• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.73-82
• /
• 2011

Recently, apartments have had several fundamental problems in planning uniformity caused by fixed space programs and difficulties of maintenance. So decision-makings become more important in design process which were essential to performance realization of long-life housing. Therefore, this study aims to analyze the plans of the Bogeumjari Nae-gok based on the applied designs, and suggests improvements for advanced design process of the long-life housing in the domestic market. This research procedure are as follows: (1) Analyze design guide, district land development plan and local code which have influence on design limitation. (2) Compare partial plans of joined designs and analyze each design characters (3) Implement case studies of design process due to design timetable and design elements of Nae-gok. In result, this study suggests significant fundamental materials for advanced decision-making in design process of long-life housing: details credibility and noise control, etc. This research could be useful in making integrated design process applied for long-life housing.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.48-54
• /
• 1999

For the high speed linear motor and the transportation device at clean room, a magnetic levitation rail without contact using the repulsive force of permanent magnets was newly developed. The characteristics of repulsive and lateral forces of the magnetic levitating system using permanent magnet was studied and the devised magnetic levitating system was evaluated by analytical and experimental approaches. This system is composed of two fixed guide rails with the rare earth permanent magnet array and a moving unit which is attached two magnet pairs at each sides. Because this system was forcedly levitated by the face to face repulsive forces, levitating air gap length can be repulsive force of an auxiliary magnetic repulsion system on the center of moving unit.

• Journal of Korean Elementary Science Education
• /
• v.38 no.3
• /
• pp.395-405
• /
• 2019

The purpose of this study is to analyze the process of creative science problem solving (CSPS) in elementary school students. To do this, 6 graders (n=9) at a elementary school in Seoul were participated. In this study, fixed eye-tracker with 250 Hz sampling and observation camera were used. The results of this study, the students with higher ability to solve creative science problems had a slower saccade, and had more visual attention on core clues and a greater number of eye changes. Therefore, students with higher ability to solve creative science problems showed more effective eye movement and faster information processing to solve problems. The CSPS types of elementary students were classified as 'declarative knowledge type', 'procedural knowledge type', 'conditional knowledge type', 'knowledge lack type'. Because each type appears to be complementary, CSPS process for elementary students who have integrated the four types was devised. The results of this study can be used as basic data for understanding elementary school students' CSPS and will help to develop and guide creative science teaching and learning programs useful to elementary school students and science gifted students.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.45-49
• /
• 2021

In this study, during the injection molding process, a device was manufactured and evaluated that calculates a cooling time by measuring a vibration signal generated from a mold using an acceleration. The last two parts, one of which has a large magnitude change in the measured vibration signal of a mold, were divided into a cooling start section (paking end section) and a mold opening section, and the time difference at the relevant points was calculated as the cooling time. The cooling time was monitored on a 5-inch light guide plate mold by applying the method. The manufactured device was attached to a fixed base of mold to measure the cooling time, and data was obtained remotely using Bluetooth technology. Then, the measured cooling time was compared with the cooling time set in the injection molding machine to evaluate the accuracy. As a result of the experiment, the cooling times measured by the devices were 15.675±0.024 sec, 20.637±0.014 sec and 25.623±0.079 sec of each conditions. Also, the measurement results were shown with errors of 0.655±0.044 sec, 0.637±0.014 sec, and 0.662±0.013 sec, respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.1-22
• /
• 2012

This paper tried to verify whether the fixed fire fighting system (FFFS) that is installed in road tunnel improves evacuation performance or not. Verification was performed according to the Disaster Prevention Facilities Installation and Management Guide at Road Tunnel. Twenty seven different fire scenarios were set up for the verification and the cases that FFFS was installed were compared with the cases that FFFS was not installed. The result of the comparison showed that the average equivalent death was reduced in 26 cases out of 27 cases when water spray extinguishing system was installed. It was confirmed that the risk when was not installed was unacceptable in Hong Kong and the Netherlands. On the other hand, it was confirmed that the risk was reduced to as low as reasonably practicable (ALARP) when was installed. The cumulative frequency of average death in case with FFFS was compared against the frequency of death without FFFS: death of one or more is about 50 times less; 10 or more is about 100 times less; and the death of more than 100 is four times less. It was verified that FFFS makes improved conditions to escape from the fires in road tunnel.

• Journal of the Korean Society of School Health
• /
• v.6 no.2
• /
• pp.24-55
• /
• 1993

School health aims to guide and manage growing students from elementary schools to high schools in order to grow healthily through the formation of healthy life habits, the self-control health management guide and the making of pleasant school health environments. Even though this school health plays an important role in guiding the students who are in the period of growing to have a perfect personality as a democratic people of our country in the school education, there are many lacks, such as they still don't know the word itself, "school health" or recognize its importance. Also it's a real condition to practice items concerned with the health under the condition of unestablished structure. 1. The results of analyzing school health real conditions. Based on treatises concerned with school health and various statistical materials which are announced by concerned people. We divided and analyzed school health into the items concerned with health education, the items with health management, and the items with school health environments, and investigated the level of the present school health and its necessity. As the items concerned with health education, we investigated the necessary range of school health education, the effect of health education on children's daily life, family's health and the interesting contents of school health. And as the items with health management, I investigated children's obesity, dental caries, eyesight, clinics, a health examination, drug abuse, spirit health, providing meals for school children, and school health manpower. And as the items conerned with school health environments, we investigated the recognition of the problem of natural environments, the management of purification district around the school, the problem of environments within the school and classroom lighting. As the results of analyzing these, I realized that the present level of school health is still in unsatisfactory situation and school health is needed necessary. 2. The establishment of school health. In order to set the school health, above all, the management system of School health should be set. I classified and systemized the contents of each item which had been promoted till now according to the function. They are classified as followings Based on classifying school health into (1) health education, (2) health management and (3) health environments, I divided school health education into the health education of health subjects, the health education of concerned subjects and the education of health life. And I divided health management into the health managements for a prevention and a cure. And I divided health environments into the environment around the school and within the school. Each system set like these is not fixed invariably and I should keep the relationship of mutual supplement between health education and health management, between health management and health environments, and between health environments management and health education. When we run these systemetic school health, students' health could be maintained and improved to more proper directions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.158-165
• /
• 2011

A 73-year-old Korean female patient with a fully edentulous mandible was planned to have five implant fixtures installed in the anterior mandible for the fixed prosthesis. After 3-dimensional (3D) computed tomographic scanning was transferred to OnDemand3D$^{(R)}$ (Cybermed Co., Seoul, Korea) software program for the virtual planning, five fixtures of MK III Groovy RP implants of Branemark System$^{(R)}$ (Nobel Biocare AB Co., Goteborg, Sweden) were installed in the anterior mandible between both mental foramens using In2Guide$^{(R)}$ (CyberMed Co., Seoul, Korea) mucosa-supported surgical template with Quick Guide Kit$^{(R)}$ (Osstem Implant Co., Seoul, Korea) systems. Fixture installations were completed successfully without any complications, such as mental nerve injury, bony bleedings, fenestrations and other unexpected events. Postoperative computed tomographic scans were aligned and fused to the planned implant, then angular and linear deviations were compared with the planned virtual implants. The mean angular deviation between the planned and actual implant axes was $3.42{\pm}1.336^{\circ}$. The mean distance between the planned and actual implant at the neck area was $0.544{\pm}0.290$ mm horizontally and $0.118{\pm}0.079$ mm vertically. The average distance between the planned and actual implant at the apex area was $1.166{\pm}0.566$ mm horizontally and $0.14{\pm}0.091$ mm vertically. These results could be considered more precise and accurate than previous reports, and even our recent results. The entire procedures of this case are reported and reviewed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.23-30
• /
• 2009

Crash cushions are protective devices that prevent errant vehicles from impacting on fixed objects. This function is accomplished by gradually decelerating a vehicle to a safe stop in a relatively short distance. Commonly used crash cushions generally employ one of two concepts to accomplish this function. The first concept involves the absorption of the kinetic energy of a moving vehicle by crushable or plastically deformable materials and the other one involves the transfer of the momentum of a moving vehicle to an expendable mass of material located in the vehicle's path. Crash cushions using the first concept are generally referred to as compression crash cushions and crash cushions using the other concept are generally referred to as inertial crash cushion. The objective of this research is the development of a compression-type crash cushion by employing the two concepts simultaneously. To minimize the number of full-scale crash tests for the development of the crash cushion, preliminary design guide considering inertial and frictional energy absorption was constructed and computer simulation was performed. LS-DYNA program, which is most widely used to analyze roadside safety features, was used for the computer simulation. The developed crash cushion satisfied the safety evaluation criteria for various impact conditions of CC2 performance level in the Korean design guide.

• Korean Journal of Optics and Photonics
• /
• v.33 no.2
• /
• pp.67-73
• /
• 2022

In a head-mounted display (HMD) for virtual-reality applications, a narrow viewing angle is preferred to the usual, wide viewing angle because the HMD is positioned close in front of the user's eyes, and the display position is fixed. In this paper, we propose a new back-light unit (BLU) for implementing a narrow viewing angle, which is suitable for a HMD. By optimizing the scattering patterns in the light-guide-plate and inverse-prism structures, the viewing angle and correlations between structural parameters in the BLU components are analyzed with ray-tracing simulations. As a result, a double-angle inverse-prism structure incorporating the scattering patterns of a light-guide plate is chosen, which results in a 14% increase in center luminance, a 16% decrease in the vertical viewing angle, and a light efficiency of up to 70%, compared to a conventional BLU. Thus, the new BLU system is expected to be applied in a high-efficiency liquid crystal display.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.