• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.907-918
• /
• 2006

In this study capacitance and dielectric loss factor were measured with low-voltage signal and the simulation of equivalent circuits for the data was conducted. As the result it was shown that the equivalent circuit model considered the grain-boundary structure with semiconducting layer, dielectric layer and depletion layer was well approximated with the observed data. Various parameters were determined by a optimum curve-fitting method and could be used to analyze the characteristics of varistor. It also seems that the proposed equivalent circuit model will be adopted for other BL type varistors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.59-61
• /
• 2001

Polymeric suspended insulators for the electric track line have been developed. The main elements to design polymeric insulators are the insulation ability related with materials of FRP core and housing, and the optimal structure related with fitting parts and interface characteristics. To confirm the design fitness of insulator samples the electric field distribution by FEM and mechanical stress distribution by NASTRAN program was analysed with housing shed shapes and fitting structure. The leakage distance and breakage voltage properties which are core parameters to determine electric insulation ability are selected according to the requirement values of user specification, then the power frequency wet withstand voltage was specified above 22kV and the leakage distance was required above 290mm. The contamination condition of the electric track line was the heavy class according to IEC 815 in order to retain the enough safety margin against overvoltages.

• 설비공학논문집
• /
• 제11권5호
• /
• pp.579-587
• /
• 1999

The flow distribution characteristics in a complex duct system have been investigated in this paper by three means, namely experimental measurement, numerical simulation and the Extended T-method analysis. While the exit flow rates predicted by the three-dimensional CFD calculation and those given by the experiment show a close agreement, the results from the one-dimensional Extended T-method are found to differ from the experiment by -22.2% to 26.3% for the various exits. These discrepancies may be attributed to the underlying limitation concerning the fitting loss coefficients, which assume that the flow in front of the fittings is fully developed. It is proposed that, in order to analyse the three-dimensional flow distributions in a complex duct system by one-dimensional analysis such as the Extended T-method, further Improvements to the fitting loss coefficients should be made.

• 한국의류학회지
• /
• 제25권3호
• /
• pp.650-661
• /
• 2001

The purpose of this study is to suggest a guidance to select proper muslin through investigating fabric characteristics. The structural and physical properties of muslin and top fabric samples were tested by KES-FB system and other testers. And in order to examine the relation between fabric characteristics and the shape of garments, wearing tests were done with jackets made of those samples. As a result, bending rigidity(B), bending hysteresis(2HB), shear stiffness(G), shear hysteresis at=0.5(2HG), shear hysteresis at=5(2HG5), stiffness, cloth count/5cm, weight, thickness were extracted as the key factors affecting the appearance of garments. To have similar appearance, all of these should be counted. After standardizing, we calculate the variance between top cloth and muslin. And from this we could get the range that the proper muslin should be included. The ranges were as follows: Bending rigidity(B): within 0.024g.$\textrm{cm}^2$/cm(0.3$\sigma$); Shear stiffness(G): within 2.21g/cm.degree(1.3$\sigma$) Weight: within 9.33mg/$\textrm{cm}^2$(18$\sigma$); Thickness: within 0.20mm(1.8$\sigma$)

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.21-26
• /
• 2004

Characteristics of laminar lifted names in coflow jet with various coflow velocities have been studied experimently. USlI1g the fuel nozzle with d=0.254 for the pure propane, liftoff heights are fitted by using power equation with jet velocity. As coflow velocity increases up to 60 cm/s powers of fitting equation steeply decrease. From the result of numerical analysis using the FLUENT, the stoichiometry contour and the axial velocity nondimensionalized by initial jet velocity along the stoichiometry contour are changed with variations of coflow velocities, The change of axial velocity along stoichiometric contour is more sensitive than that of stoichiometric contour, For this reason, powers of fitting equation for liftoff height with jet velocity decreases with the increase of coflow velocity. Using the fuel nozzle with d=4,35 mm for the highly diluted propane by nitrogen, the liftoff height increases with the increase of coflow velocity when coflow velocity is less than the maximum value of initial jet velocity. But when coflow velocity is faster than that, the liftoff height decreases with the increase of coflow velocity.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.592-601
• /
• 2016

This paper presents the modeling of insulated-gate bipolar transistor (IGBT) in electromagnetic transients program (EMTP) simulation for the reliable calculation of switching and conduction losses. The conventional approach considering the physical property of switching devices requires many attribute parameters and large computation efforts. In contrast, the proposed method uses the curve fitting and interpolation techniques based on typical switching waveforms and a user-defined component with variable resistances to capture the dynamic characteristics of IGBTs. Therefore, the simulation time can be efficiently reduced without losing the accuracy while avoiding the extremely small time step, which is required in simulation by the conventional method. The EMTP based simulation includes turn-on and turn-off transients of IGBT, saturation state, forward voltage of free-wheeling diode, and reverse recovery characteristics, etc. The effectiveness of proposed modeling for the EMTP simulation is verified by the comparison with experimental results obtained from practical implementation in hardware.

• 한국관개배수논문집
• /
• 제17권2호
• /
• pp.71-81
• /
• 2010

Stream Pilot Project, which began in May 2003 and finished in December 2003, was selected to develop effective methods applicable to nature-like streams. Stream restoration projects aim to maintain or increase ecosystem goods and services while protecting downstream and coastal ecosystems. Fields environmental monitoring such as flow discharge and precipitation were conducted along the Idong stream for amount of channel zone change in 2007. This study selected three monitoring positions to measure the water level and discharge of flowing water. A stage-discharge relation is obtained from direct discharge measurements for three stations by fitting an empirical relationship to the data set. Since discharge measures are made only for low flow conditions, a curve of discharge against stage can then be built by fitting these data with a power curve. And this study used data obtained from floodmark checkup as well as HEC-RAS model to analyze the hydrodynamic characteristics of monitoring sites. Reach-averaged hydraulic parameters for the supply reach were calculated from the small area's HEC-RAS model for Idong stream, and a HEC-RAS model used to analyze hydraulics for a period in 2007, after the stream was considered bank stabilization.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.44-55
• /
• 1997

In order to determine procedures for a, pp.opriate model selection of technological growth curves, numerous time series that were representative of growth behavior were collected according to data characteristics. Three different growth curve models were fitted onto data sets in an attempt to determine which growth curve models achieved the best forecasts for types of growth data. The analysis of the results gives rise to an a, pp.oach for selecting a, pp.opriate growth curve models for a given set of data, prior to fitting the models, based on the characteristics of the goodness of fit test.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.63-74
• /
• 2018

The purpose of this study is to investigate the differences in riding characteristics and helmet wearing conditions between bicycle and PMV riders so that the basis data necessary for the development of suitable helmets for each group is provided. For this purpose, riding characteristics and helmet wearing conditions of bicycle and PMV users were investigated using online survey method and then the survey results were interpreted by in-depth interview conducted for bicycle and PMV users. The online survey results showed that the PMV group showed shorter driving distance and more driving frequency than bicycle group. This short driving distance was due to the limitation of battery capacity of PMVs. Helmet wearing rate was significantly lower in PMV group than in bicycle group, which was associated with relatively low chances to drive long distance on the motorway. In the PMV group, the 'urban helmets' were mainly used, in which the appearance of helmet was priorized, but in the bicycle group, the 'road cycle helmets' were mainly used, in which the light weight or ventilation were priorized. Urban helmets caused stronger pain and more fitting problems than road cycle helmets because the head shapes of Koreans were not properly applied to the helmet design. Since the fitting problem and pain intensity were the important causes that making PMV users not wear the helmets, it is necessary to develop the urban helmets reflecting the head shapes of Koreans in order to increase the helmet wearing rate of the PMV users.

• 한국지반환경공학회 논문집
• /
• 제16권12호
• /
• pp.23-35
• /
• 2015

전단파괴 이전 지반의 동적비선형거동특성은 일반적으로 함수형 피팅모델과 Masing 법칙을 이용하여 수치해석프로그램에 사용된다. 그러나 대부분의 함수형 피팅모델은 특정 전단변형률 영역에서 실험결과 대비 전단탄성계수와 감쇠비의 오차를 유발하는 것이 일반적인 현상이다. 이러한 오차의 원인은 현재 피팅모델로 표현하기 어려운 지반재료의 고유 특성에 기인할 수 있다. 지금까지 상기 문제를 해결하기 위하여 몇몇 피팅모델이 제안되었으나, 오차의 영향이 지진 시 부지응답해석에 미치는 영향은 아직까지 구체적으로 검토된 바는 없다. 본 논문에서는 상기 영향 검토를 응답이력해석을 통하여 실시하였다. 세 개의 서로 다른 함수형 피팅모델을 이용하여 부지응답해석을 시행하였으며, 그 결과는 동적원심모형시험 결과의 원형 계측치를 기준으로 검증을 실시하였다. 실험과 해석 간의 오차는 입력지진 크기가 증가함에 따라 커짐을 알 수 있었다. 저-중간 강도의 입력지진 범위에서 함수형 피팅모델에 따른 해석의 정확도 차이는 실용적인 측면에 있어서 큰 차이가 나지 않음을 알 수 있었다.