• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.73-85
• /
• 2009

An investigation was conducted to get the basic data for establishing structural safety and environmental management of tomato greenhouses in Chungnam region. The contents of the investigation consisted of actual state of greenhouse structures and environmental control facilities. Most of greenhouses were arch type single-span plastic houses and they had too low height for growing tomatoes. Frameworks of multi-span greenhouses were suitable, but those of single-span were mostly insufficient. Every greenhouse had thermal curtain movable or covering fixed inside the greenhouse for energy saving, and heating facilities were mostly warm air heater. Irrigation facilities were mostly drip tube and controlled by manual operation or timer. Almost all of the greenhouses didn't install high level of environmental control facilities such as ventilator, air circulation fan, $CO_2$ fertilizer, insect screen, supplemental light, and cooling device.

• Journal of Chest Surgery
• /
• v.30 no.11
• /
• pp.1083-1091
• /
• 1997

This study was purposed to assess the result of coronary artery bypass graft surgery by analyzing and comparing the pre and postoperative myocardial perfusion state quantitatively by using myocardial SPECT. Twenty patients who received coronary artery bypass graft surgery since 1993 underwent both preoperative and postoperative myocardial SPECT and the result were analyzed. The mean age was 56.4$\pm$9.0 years, and the patients were composed of thirteen males and seven females. For quantitative analysis, we used polar maps of SPECT generated by Cedars-Sin i Medical Center program and we calculated perfusion scores, ischemic myocardial area ratios and reperfusion scores from polar maps. Preoperative mean stressfrest perfusion score was 7.3$\pm$ 1.117.7$\pm$ 1.0 and postoperative score was 8.1 $\pm$ 1 118.3$\pm$ 1.1. Preoperative mean stress ischemic myocardial area ratio was 0.32$\pm$0.2 and postoperative ratio was 0.15 $\pm$0.1. Postoperative mean perfusion score was significantly increased but, on the other hand, mean ischemic myocardial area ratio was significantly decreased as compared with preoperative values(p<0.01). Preoperative mean perfusion score of patients with postoperative roper(usion score more than 1.5 was significantly higher(p<0.01) than that of patients with postoperative reperfusion score less than 1.5. Preoperative perfusion scores of coronary artery territories that had fixed perfusion defect at myocardial SPECT were significantly low(4.3 $\pm$0.514.6$\pm$0.6, stresslrest), nevertheless it proved quantitatively that there was improvement in myocardial perfusion after surgery by showing improved perfusion scores postoperatively. In conclusion, myocardial SPECT is useful method for quantitative analysis of the myocardial perfusion state after coronary artery bypass grafting surgery.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.162-176
• /
• 2016

The experience and play activities in forest spaces have played an effective role in children's growth and development, therefore, many studies and projects related to forest activity space have progressed actively. However, the focus of previous research has been merely on the effectiveness of forest activity but little on providing the basis for the spatial design of these types of forest activity spaces. Thus, this study aims to identify the relationship between children's developmental play activity and the physical characteristics of forest activity spaces for evidence-based design. First of all, indicators for Cognitive-Social play(CSP) was selected and forest spaces were categorize into play facility spaces and forest spaces. More detailed environmental characteristics of each space were 'play area' and 'paving materials' for play facilities and 'density of tree and shrub', 'slope', 'paving materials' and 'fixing and type of natural loose parts' for forest space. Through environmental inventory and behavior observation, the types of play behaviors and the occurrence frequency of children aged four to five were collected and analyzed. The results were as follows: 1) In play facility spaces, play behaviors occurred at a high frequency at the facility playground with play facilities and sand area. In terms of CSP, functional-solitary and functional-parallel plays occurred predominantly. 2) In forest spaces, various play behaviors occurred at high frequency in the environment with low density planting and various natural loose parts. For CSP, functional-group and symbolic-group plays occurred at a high frequency. 3) Symbolic-group play appeared to be highly affected by environmental characteristics like tree area of scatter density or less, 10~20 degree slope, and the presence of fixed large stumps. In conclusion, this study provides standards of physical environmental characteristics for forest activity space design through direct observation and analysis of children's play behaviors.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.419-426
• /
• 2001

The stochiometric $AgGaSe_2$ polycrystalline mixture of evaporating materials for the $AgGaSe_2$ single crystal thin film was prepared from horizontal furnace. To obtain the single crystal thin films, $AgGaSe_2$ mixed crystal and semi-insulating GaAs(100) wafer were used as source material and substrate for the Hot Wall Epitaxy (HWE) system, respectively. The source and substrate temperature were fixed at$ 630^{\circ}C$ and $420^{\circ}C$, respectively. The thickness of grown single crystal thin films is 2.1$\mu\textrm{m}$. The single crystal thin films were investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of AgGaSe$_2$ single crystal thin films measured from Hall effect by van der Pauw method are $4.89\Times10^{17}$ cm$^{-3}$ , 129cm2/V.s at 293K, respectively. From the Photocurrent spectrum by illumination of perpendicular light on the c-axis of the AgGaSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting $$\Delta$S_{o}$ and the crystal field splitting $\Delta$C$_{r}$, were 0.1762eV and 0.2474eV at 10K, respectively. From the photoluminescence measurement of AgGaSe$_2$ single crystal thin film, we observed free excision (EX) observable only in high quality crystal and neutral bound exciton ($D^{o}$ , X) having very strong peak intensity. And, the full width at half maximum and binding energy of neutral donor bound excition were 8mev and 14.1meV, respectively. By Haynes rule, an activation energy of impurity was 141 meV.ion energy of impurity was 141 meV.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.67-73
• /
• 2015

This is a basic research for improving soft magnetic property of Fe based nano crystalline alloy powder core. The main study is done around characteristics of permeability, core loss, and DC bias depending on amount of insulation coating agent and particle size. First, $Fe_{73.5}Si_{13.5}B_9Nb_3Cu_1$ amorphous alloy ribbon was fabricated by using the planar flow casting (PFC) device. Then, heat treatment and ball milling were done to obtain alloy powder. The amount of polyether imide (PEI) added to it was varied by 0.5, 1.0, 2.0, 2.5 wt% to have compression molding into $16ton/cm^2$. After going through crystalline heat treatment, the made toroidal nano crystalline powder core ($OD12.7mm^*ID7.62mm^*H4.75mm$) had smaller permeability as amount of insulation coating agent decreases. However, it was found out that core loss and DC bias characteristics have been improved. The reason for this results were expected to be because green density of power core decreases as amorphous alloy powder particles become smaller as amount of alloy powder insulation coating agent increases, it was determined that 1 wt% of insulation coating agent is appropriate. Also, for powder core made based on alloy powder size with amount of insulation coating agent fixed at 1 wt%, effective permeability and core loss were outstanding as particle size became bigger. However, characteristics of DC bias became worse as applied DC field increases. This is expected to be due to insulation effect, residual pores, or molding density of powder core resulting from thickness of coating on surface of alloy powder.

• Korean Journal of Veterinary Research
• /
• v.37 no.1
• /
• pp.167-176
• /
• 1997

The present investigation was focussed mainly on the development of the tumors and proliferating cells on the intestinal tracts of 1, 2-dimethyl-hydrazine(DMH)-treated young or adult rats. 26 rats(Wistar, 14 young rats weighting approximately 130~180gm and 12 adult rats weighting approximately 500~550gm) were given subcutaneously once weekly with 20mg of DMH/kg body weight(BW)/week for 8~22 weeks. Individual body weight were recorded weekly at the same day and time. The rats were killed at 8, 13, 15. 17, 19, 21 and 22 weeks. The intestinal tracts were opened longitudinally and carefully examined for tumors. The localization, number, and size of tumors were noted. Tumor-bearing areas were dissected out and fixed on neutral buffered 10% formalin and normal-looking mucosa from 8~22 weeks rats were also taken for fixation. Paraffin sections were stained by H-E for histopathological examination or with immunohistochemical stain for bromodeoxyuridine(Brdur) positive cells. 1. The growth proportion of body weight appeared to be decreased in the DMH-treated young rats than in control young rats and body weight of DMH-treated adult rats appeared to be 13.4% or less lower than weighted on 0 week. 2. Macroscopically, the developed tumors in the intestinal tracts were not observed as early as the 13 weeks after DMH treatment. The number of developed tumors per rat was found to be 14.3, 18.8, 22.3 in 15, 17 and 22 weeks. The numbers of tumors in intestinal regions per rat were 2.1, 4.3, 5.4, 2.5 in duodenum, jejunum, ilium and colon on 15 weeks, 2.3, 6.4, 7.8, 2.3, on 17 weeks, and 2.7, 9.3, 9.0, 1.3 on 22 weeks, respectively and the ileum and jejunum were higher in appearance rate of tumors and tumor types are dome shapes and diameter of largest tumor were 6.3mm. 3. Histopathologically, intestinal mucosa were thickened by the irregular distorted and distended crypts following hyperplasia. The tumors developed on the mucosa and submucosa and were recognized to be adenocarcinoma. 4. Immunohistochemically, the labeling index(LI) was calculated as the ratio of the number of Brdur-labeled cells to the total number of column cells of the crypts with longitudinal axis. LI of Brdur positive cells per crypt were 5.6%, 8.0% on small intestine of control and 22 week group, respectively and 3.7%, 12.7% on large intestine of control and 22 week group, respectively and were appeared to be increase in 22 week group than in control group and to be more number of proliferating cells in 22 week group than in control group. 5. LI of Brdur positive cells in 1, 2, 3, 4, 5 segments of crypt column were 11.7%, 10.7%, 3.8%, 0.6%, 0% in small intestine of control group and 23.5%, 11.8%, 2.3%, 2.4%, 0.8% in small intestine of 22 week group, and 5.4%, 7.4%, 3.8%, 1.0%, 0.4% in large intestine of control group and 29.5%, 20.3%, 5.9%, 6.3%, 1.3% in large intestine of 22 week group respectively. So results indicate that the number of proliferating cells by DMH treatment increase and were concentrated on the 1, 2 segments of crypt columns.

• Korean Journal of Veterinary Research
• /
• v.45 no.3
• /
• pp.325-334
• /
• 2005

Changes in the rabbit Leydig cell from birth to adulthood were studied in New Zealand white rabbits of 1, 7, 21, 35, 49, 70, 105, 147, 196, and 252 days (n = 8 rabbits per group) of age. The objectives of this study were to understand the fate of the fetal Leydig cells, to determine the changes in serum testosterone levels, and leutenizing hormone-stimulated testosterone production per testis in vitro, and to quantify adult Leydig cells by number and average volume with age. Testes of rabbits were fixed by whole body perfusion using a fixative containing 2.5% glutaraldehyde in cacodylate buffer, processed and embedded in Epon-araldite. Using $1{\mu}m$ sections stained with methylene blue-azure II, qualitative and quantitative (stereological) morphological studies were performed. Testosterone levels in the incubation medium of luteinizing hormone-stimulated (100 ng/ml) testosterone secretion per testis in vitro, and in serum were determined by radioimmunoassay. The average volume of a testis of 1-day-old rabbits was determined as $0.0073cm^3$ and the parameter increased linearly from birth to 252 days ($3.93cm^3$). The volume density of the seminiferous tubules increased with age from 33.76% at day 1 to 88.2% at day 252. The volume density of the interstitium represents 66.24% of the testicular parenchyma at day 1. This proportion progressively diminished during development to reach a value of 11.8% at day 252. The volume density of Leydig cells increased almost linearly from birth (0.001%) to 252 days (2.62%). Leydig cell mass per testis increases from 0.0012 mg to 0.25 mg between days 1 and 35, from 2.66 mg to 44.3 mg between days 49 and 105 and from 65.42 mg and 102.9 mg between days 147 and 252. The absolute numbers of adult Leydig cells per testis increased linearly from birth to 252 days. The average volume of adult Leydig cell on days 1, 7, 21 and 35 was not significantly different; a gradual and continued increase was observed thereafter, reaching a 3-fold increase at 196 and 252 days. Serum testosterone concentrations were not significantly different at day 1 compared days 7, 21, 35. Significant increases were observed at days 49 and 70. Values at days 70 and 105 and days 147, 196, and 252 were not significantly different. LH-stimulated testosterone production per testis in vitro was significantly different at day 1 compared days 7, 21, 35. Significant increases were observed at days 49 and 70. Hormonal values at days 105, 147, 196, and 252 were not significantly different. These data suggested Leydig cell developmental phase can be classified: a neonatal phase (1-7 days), a prepubertal phase (14-49 days) and an adult phase (70-252 days). Immature and mature adult Leydig cells, initially detected at days 7 and 49, respectively, and mature adult Leydig cells were abundant Leydig cell type according to the number and absolute volume per testis form day 49 onwards.

• Journal of Life Science
• /
• v.26 no.9
• /
• pp.1056-1062
• /
• 2016

Lung cancer is currently the most common malignant disease and the leading cause of mortality in the world and non-small cell lung cancer (NSCLC) accounts for 75-80% of lung cancer cases. miR-155 gene was found to be over expressed in several solid tumors, such as thyroid carcinoma, breast cancer, colon cancer, cervical cancer, pancreatic ductal adenocarcinoma (PDAC) and lung cancer. The aims of this study were to define the expression of miR-155 in lung cancer and its associated clinic-pathologic characteristics. Total RNA was purified from formalin-fixed, paraffin-embedded NSCLC tissues and benign lung tissues. Expression of miR-155 in human lung cancer tissues were evaluated as mean fold changes of miR-155 in cancer tissues compared to benign lung tissues by quantitative real-time reverse transcriptase polymerase chain reaction (real-time qRT-PCR) and associations of miR-155 expression with clinic-pathologic findings of cancer. Compared with the benign control group, miR-155 expression was significantly overexpressed in NSCLCs (p=<0.001). miR-155 was more overexpressed in squamous cell carcinoma than in adenocarcinoma. Poorly differentiated tumors showed significantly overexpression of miR-155 than well-differentiated tumors (p=<0.001). Overexpression of miR-155 was significantly associated with lymph node metastasis (p=<0.05). In survival analysis for all NSCLC patients, high miR-155 expression was significantly correlated with worse overall survival (p=<0.05). These results suggested that miR-155 might play an important role in lung cancer progression and metastasis.

• Radiation Oncology Journal
• /
• v.15 no.1
• /
• pp.71-78
• /
• 1997

Purpose : To collect beam data for dynamic wedge fields using conventional measurement tools without the multi-detector system, such as the linear diode detectors or ionization chambers. Materials and Methods : The accelerator CL 2100 C/D has two photon energies of 6MV and 15MV with dynamic wedge an91es of 15o, 30o, 45o and 60o. Wedge transmission factors, percentage depth doses(PDD's) and dose Profiles were measured. The measurements for wedge transmission factors are performed for field sizes ranging from $4\times4cm^2\;to\;20\times20cm^2$ in 1-2cm steps. Various rectangular field sizes are also measured for each photon energy of 6MV and 15MV, with the combination of each dynamic wedge angle of 15o 30o. 45o and 60o. These factors are compared to the calculated wedge factors using STT(Segmented Treatment Table) value. PDD's are measured with the film and the chamber in water Phantom for fixed square field. Converting parameters for film data to chamber data could be obtained from this procedure. The PDD's for dynamic wedged fields could be obtained from film dosimetry by using the converting parameters without using ionization chamber. Dose profiles are obtained from interpolation and STT weighted superposition of data through selected asymmetric static field measurement using ionization chamber. Results : The measured values of wedge transmission factors show good agreement to the calculated values The wedge factors of rectangular fields for constant V-field were equal to those of square fields The differences between open fields' PDDs and those from dynamic fields are insignificant. Dose profiles from superposition method showed acceptable range of accuracy(maximum 2% error) when we compare to those from film dosimetry. Conclusion : The results from this superposition method showed that commissionning of dynamic wedge could be done with conventional dosimetric tools such as Point detector system and film dosimetry winthin maximum 2% error range of accuracy.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.