• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.347-357
• /
• 1998

The objective of this study was to present the proper criteria which could be efficiently used for dividing the land-use zones in Korean national parks. Delphi technique was employed to collect data for this study. The Delphi process was designed with 3 round questionaries for Korean panel experts. A list of 30 criteria was obtained to be considered in dividing land-use zones. From the results, the biological category, in which 10 criteria were involved, occupied the most part of them. This means that the panels consider the biological criteria to be the most important ones under the serious situation of environmental deterioration. Using the 30 criteria emerged from this study, it could be possible to analyze the fitness of the existing land-use zoning system. Prior to the application of these criteria to each park, however, the areal characteristics should be surveyed to select the proper criteria. The new zoning system based on the regional characteristics of each park could be efficiently utilized for management of Korean national parks.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.63-74
• /
• 2012

In Korea, grouting has been mostly designed and constructed by experiences without expert knowledge and theoretical study. So there are a lot of problems related to the quality and safty of grouting. Therefor, in this paper the quality management skills and method were discussed through out by using the auto-grouting method and field test of grouting for the construction. Through the limit water injection test of the soil, it make the optimum injection pressure and injection speed of grouting, and through the lugeon test of the rock, it make assess the permeability of before and after grouting. In order to prevent the hydraulic fracture of soil and break away from the grouts if it apply four kinds of mode of grouting stop criteria, injection effects can be improved. From the above characteristcs designers evalute the fitness values of injection pressure(p), injection speed(q) and grouting penetration time(t). So far, to record and manage pressure(p) and speed(q) of grouting autographic devices such as intergation flow-meter usually record data in a roll of paper. Intergration flow-meter can record grouting flow quantity exactly, but the recorded pressures differ from the any basis such as intitial, intermediate and final point. Therefore, it has been argued that is a need of reliable method to describe the connection between the pressure recorded by an intergration flow-meter and the special properties of the grouting target ground. auto-grouting method can describe the reliable connection between the grouting pressure and the special properties of the grouting target ground. So, in this paper by using auto-grouting method, it is expected that to secure basis of quality control techniques construction.

• Journal of Korean Society of Forest Science
• /
• v.83 no.1
• /
• pp.50-62
• /
• 1994

This study is performed to consider the fitness of natural regenerating method and tending methods used now by surveying the stand structure and regenerating states of the 9 natural regenerated Pinus densiflora stands in Kangwon province. As a special consideration, it deals with the tending methods on the seedlings of Pinus densiflora and broad-leaved tree(Quercus mongolica) under competition. By the consideration on the number of trees, growing capacity and stand structures of Pinus densiflora stands, it reveals that Pinus densiflora is in the inferior in numbers at the competition to the broad-leaved species, and it could not occupy the stands as the dominant species if the stands were not tended. It is estimated that natural regeneration of Pinus densiflora stands by the clearcutting or seed tree system could not achieved due to the abundance of ground vegetation. Short-term shelter-wood system or strip stand method may be proposed as a successful method of natural regeneration. As the visible tending method for seedlings, the method which apply the mixed forest in group of Pinus densflora and Quercus mongolica different by the growing capacity and distribution characteristics is better thaw the one which tend the Pinus densiflora only.

• Reproductive and Developmental Biology
• /
• v.29 no.1
• /
• pp.43-48
• /
• 2005

To search of a new porcine pheromonal odorants for biostimulation control system technologies to offer a potentially useful and practical way to improve reproductive efficiency in livestock species, the holographic quantitative structure activity relationship (HQSAR) model between odorants, 2-phenoxytetrahydrofurane (A), 2-cyclohexyl-oxytetrahydrofurane (B), derivatives and binding affinity constants (p[Od.]/sub 50/) for porcine odorant-binding protein (pOBP) as receptor of pig pheromones were derivated and disscused. The binding affinity constants of cyclohexyl substituents (A) for pOBP were higher (A>B) than that of phenyl substituents (B). It was revealed that the optimum HQSAR model XI using PLS analyses had a fragment length (5∼8) with chirality at 5 components and hologram length 97 bin, which had a cross-validated q²(predictablities) of 0.916, and a conventional correlation coefficient r² (fitness) of 0.988, respectively. From the atomic contribution, the C3 and C5 atom in 2-oxyfuryl group contributed to binding affinity constants, whereas the central carbon atom in tert-butyl group on the cyclohexyl ring and the C4 atom of furyl group parts showed no contribution.

• Journal of Trauma and Injury
• /
• v.24 no.2
• /
• pp.98-104
• /
• 2011

Purpose: The aim of this study was to evaluate the quality of the trauma care system of our hospital, in which emergency physicians care for major trauma patients in the emergency intensive care unit (ICU) in consultation with intervention radiologists and surgeons. Methods: This was a retrospective observational study conducted in an emergency ICU of a tertiary referral hospital. We enrolled consecutive patients who had been admitted to our emergency ICU with major trauma from March 2007 to September 2010. We collected data with respect to demographic findings, mechanisms of injury, the trauma and injury severity score (TRISS), emergency surgery, angiographic intervention, and 6-month mortality. Then, we compared the observed and predicted survivals of the patients. The Hosmer-Lemeshow test and calibration plots by using 10 groups, one for each decile, of predicted mortality were used to evaluate the fitness of TRISS. P-values of greater than 0.05 represent a fair calibration. Results: Among 116 patients, 12 (10.34%) were dead within 6 months after admission to the ICU, and 29 (25.00%) and 38 (32.80%) patients received emergency surgery and angiographic intervention, respectively. The mean injury severity score and revised trauma score were $36.97{\pm}17.73$ and $7.84{\pm}6.75$, respectively. The observed survival and the predicted survival of the TRISS were 89.66% (95% confidence interval [CI]: 84.03~95.28%) and 69.85% (95% CI: 63.80~75.91%), respectively. The calibration plots showed that the observed survival of our patients was consistently higher than the predicted survival of the TRISS ($p$ <0.001). Conclusion: The observed survival for the trauma care system of our hospital, in which emergency physicians care for major trauma patients in the emergency ICU in consultation with intervention radiologists and surgeons, was higher than the predicted survival of the TRISS.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.37-44
• /
• 2016

The aim of the present study was to compare the strength, balance, and flexibility across two age groups (older adults vs. young adults). The isokinetic muscle function, ankle ROM, trunk forward flexibility, stability, and antropometric data for the elderly and 46 university students were collected. The results indicated that male older adults possessed relatively low flexibility (2.97cm) among the groups and showed better stability in the right foot than in the left foot and $35^{\circ}$ of plantar flexion ROM, which was not in the normal range. Their peak strength at the knee joint was below 50% of their counterpart. They revealed a hamstring deficit of 18.55%, ankle eversion deficit of 23.08%, and ankle inversion deficit of 19.19%. The results indicated that female older adults possessed comparable flexibility compared to female young adults. The reciprocal muscle strength ratio of both knees was under 50%, and the deficit was 14.32% (extension) and 19.73% (flexion). The ankle plantar flexion peak torque was approximately 62% (left) and 73% (right) of WS's. The ankle dorsi flexion deficit was 25.05% and the plantar flexion was 26.86%. The eversion deficit was 19.97% and the inversion was 21.09%. These results will be significant in establishing an elderly fitness enhancement program and policy.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.4
• /
• pp.35-49
• /
• 2004

The purpose of this study was to analyze variables associated with smoking and selected health behaviors. This study targeted adult men and women over 20 of age. The sample population was drawn from the national sample, and the samples were chosen from the telephone book. A total of 1,500 cases were collected through a telephone based interview survey. As a tool for this study, a structured questionnaire was developed. the variables included self-perceived health status, and selected 7 health behaviors; smoking behavior, physical activities, eating habit, weight control, alcohol consumption, stress management, and cancer exam. The healthy life practice actions of Trans-theoretical model have been classified into five stages. Smokers were more likely than non-smokers to positive attitudes toward smoking and the impact of smoking in this study. This means that smokers's awareness toward the impact of smoking is very week. Smoking behavior was significantly related to other health related behaviors based on the correlation analysis. However, gender, engaging in regular physical activities, moderate consumption of alcoholic beverages, and receiving a cancer examination were the variables that can explain and predict a person's stages of adopting a non-smoking behavior. Self perceived health status was closely related to other health behaviors. Gender, age, and monthly household income were important demographic variables that have significant relationship with the self-perceived health status. Among the health behaviors, regular physical activities and weight control were significant predictable variables. Similar results have been found in the National health and Nutrition examination survey in Korea. As a result of this study, it was found that among the selected health behaviors, engaging in physical activity was an important variable to increase positive sense of health and non-smoking behaviors. Educational and policy level input is needed to increase awareness and provide chances to participate in fitness activities. To those who maintain exercise, the environmental support and diffusion of knowledge information and education data should be strengthened. To change attitudes toward smoking, more in-dept awareness campaign and education should be provided according to people's different behavioral status. In addition, not only diffusing health education data and delivering knowledge information through related programs, but also environmental support system that helps an individual maintain his/her action is required. Such a support system means settlement of the health enhancement base of school, workplace and community should be carried out, and the policy level support and regular programs should be provided and spread to the unit of community.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.29-37
• /
• 1999

In general, the information processing capability of a neural network is determined by its architecture and efficient training patterns. However, there is no systematic method for designing neural network and selecting effective training patterns. Evolutionary Algorithms(EAs) are referred to as the methods of population-based optimization. Therefore, EAs are considered as very efficient methods of optimal system design because they can provide much opportunity for obtaining the global optimal solution. In this paper, we propose a new method for finding the optimal structure of neural networks based on competitive co-evolution, which has two different populations. Each population is called the primary population and the secondary population respectively. The former is composed of the architecture of neural network and the latter is composed of training patterns. These two populations co-evolve competitively each other, that is, the training patterns will evolve to become more difficult for learning of neural networks and the architecture of neural networks will evolve to learn this patterns. This method prevents the system from the limitation of the performance by random design of neural networks and inadequate selection of training patterns. In co-evolutionary method, it is difficult to monitor the progress of co-evolution because the fitness of individuals varies dynamically. So, we also introduce the measurement method. The validity and effectiveness of the proposed method are inspected by applying it to the visual servoing of robot manipulators.

• Journal of KIISE:Software and Applications
• /
• v.29 no.5
• /
• pp.295-310
• /
• 2002

Software architecture representing a common high-level abstraction of a system can be used as a basis for creating mutual understanding among all stakeholders of the system. In determining a software architecture's fitness with respect to its desired qualities as well as in improving a software architecture, software architecture evaluation is importantly performed. However moat of architecture evaluation methods are not still sufficient in that they do not explicitly consider artifacts discussed during architecture evaluation and their processes are net systematic. As a result, we are hard to follow them. To address these problems, this paper presents the method to evaluate systematically a software architecture with respect to its desired qualities. In this approach, the functional and non-functional requirements are separately handled, and software architecture is represented in the 4+1 view model using UML. Through this initial consideration, the important artifacts such as goals, scope, and target of evaluation are clearly determined. Also, the method provides the well defined process to produce the important evaluation artifacts such as sub-designs, design decisions, rationale, qualities from inputs. In addition, it enables us to determine satisfaction of a architecture with respect its desired qualities or improve a architecture through the structured evaluation results.