• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.126-137
• /
• 2020

This study collected and analyzed the fishing process of existing fishing boat and newly built fishing boat by using the video observation methods to understand the improvement of fishing operation efficiency and safety according to the scale change of coastal composite fishing boat. The fishing operation efficiency was calculated by analyzing the frequency of movement, the movement distance and the moving time per basket used in the fishing process to derive the improvement of the newly built fishing boat compared to the existing fishing boat. It was confirmed that the mean frequency of movements decreased to 13.9%, the average moving time decreased to 21.8%, the mean movement distance increased to 20.5% and the movement through the top of gunwale did not occur. Movement of frequency, increased and time according to the fishing operation were directly affected by the width of side passages and the presence or absence of walking obstruction such as bulwark stay, hatch coaming and fishing gears on deck. The results of this study are expected to be used as basic data for redesigning into a safe and efficient coastal composite fishing boat in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.65-72
• /
• 2018

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.2
• /
• pp.162-183
• /
• 1998

The fisheries resources control system in the Fisheries Act of Korea is introducing technical management method and input control method that controls fishing effort. Fishing effort control system of Korea aiming at realizing the maximum sustainable yield does not regulating the limitation of fishing quota and the limitation of fisheries object target fish. Therefore fishing operators who have fishing permit can use fishery resources without any restriction of fishing quota. But there are no rules that can controlling capacity of productivity of fishing by developing of fishing technic and fishing gear. For those reasons, productivity of fishing is superior to reproductivity of fisheries resources. Therefore, the Fisheries Act of Korea rearranges a legal basis for an introduction of fisheries resources management system by TAC, but the contents to be possible for a legal guarantee is not included and it is exceedingly defective as abstract and institutional devices. And that the affairs to be required for an enforcement of the said regime was placed in an administrative mandatory legislation and the danger to be degenerated is high in accordance with the bureaucratic self-righteous and/or the coercion of group's interest concerned and accordingly its substitute legislation system is keenly required. TAC system that is going to be introduced in our country is expected to enforce the Olympic fishing method and the individual quota method in parallel. This method is not certainly proper, because it occurs to overcapitalize and to compete fishing amounts between fishery operators. So as to prevent overcapitalization and fishing competition between fishery operators, and the exhaustion of coastal fisheries resources, individual transferable quota system should be introduced in Korean sea. Accordingly this thesis has attempted to constitute a view to improving problems of the traditional fisheries resources control system and introducing TAC fisheries resources control system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.1
• /
• pp.65-76
• /
• 1999

Our status of off-shore stow-net fishery is in face with many difficult problems; the lack of fisherman by evading the 3-D occupation, the safety accident by unskilled crew and old type fishing system. In order to solve those problems, it is necessary to save the man power and ensure the safety of fishing work by the effective utilization of power and automatization of fishing gear system. This is consists of the side drum driven by main engine, the net hauler, the bow and stern capstan, jib crane etc. Therefore, we suggest the design on unification of power device of fishing gear system as follows; (1) fishing system by uni-hydraulic power and (2) fishing system by electric motor and electro-hydraulic power.

• The Journal of Fisheries Business Administration
• /
• v.28 no.1
• /
• pp.1-26
• /
• 1997

The Proposal of this paper is to draw up solution about fishing disputes in Korea coastal waters. Small fishing vessels under 8 metric tons which is regulated by the provincial governors, must operate within provincial boundary on the sea as in fishery policy of Korea. on this, I think that the present situations of fishing disputes have related to the fishing license system. Problem of this kind, Before 1970's, fishing disputes rarely took place, and it, if any, did not bring any social conflicts or disputes. Since 1980's, some of fishing disputes have been reported within fisheries society Recently, The disputes have been increasing to become social conflicts between local people concerned and have evoked an argument on whether the provincial boundary on the sea exists. If such disputes continues to increases or remains unsolved, they will bring a tremendous social cost such as an accelerated decrease in fish resources, degradation of fishing grounds, disorder in fishing, destruction of fisheries culture and so on. The reasons for the growing disputes can be specified as fellows : the degradation of fish resources, the present fishing license system which inherently causes competitions in fish catching, irrational ceiling system of fishing vessels, legal problem on existing boundary between neighbouring two provinces, the functional problem of national or regional fishery coordination committee which has been established to coordinate general fishing disputes. This study has also dealt with Japan's experiences in fishing disputes which has the history of more than a hundred years and its coordinating mechanism. In the discussion section, some possible solutions have been briefly touched fer further study.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.76-81
• /
• 2002

The purpose of this study is to set up the optimum economical formation of the purse seiner fishing system. For this task, the characteristics of existing purse-seiner fishing system were reviewed, and the possible formations of the fleet in tile purse-seiner fishing system were examined through the reallocation of function for each individual vessel. In addition, economic evaluations of the possible formations of the fleet are carried out. Consequently, it was found that 2-vessel formations have the most economic efficiency. Then, a conceptual system design for the main vessel in the 2-vessel formations was performed. As a result, this paper can be used as a helpful guideline to develop the most profitable and economical fishing system in the fleet type fishery.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.101-106
• /
• 2005

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.97-103
• /
• 2006

The integrated navigation system(INS) for fishing boat which organized the marine radar, global positioning system(GPS) compass, automatic identification system(AIS), echo sounder, GPS and electronic nautical chart(ENC) was manufactured to reduce the marine accidents of fishing boats occurred frequently at coastal and offshore. The application possibility of INS for fishing boat was examined for basic experiments in the sea. Integration display of various information, such as other vessel's behavior, depth, own vessel's position etc. was done to help the operate user who understood the circumstance around own boat. Therefore, the system will be utilized as a useful equipment for safety voyage and fishing work on the fishing ground.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.12-24
• /
• 2000

The electro-hydraulic servo winch system built in a automatic tension control equipment was designed with a latent need for an advanced system in fishing operations of the inshore and coastal fishing vessels. In order to keep the constant tension condition of warp under loading, a tension control circuit was added to the servo winch system.The dynamic performance in the open loop behaviour of the designed winch system was investigated and its applicability was tested for various possibilities of load using a load generator especially developed in order to this study.The mechanical characteristics of this system is different from that of a conventional type, that is, the tension, length, line speed and drum revolution can be automatically controlled by the information from various sensors, such as torque, rpm and pressure transducers. from the experiment results, it was verified that the servo winch system has very good output and tracking behaviour for the control input signals in different operating conditions though overshoot of out 8% in the transient characteristics of torque under the load though a overshoot of about 8% in the transient characteristics of torque under the load condition can be observed when the opening of servo valve, adjustable by the input voltage between - 10 V up to 10 V, changed suddenly.Consequently, the improved fishing winch system can be effectively used as the automatic shooting and hauling equipment of low cost for small inshore and coastal fishing vessels which engage in net fishing.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.111-116
• /
• 2004

A fishing gear is an used tool to achieve fishery effectively. Especially, long line is fishery method to confect branch line to fixed space to main line and bind fishhook 1 in branch line end. This paper presents the design and implementation of fishing gear type setting system for fishing gear layout management in the long line work. In this paper, we design overall fishing gear type setting system. For this purpose, the modules such as system user and communication environment setting module, fishing gear type setting module, module of fishing gear shooting model are designed and implemented. For the validity evaluation of this paper, fishing gear type design and shooting process are implemented and tested.