• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.461-462
• /
• 2013

• 한국음향학회지
• /
• 제9권2호
• /
• pp.14-24
• /
• 1990

본 논문에서는 열박음 부분을 모델링하여 그 부분에서의 단위길이당 스프링강성을 산정한다음 전달매트릭스를 구하였다. 여기에 MYKLESTAD 방법을 토대로 하여 축의 전달매트릭스를 구하였다. 열박음축에 대해서는 수축공차에 따른 고유진동수를 구하였으며, 열박음효과의 효율성을 위하여 똑같은 크기의 열박음 하지 않은 축과 비교검토 하였으며 이를 실험으로 검토하였다. 연구결과 수축공자가 커지면 커질수록 단위길이당 스프링강성은 증가 하였고 고유진동수도 증가하였다. 그리고 열박음축은 열박음 하지 않은 축보다 고유진동수가 감소하였다.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.300-302
• /
• 2007

• Journal of the Korean Data Analysis Society
• /
• 제20권6호
• /
• pp.2721-2731
• /
• 2018

This study purposes to derive the predictive model for the cold tolerance of Brassica napus, using the data collected in the Tree Breeding Lab of Gyeongsang National University during July and August of 2016. Three Brassica napus samples were treated at each of low temperatures from $4^{\circ}C$ to $-12^{\circ}C$ by decrement of $4^{\circ}C$, step by step, and electrolyte leakage levels were measured at each stage. Electrolyte leakages were observed tangibly from $-4^{\circ}C$. We tried to fit the six nonlinear regression models to the electrolyte leakage data of Brassica napus: 3-parameter logistic model, baseline logistic model, 4-parameter logistic model, (4-1)-parameter logistic model, 3-parameter Gompertz model, and (3-1)-parameter Gompertz model. The baseline levels of the electrolyte leakage estimated by these models were 4.81%, 4.07%, 4.19%, 4.07%, 4.55%, and 0%, respectively. The estimated median lethal temperature, LT50, were $-5.87^{\circ}C$, $-6.31^{\circ}C$, $-6.05^{\circ}C$, $-6.35^{\circ}C$, $-4.98^{\circ}C$, and $-5.15^{\circ}C$, respectively. We compared and discussed the measures of goodness of fit to select the appropriate nonlinear regression model.

• 한국의류학회지
• /
• 제34권10호
• /
• pp.1632-1646
• /
• 2010

This article is an analysis of the fit preference of the knitted jacket according to body types for 30's and 40's adult women through a comparison of real and virtual fit. A five point likert scale was used to evaluate the degree of the preference of real and virtual fit. The data were analyzed with t-test and ANOVA using statistical program SPSS 17.0. The results are as follow. 1. The real and virtual fit preference of the knitted jacket according to body types indicates that respondents preferred pattern 2 for body type N than the rest of the patterns; however, respondents preferred pattern 3 for body type A and H. 2. There were no significant differences between real and virtual fit preference. 3. It is necessary that the knitted jacket follow a similar size tolerance like a woven jacket. The results show that the next generation of virtual try-on systems need the development of a minus clothing ease scale.

• Industrial Engineering and Management Systems
• /
• 제6권2호
• /
• pp.94-105
• /
• 2007

Measurement technology plays an important role in discrete manufacturing industry. Probe-type coordinate measuring machines (CMMs) are normally used to capture the geometry of part features. The measured points are then fit to verify a specified geometry by using the least squares method (LSQ). However, it occasionally overestimates the tolerance zone, which leads to the rejection of some good parts. To overcome this drawback, minimum zone approaches defined by the ANSI Y14.5M-1994 standard have been extensively pursued for zone fitting in coordinate form literature for such basic features as plane, circle, cylinder and sphere. Meanwhile, complex features such as torus have been left to be dealt-with by the use of profile tolerance definition. This may be impractical when accuracy of the whole profile is desired. Hence, the true deviation model of torus is developed and then formulated as a minimax problem. Next, a relatively new and simple population based evolutionary approach, particle swarm optimization (PSO), is applied by imitating the social behavior of animals to find the minimum tolerance zone torusity. Simulated data with specified torusity zones are used to validate the deviation model. The torusity results are in close agreement with the actual torusity zones and also confirm the effectiveness of the proposed PSO when compared to those of the LSQ.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.571-572
• /
• 2011

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.1-7
• /
• 2014

In this paper the structural analysis of a planet carrier was carried out for the design optimization of a slewing reducer used in tower cranes. The stress changes of the planet carrier according to the tolerance of interference fit were investigated, and the strength was evaluated on the basis of the stress level. The analysis results showed that the tolerance of interference fit have an important influence on the stress level of the planet carrier. To guarantee the static safety of carrier, the tolerances of carrier pinhole and planet pin as well as loading level exerted on the planet carrier should be determined considered correctly.

• 농약과학회지
• /
• 제9권3호
• /
• pp.231-236
• /
• 2005

본 연구는 생산단계의 딸기에 4가지 살균제(tolclofos-m, folpet, procymidone, triflumizole)를 수확 10일전 안전사용 기준량으로 처리한 후 잔류량을 파악하였고, 이것을 근거로 6 가지 kinetic models(first order, zero order, second order, power function model, elovich model, parabolic model)에 따른 반감기를 비교하였다. 최적의 모델로 판명된 first order kinetic model로부터 구한 반감기를 이용하여 생산단계잔류허용기준(field tolerance)을 설정, 제시하였다. 잔류분석법의 적합성 판단을 위한 회수율 실험에서는 $85.1{\sim}105.0%$ 범위를 보였으며, 4 가지 약제 모두 약제 처리 5일 후 평균 73% 이상 소실되었다. 잔류량과 시간과의 상관관계는 first order kinetic model에서 가장 높은 결정계수값을 보였으며, 이를 이용하여 산출한 반감기로 생산단계 잔류허용기준(안)을 설정하였다. 이와 같은 결과는 최적의 kinetic model로 반감기를 산출해야 한다는 이론적 근거를 제시하는 것이며, 수확 후 또는 유통 중의 잔류허용기준뿐만 아니라 생산단계에서도 허용기준을 마련하여 부적합 품목을 사전에 차단할 수 있는 기준설정의 예로서 안전 농산물 공급과 농가소득에 크게 기여할 수 있는 기초자료가 될 것이라 사료된다.