of electric power using self excited induction generation (SEIG) is a viable option in remote and rural areas where grid electricity is not available. The generated voltage and frequency of these machines, however, varies with varying loads. This characteristic can be resolved either by adjusting the values of the excitation capacitance or by controlling the prime mover speed. Further, in a single-point constant power application, where the machines deliver a fixed amount of power, the electronic load controller (ELC) can be used to switch-in or switch-out a dump load whenever the consumer load decreases or increases respectively. This paper presents a detailed analysis and the design of a microcontroller based SEIG -ELC system intended for stand-alone pico hydro power generation. The simulated performance of the controller is supplemented by experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1089-1092
• /
• 2001

In order to measure the vibration of a ribbed clindrical shell, the principle of reciprocity has been implemented. An accelerometer was fixed at the position defined as the excitation point. An impact hammer was used to tap at the response array points (64 points) located along the circumference of the shell. The frequency response function was reciprocally measured at each point in turn. The response data was processed to obtain the frequency/wavenumber spectrum. From the spectrum the characteristics of wave propagation on the ribbed cylindrical shell have been observed.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.306-320
• /
• 2010

Modern ultra-large container carriers can be exposed to the unprecedented springing excitation from ocean waves due to their relatively low torsional rigidity. Large deck opening on the deck of container carriers tends to cause warping distortion of hull structure under wave-induced excitation, eventually leading to the higher chance of resonance vibration between its torsional response and incoming waves. To handle this problem, a higher-order B-spline Rankine panel method and Vlasov-beam FE model was directly coupled in the time domain, and the coupled equation was solved by using an implicit iterative method. In order to capture the complicated behavior of thin-walled open section girder, a sophisticated beam-based finite element model was developed, which takes into account warping distortion and shear-on-wall effect. Then, the developed beam model was directly coupled with the time-domain Rankine panel method for hydrodynamic problem by using the fixed-point iteration method. The developed computational scheme was validated through the comparison with the frequency-domain solution on the container carrier model in linear springing regime.