• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1744-1760
• /
• 2021

Since correlation filter appeared in the field of object tracking, it plays an increasingly vital role due to its excellent performance. Although many sophisticated trackers have been successfully applied to track the object accurately, very few of them attaches importance to the scale and rotation estimation. In order to address the above limitation, we propose a novel method combined with Fourier-Mellin transform and confidence evaluation strategy for robust object tracking. In the first place, we construct a correlation filter to locate the target object precisely. Then, a log-polar technique is used in the Fourier-Mellin transform to cope with the rotation and scale changes. In order to achieve subpixel accuracy, we come up with an efficient surface fitting mechanism to obtain the optimal calculation result. In addition, we introduce a confidence evaluation strategy modeled on the output response, which can decrease the impact of image noise and perform as a criterion to evaluate the target model stability. Experimental experiments on OTB100 demonstrate that the proposed algorithm achieves superior capability in success plots and precision plots of OPE, which is 10.8% points and 8.6% points than those of KCF. Besides, our method performs favorably against the others in terms of SRE and TRE validation schemes, which shows the superiority of our proposed algorithm in scale and rotation evaluation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.3
• /
• pp.17-29
• /
• 1995

Recently, neural network models have been employed as an alternative to regression analysis for point estimation or function fitting in various field. Thus far, however, no theoretical or empirical guides seem to exist for selecting the tool which the most suitable one for a specific function-fitting problem. In this paper, we evaluate performance of three major function-fitting techniques, regression analysis and two neural network models, back-propagation and linear-Hebbian-learning neural networks. The functions to be fitted are simple linear ones of a single independent variable. The factors considered are size of noise both in dependent and independent variables, portion of outliers, and size of the data. Based on comutational results performed in this study, some guidelines are suggested to choose the best technique that can be used for a specific problem concerned.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.271-281
• /
• 2010

Brazing fitting which is one of the aircraft hydraulic power system components is widely used for saving weight and achieving higher reliability. Any inherent defects or damage of fitting can cause system failure and/or physical damage of human body due to highly pressurized fluid. Radiographic testing(RT) technique and additional micro-structure investigation on cut-away surfaces have been accomplished to find out some defect-like-inhomogeneity in the fittings. The radiography results showed that some defect-like-inhomogeneity existed inside body. Additional micro-structure investigation on cut-away surface reveals that the inhomogeneity is due to internal voids. In this study, it can be is said that RT technique can be a useful tool for field acceptance test of hydraulic brazing fitting in short time.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1360-1367
• /
• 2016

This paper introduces a boron meter with improved accuracy compared with other commercially available boron meters. Its design includes a new fitting function and a multi-detector. In pressurized water reactors (PWRs) in Korea, many boron meters have been used to continuously monitor boron concentration in reactor coolant. However, it is difficult to use the boron meters in practice because the measurement uncertainty is high. For this reason, there has been a strong demand for improvement in their accuracy. In this work, a boron meter evaluation model was developed, and two approaches were considered to improve the boron meter accuracy: the first approach uses a new fitting function and the second approach uses a multi-detector. With the new fitting function, the boron concentration error was decreased from 3.30 ppm to 0.73 ppm. With the multi-detector, the count signals were contaminated with noise such as field measurement data, and analyses were repeated 1,000 times to obtain average and standard deviations of the boron concentration errors. Finally, using the new fitting formulation and multi-detector together, the average error was decreased from 5.95 ppm to 1.83 ppm and its standard deviation was decreased from 0.64 ppm to 0.26 ppm. This result represents a great improvement of the boron meter accuracy.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.4 s.50
• /
• pp.25-33
• /
• 2006

The purpose of this study is to develop the curve fitted equations for practicality and actual calculation during seismic performance evaluation of buried pipelines. Curve fitting for strain curve according to the wavelength of the seismic wave was produced using the non-linear least square method and the equations with the best results was suggested. In addition, a degree and coefficient of polynomial fitting equation needed to use curve fitted equation were identified. Interpreting process during the test of resistance of earthquake of buried pipelines with various end boundary conditions were provided through example questions. The results of this study were used to conduct a dynamic response analysis and a seismic performance evaluation of concrete, steel, and FRP pipes with various end boundary conditions.

• Journal of Korean Clinical Health Science
• /
• v.4 no.4
• /
• pp.662-670
• /
• 2016

Purpose. Because of a recent increase in use of soft contact lens at younger ages, in the present study, the correlation between corneal eccentricity and radius of curvature and fitting types of contact lens was investigated. Methods. The study evaluated the fitting status of targets through lens centration, push-up test, dynamic lag test and static lag test of lenses usually worn by 49 men and women (98eyes) in their 20s to 30s who put on soft contact lenses. After evaluation, the subjects were classified into 3 categories by fitting status(steep, aligment and flat). The radius of corneal curvature in the naked eyes was measured by using keratometer. Moreover the corneal eccentricity in the nasal side, temporal side, superior side and inferior side was measured by using the device capable of measuring the corneal eccentricity. Results. The radius of corneal curvature and corneal eccentricity of soft lenses worn by subjects were higher in the order of steep fitting and flat fitting, and the higher average corneal curvature radius and corneal eccentricity is intend to be more steep fitting(p=0.051, p=0.052). The corneal eccentricity showed a tendency to nasal fitting type at the higher eccentricity and temporal fitting type at the smaller eccentricity, statistically significant difference was observed(p<0.05). The study showed there were low correlation that nasal and temporal side at steep fitting, superior side at normal fitting and 4side(nasal, temporal, superior, inferior) at flat fitting, therefore when the corneal eccentricity changed the radius of corneal curvature also changed. The corneal eccentricity and the radius of corneal curvature showed statistically significant difference at 4side and each fitting types(p<0.05). Conclusions. The results of this study, the fitting status, of wearer are based on radius of corneal curvature and corneal eccentricity, and if lens fitting would be done considering that, it seems to be useful in a soft contact lens prescription.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1333-1339
• /
• 2009

A MWR(Missile Warning Radar) of GVES(Ground Vehicle Equipment System) has to effectively decide the threat for a detected target. Linear Approximation Fitting(LAF) and Weighted Linear Approximation Fitting(WLAF) algorithm is proposed as algorithm for a threat decision method. The target is classified into a threat or non-threat using a boundary condition of the angular rate, and the boundary condition is determined using probability model simulation. This paper confirms the performance of proposed threat decision algorithm using measurement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.139-148
• /
• 2009

In this study, we tried to verify the effectiveness of 3D scans of clothed participants from 20 to 24 year old men in fit analysis process. Carrying out fit analysis, we used 3D scan data and direct fit evaluation with the basic garments made as semi-fitted bodice pattern for men. The result of fit evaluation through 3D scan data showed the expert rated fitting items more positive than direct fit evaluation. Even though, generally there was a no significant difference in the response between 3D and direct fit analysis. Only there was a significant difference in the response to the specific place such as the center front line, neckline, shoulder seam, and etc. There was a no significant difference between the result of 3D scan and direct fit evaluation in the subjects' group. Also the result of assessment of 3D targeting consumers showed very positive and interested in using 3D scans for fit analysis. The ability to rotate the 3D scans for a variety of views proved to be a very effective process to analyze fit. Moreover, digital data is easily accessed at any locations and any time. Fit analysis using 3D scans could be great tool for not only fit evaluation in research but also better fitting in apparel industry.

• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).