• 한국항공운항학회지
• /
• 제30권4호
• /
• pp.184-190
• /
• 2022

In an attempt to apply hybrid rocket to the RATO (Rocket-Assisted Take Off) system, combustion characteristics of the non-circular grain were figured out in this study. Having larger combustion area, it was reconfirmed that the non-circular grain has advantages over regression rate, characteristic velocity and chamber pressure in which all gave higher values. Experiments were performed to understand the effect of the non-circular grain geometry over time where local regression rates depending on grain location were analyzed. It was found that the regression rate of five distinct locations were different. Partial conclusion driven was that these differences are due to the heat transfer caused by dissimilar distances from the flame layer. Besides, as combustion duration increased, the fuel port became circular, and the regression rate converged to a single value over the whole grain.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.41-46
• /
• 2013

The microstructural evolution of AA1050/AA6061 complex aluminum alloy, which is fabricated using an accumulative roll-bonding (ARB) process, with the proceeding of ARB, was investigated by electron back scatter diffraction (EBSD) analysis. The specimen after one cycle exhibited a deformed structure in which the grains were elongated to the rolling direction for all regions in the thickness direction. With the proceeding of the ARB, the grain became finer; the average grain size of the as received material was $45{\mu}m$; however, it became $6.3{\mu}m$ after one cycle, $1.5{\mu}m$ after three cycles, and $0.95{\mu}m$ after five cycles. The deviation of the grain size distribution of the ARB processed specimens decreased with increasing number of ARB cycles. The volume fraction of the high angle grain boundary also increased with the number of ARB cycles; it was 43.7% after one cycle, 62.7% after three cycles, and 65.6% after five cycles. On the other hand, the texture development was different depending on the regions and the materials. A shear texture component {001}<110> mainly developed in the surface region, while the rolling texture components {011}<211> and {112}<111> developed in the other regions. The difference of the texture between AA1050 and AA6061 was most obvious in the surface region; {001}<110> component mainly developed in AA1050 and {111}<110> component in AA6061.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.357-364
• /
• 1999

The purpose of this study is to analysis the grain distribution and compaction characteristics of structural backfill with reclaimed soil. Five(5) reclaimed soil samples which passed #200 sieve have been used in the test. The study showed that the maximum dry density and the bearing value rate turned out to be becoming smaller when the more the quantity passed #200 sieve, the smaller the soil grain. The maximum dry density value calculated from the compaction md relative density test showed wet method > compaction method > dry method. The correlation coefficient between Rc and Dr based on the grain distribution and the compaction characteristics showed that the maximum dry density value by the wet method is little higher than the compaction method and dry method.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.63-69
• /
• 1998

This study was carried out to get some basic information on mechanical properties of Korea Lepidobalanus for rational utilization of wood. Five species of Quercus variabilis, Q. aliena, Q. serrata, Q. mongolica, Q. acutissima belong to Lepidobalanus were investigated in this research. Relationship of anatomical characteristics to compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 21 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: I. In the proportion of wood structural elements, the factors that had the greatest influence on compression strength parallel to grain appeared to be proportion of ray in earlywood in Q. variabilis and Q. acutissima, proportion of wood fiber in latewood in Q. aliena and Q. serrata and proportion of vessel in earlywood in Q. mongolica respectively. 2. In the size of wood element and its structure, the factors that had the greatest influence on compression strength parallel to grain were microfibril angle in Q. variabilis, Q. serrata and Q. mongolica and length of wood fiber in Q. aliena and Q. acutissima.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3655-3665
• /
• 1975

This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.67-67
• /
• 2017

We developed the breeding materials with diverse grain size and shape in japonica rice. Grain size and shape are important factors affecting consumer preference and choice. However, most of Korean japonica rice cultivars have small, short, and round grain. To diversify the grain size and shape of japonica rice, we conducted the breeding program using donor parents, Jizi1560 and Jizi1581. Jizi1560 and Jizi1581 are japonica germplasm with extremely large grain. Four crosses between the each donor parents and high yielding japonica rice cultivars, Deuraechan and Boramchan, were constructed and then anther culture method was applied. We obtained 290 doubled-haploid (DH) lines with appropriated morphological traits and selected 91 DH lines with diverse grain size and shape. The grain related-traits of the selected DH lines showed a higher diversity when compared with 319 cultivars developed by NICS (264 japonica, 13 black, and 32 Tongil type cultivars). We designated the selected DH lines, four parents, and Daeripbyeo 1, large grain japonica cultivar, as the breeding materials for further analysis. The breeding materials were classified into five groups, A to E, based on the grain-related traits. Group A (including Jizi1581) and Group B (including Daeripbyeo 1) showed similar grain width, whereas Group A exhibited longer grain length and heavier grain weight. Group C (including Deuraechan and Boramchan) showed shorter and rounder grain shape and smaller grain size than any other groups. Group D including solely Jizi1560 had extremely large grain, such as the longest grain length, width, and thickness and heaviest grain weight. Group E including only two DH lines had long and slender grain shape, so that showed the highest ratio of length to width. The grain size and shape of the breeding materials exhibited beyond the characteristics of previously developed Korean japonica cultivars. The breeding materials will be applied in the breeding programs to diversify the grain size and shape of japonica rice.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.429-436
• /
• 2009

We conducted a QTL analysis of grain quality traits using 117 $BC_3F_4$ and $BC_3F_5$ lines developed from a cross between Ilpumbyeo and Moroberekan. Genotypes of 117 $BC_3F_5$ lines were determined using 134 simple sequence repeat (SSR) markers. A linkage map constructed using 134 SSR markers was employed to characterize quantitative trait loci (QTL). The 117 $BC_3F_4$ and $BC_3F_5$ lines were evaluated for eleven grain quality traits in 2005 and 2006. A total of 18 QTLs were identified for eleven traits, and the phenotypic variance explained by each QTL ranged from 9.9% to 35.2%. Moroberekan alleles contributed positive effects in the Ilpumbyeo background at two QTL loci for 1,000 grain weight. Four QTLs, two for chalky rice and one each for 1,000 grain weight and head rice were consistently detected in two consecutive years indicating that these QTLs are stable. Clusters of QTLs were observed in three chromosome regions. One cluster harboring five QTLs including head rice and brown rice ratio near SSR markers RM190 and RM314 was detected on chromosome 6. Another cluster harboring grain weight and white belly was detected on chromosome 2. Increase in white belly at this locus might be due to the increase in grain weight due to the presence of the Moroberekan allele. The Moroberekan alleles at two QTL loci, gw3 and gw4 associated with increased grain weight might be useful in breeding programs to develop high-yielding cultivars.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.323-334
• /
• 2002

The purpose of this study is to investigate which current densities and etching times will result in an optimal etching depth and surface roughness when an Ni-Cr-Be alloy is etched with 30% perchloric acid($HClO_4$). For this study, observations were made by means of an optical three-dimensional surface roughness measuring machine and a scanning electron microscope. The etchings took place under the following conditions using current densities of $300mA/cm^2\;450mA/cm^2,\;600mA/cm^2$ and $750mA/cm^2$, and using etching time of three, five, six, seven and nine minutes. Under the conditions, the experiments reached the following conclusions. 1. When the current density is above $450mA/cm^2$ and the etching time is longer than five minutes, the etching depth increased as the current density and etching time increased. And the surface roughness was significantly influenced by the interaction of the current density and etching time. 2. Under the etching conditions of $600mA/cm^2$ and five minutes, the optimal etching depth for a resin cement space and the highest surface roughness for mechanical retention were obtained. The etching depth and surface roughness were $32.86{\mu}m$ and $7.90{\mu}m$, respectively. 3. Observations under the scanning electron microscope showed that both the corrosion at the grain boundary and the corrosion within the grain occurred on the etched surface. It was also observed that the corrosion at the grain boundary became more severe as the current density and etching time increased. In addition. at higher current densities and longer etching times general corrosion appeared.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권7호
• /
• pp.946-951
• /
• 2011

The study was conducted to evaluate enzose (corn dextrose), a corn milling byproduct, as substitute for corn grain as energy in growing lambs. Five iso-caloric and iso-nitrogenous diets were formulated. The control diet (E0) had no enzose whereas enzose replaced 20, 40, 60 and 80% corn grain in E20, E40, E60 and E80 diets on the basis of energy supply, respectively. Fifty growing lambs were divided into 5 groups, 10 animals in each, in a randomized complete block design. Nutrients (dry matter, crude protein, neutral detergent fiber and acid detergent fibre) intake and digestibilities increased with gradual replacement of corn grain by enzose. Lambs fed E80 diet also retained higher nitrogen (N) than those fed E0 diet. Plasma glucose, $T_3$ and $T_4$ increased while urea N decreased in lambs receiving higher enzose content. Maximum weight gain was recorded in lambs fed diets containing maximum concentration of E as a replacement for corn grains. A better feed conversion ratio was recorded in lambs fed E80 compared with those fed E0 diet. The study suggests that enzose can be used as an economical feed ingredient to replace corn grain upto 80%, without any adverse effects on growth performance of growing lambs.

• 한국작물학회지
• /
• 제44권1호
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.