• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.517-520
• /
• 2003

Orthogonal Frequency Division Multiplexing (OFDM) is a promising technology for high speed multimedia communication in a frequency selective multipath channel. In this paper, Software IPs for the synchronizer of IEEE 802.11a Wireless LAN system are designed and optimized for TI's TMS320C6201 fixed point DSP. As a result of the execution cycles of the target DSP for each functions of the system, an efficient HW/SW partitioning method can be considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1540-1546
• /
• 2014

In order to resolve coverage hole problems caused by indoor-BS (IBS) faults, we propose a new frame structure and practical algorithm based on optimization technique. Our main contributions can be described as follows: 1) a frame structure with healing channels for solving abnormal IBS faults; and 2) an efficient heuristic resource allocation algorithm with fixed IBS selection to reduce the complexity for the optimization problem. Through intensive simulations, we evaluate the performance excellency of our proposed algorithm with respect to average cell capacity and user fairness compared with conventional algorithms.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.43-46
• /
• 2006

IEEE 802.16 WirelessMAN aiming to broadband wireless access (BWA) is evolving to 4G mobile communication system through the standardization of IEEE 802.16e supporting mobility on existing fixed WirelessMAN system. It is necessary for hand-over to provide seamless data service while MS (Mobile Station) moves to another BS (Base Station). Because the performance of handover affects packet loss or delay of any communications, it must consider low latency handover mechanism in packet based network. In this paper, we describes handover scheme of IEEE 802.16e with the cell edge interference problem and shows the way to solve the problem in frequency reuse one deployment. Our scheme reduces the handover latency and packet loss probability.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2059-2062
• /
• 2002

For detection of digitally modulated signals, the receiver must be provide with accurate carrier phase and symbol timing estimates. So far, tots of algorithms have been suggested for those purposes. In general, a interpolation filter with TED(Timing Error Detection) like Gardner algorithm is popularly used for symbol timing estimate of digital communication receiver. Apart from the performance point of view, a multiplicative operation of any interpolation filter limits the symbol rate of the system. Hence, we suggest a new symbol timing estimate algorithm for high speed burst-mode fixed wireless communication system and analyze its performance in the AWGN channel.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1363-1366
• /
• 2002

The studies of multi-hop wireless networks are active as the new communication media, which does not require any fixed communication infrastructure. One of application of the networks is local information distribution service, which is useful far daily activities in certain geographically restricted region or community within a radius of several kilometers. In this paper, MID-Net, which is the network enabling such distribution service, and effective information distribution algorithm MCMS are proposed. The behavior of the MID-Net is characterized by the waiting time function, three types of the functions are proposed in this paper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.5-14
• /
• 2008

In this paper, we propose operational concepts and technology requirements for guard and surveillance robots in military field. After surveying on current trend of guard robots, we present an operational scenario and technology requirements. To begin with, we discriminate the use of fixed type guard robots(fixed robots) and mobile guard and surveillance robots(mobile robots). Fixed robots are used for substituting daily guard by human soldier. In contrast, mobile robots are used for compensating shadow area where not to be covered by fixed type robots. To be specific, mobile robots adopt communication relays to extend operational range and sensor networks to collecting information. In addition, we present technology requirements composed of wireless communication system, platform, sensor nodes, unmanned driving technology, power supply system and IFF etc. In conclusion, in order to maximize co-operational functionality, fixed robots and mobile robots should be tightly related.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.67-73
• /
• 2008

This paper describes a system for location tracking wireless sensor nodes in an indoor environment. The sensor reading used for the location estimation is the received signal strength indication (RSSI) as given by an RF interface. By tagging users with a mobile node and deploying a number of reference nodes at fixed position in the room, the received signal strength indicator can be used to determine the position of tagged users. The system combines Euclidean distance technique with signal strength obtained by measurement driven log-normal path loss model of 2.4 GHz wireless channel. The experimental results demonstrated the ability of this system to estimate the location with a error less than 1.3m.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.515-525
• /
• 2022

The wireless power transfer (WPT) charging system for AGV depends highly on the coupling conditions due to air gap variation. To attain stable output power with high transfer efficiency under various coupling conditions, a single-stage, DC-DC converter that operates with robustness to changes in air gaps is proposed for the WPT system. The proposed converter is capable of soft switching under the set input voltage (V_in: 380 V_DC), load conditions (0-1 kW), and air gap changes (30-70 mm). In addition, a wide output voltage range (Vo: 39-54 V_DC) can be controlled by varying the link voltage due to the phase control at a fixed switching frequency. Experimental results are verified using a prototype of a 1 kW wireless power charging system.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2011

This paper proposes a systematic design for a precoding codebook for a transmit-ing space-division multiple access (TN-SDMA) sharing spectrum with existing fixed wireless service (FWS). Based on an estimated direction angle of a victim FWS system, an interfering transmitter adaptively constructs a codebook, forming a transmit in the direction angle, while satisfying orthogonal beamforming constraints. Sum throughput results indicate that the throughput loss of TN-SDMA relative to a practical SDMA, called per user unitary and rate control ($PU^2RC$), is lower at larger number of transmission antennas, lower signal-to-noise ratio, or a smaller number of users. In particular, a small loss (12% throughput loss) is provided for practical system parameters. Spectrum sharing results confirm that TNSDMA efficiently shares spectrum with FWS systems by reducing protection distance to more than 66 %. Although a TN-SDMA system always has lower throughput compared to $PU^2RC$ in non-coexistence scenarios; it offers an intriguing opportunity to re-use a spectrum already allocated to an FWS.