• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.10-21
• /
• 2008

The purpose of this study is to evaluate the fitness of policy topics and policy making process, the reasonableness of policy enforcement, the backing of public opinion and the results and effects of policy enforcement for the reforestation and silviculture policy in Korea. Most of the fitness of policy topics was evaluated positively, but the change of species of reforestation trees from a coniferous tree to broad-leaved tree was evaluated negatively. Most of the fitness of policy making process and the reasonableness of policy enforcement was evaluated positively, but the conflicts with other forest policy was evaluated negatively. And the limits of self-judgement of the responsible person needs to be extended. The backing of public opinion was evaluated positively but that of statesman was evaluated negatively. And the most of the results and effects of policy enforcement was evaluated positively but the economic contribution of the policy was evaluated negatively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.197-203
• /
• 2008

In this work, we present a novel genetic approach to solve the problem of combining power control and data rate transmission adjustment for the performance enhancement of the next generation CDMA system. We obtained the optimal solution of multi rate and power control problem by compromising slightly on SIR limit values. The proposed algorithm was able to handle many more users with comparable or faster convergent service. While this paper considered two kinds of fitness function such as maximizing the total transmission data rate and maximizing the acceptable mobiles of CDMA cellular network, the evaluation function combining these two cases or others can be also easily implemented. The simulation results showed the effectiveness and validity of our approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.931-940
• /
• 2006

Defect assessment of a weld zone is important in fitness-for-service evaluation of plant components. Typically a J and $C^*$ estimation method for a defective homogeneous component is extended to a mismatched component, by incorporating the effect due to the strength mismatch between the weld metal and the base material. The key element is a mismatch limit load. For instance, the R6/R5 procedure employs an equivalent material concept, defined by a mismatch limit load. A premise is that if a proper mismatch limit load solution is available, the same concept can be used for any defect location (either a weld centre defect or a heat affected zone (HAZ) defect) and for any material combination (either two-material or multi-material combinations; either similar or dissimilar joints). However, validation is still limited, and thus a more systematic investigation is needed to generalise the suggestion to any geometry, any defect location and any material combination. This paper describes the effect of structural geometry on the $C^*$ integral for defective similar welds, based on systematic elastic-creep 2-D and 3-D finite element (FE) analyses, to attempt to elucidate the questions given above. It is found that the existing 'equivalent material' concept is valid only for limited cases, although it provides conservative estimates of $C^*$ for most of cases. A modification to the existing equivalent material concept is suggested to improve accuracy.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.93-104
• /
• 2013

The purpose of this study was to develop a list of plants that adapted to the aquatic environment in urban areas based on the list of plants surveyed through literature review and field surveys, and to classify the types of vegetation according to the five categories of plant distributions set by the U.S. Fish and Wildlife Service (1988) in the aspect of the adaptability of plants to the aquatic environment. Results of the classification by category according to the adaptability to the aquatic environment for the plant species surveyed through literature review and field surveys showed that there are 45 species of OBL, 96 species of FACW, 66 species of FAC, and 94 species of FACU, totaling 650 species. In addition, a total of 50 species excluding exotic species, endangered species, and naturally introduced plants are proposed as appropriate plants for the urban aquatic environment that will be artificially constructed. The results of the study can be utilized as the basic information for maintaining diversity and stability of the ecosystem during the restoration of water ecology; they can serve as useful data for the development of an optimum vegetation model when planting in water spaces in the future and preparing proper planting plans for each space. In addition, it is believed that the information will be useful in wetland identification and evaluation by observing plant species that appear only in wetlands.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.34-39
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally condrcted by using S-N curves, as specified in the codeds and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02 ). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• v.6 no.1
• /
• pp.69-74
• /
• 2003

Recent deepwater offshore structures in the Gulf of Mexico utilize butt welded tubular joints. Application of a welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical, as the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimation of the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves, as specified in the codes and standards. Applying the stress concentration factor of the welded structure to the S-N approach often results in a very conservative assessment, because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fatigue life analysis using fracture mechanics has been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. Still, there is inconsistency when designing tubular joints using a conventional S-N approach and when specifying weld flaw acceptance criteria using fracture mechanics approach. This study developed fatigue curves that are consistent with both the S-N approach and the fracture mechanics approach. Accounting for non-uniform stress distribution and threshold stress intensity factor were key parameters in relating both approaches. A series of S-N curves, generated from the fracture mechanics approach, were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02). The new curves for tubular joint agree very well with the experimental results. The comparison also indicated the degree of conservatism built into the API X design curve.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1389-1397
• /
• 2016

This study was to evaluate opportunities for the commercialization of smart insole. smart technology is evolving to Insole. Pressure-sensitive sensor or an acceleration sensor is applied to create a balance of the feet and body, is also evolving for entertainment (sports, entertainment, etc.) and health care. Moreover, smart insole can fix an incorrect walking habit by sending a weight value measured by the sensor on a smartphone and during the movement, smart insole helps to correct body balance by measuring the center of gravity moving condition. However, smart tendency of the insole has yet to create a clear boundary in the entertainment and healthcare markets. This is because the fitness band, smart socks, smart shoes can also replace the benefits of a smart insole. Interestingly, the business opportunities are appearing more frequently in health care solution service of electrocardiogram, body temperature, blood pressure, etc., rather than smart devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4437-4446
• /
• 2013

The purpose of this study was to development and evaluate the effects of cardiocerebrovascular disease prevention program for taxi drivers on physiological variables(blood pressure, blood sugar, serum lipids) and physical variables(body fat, muscle endurance, cardiopulmonary endurance, balance). This study consisted of two phases: developing the program and evaluating its effectiveness. 1 phase, 321 taxi drivers investigated a health condition and a life habit and an educational need and developed a program with the ground which will reach. 2 phases, The effectiveness of the program was tested in October 2011, with 51 taxi driver. The experimental group was given 12 weeks period exercise 1 weeks 3 time, disease education 4 time, 2 nutrition consultations. Although there was no significant reduction in blood pressure, heart rate, blood sugar, serum lipids, there were statistically significant increases in muscle endurance (t=-7.62 p<.001), cardiopulmonary endurance (t=-3.39, p<.001), balance(t=-4.13, p<.001) and decreased body fat (t= -3.11, p<.015) in before compared to after. These findings suggest that an integrated cardiocerebro-vascular disease prevention program improves physical fitness.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.477-488
• /
• 2018

Objectives: The purpose of this study was to investigate career competency, tasks, and job satisfaction of public servants, public institutions, and researchers. Methods: The survey was conducted about career competency, job satisfaction, and satisfaction on work life. Next, they interviewed on the characteristics of each job by two or three dimensions. The following conclusions were obtained from July to August 2017. Results: Career competencies were GPA with 3.87, 818 points of TOEIC score, and ITQ certification. Public servants required the information on literacy skills for employment and job performance, while civil servants need more than one year of clinical experience in the dental hospital. The non-commissioned officer needed a written test and fitness training. The health insurance review and assessment center required more than one year of experience from general hospital or medical institutions. Researchers required a research career, language skill, and professors required research and teaching experiences with clinical experience more than three years. The main job tasks were as follows; for public servants, they were official document processing and community projects. For the civilian workers and military/noncommissioned officers, they were medical assistant and administrative works. The employees of the health insurance review and assessment service are examining the medical expenses and the medical examination, the researchers are experimenting, researching and writing articles, and the teaching staff are lecturing and conducting individual research. Conclusions: The results of job satisfaction survey showed that occupational satisfaction was the highest in civil servants, researchers, and teaching professions. Job security was the highest in health workers and health inspectors' evaluation centers, and time vacancy was the highest in civilian workers and military/noncommissioned officers. If you want to work in such an institution, you should prepare elements that match your basic literacy and job specific characteristics. And we should try to increase the satisfaction of work even after work.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.3
• /
• pp.83-96
• /
• 2021

Objective : This study aimed to determine Korea-type family function factors that affect individual growth and social activities, and examine check the appropriate contents and domestic culture components based on the McMaster model, a family function evaluation tool, through the Delphi technique. Methods : The Delphi technique was applied to 12 expert panels in fields related to family function. The period lasted 9 weeks, from May to June 2020. The Delphi survey was conducted twice. In the first survey, the domestic culture and appropriate contents of the McMaster model were selected and localized, and expert' opinions about the components were collected using closed and open-ended questions. In the second survey, the fitness and importance of the components were investigated. Results : As a result of the first Delphi investigation, 18 items were deleted from the 53 items presented. After adding 11 items and excluding any overlapping items, a total of 40 items were selected. Subsequently, sentences that were difficult to understand were revised to familiar vocabulary. A second survey was constructed, with an example sentence. In the second Delphi investigation, 33 items were selected. The average content validity ratio for the final selected component was 0.76, and the stability was 0.28. Conclusion : Family function and the factors influencing domestic family function identified though this study can be used to conduct family function evaluations and interventions in clinical sites or relevant research studies.