• 한국해양환경ㆍ에너지학회지
• /
• 제8권4호
• /
• pp.220-226
• /
• 2005

본 논문은 2002년-2004년 하계에 동중국해의 해저에 침적된 폐기물의 분포량 및 조성을 평가한 연구로서, 트롤 조업위치와 소해면적에 따라 다소 불규칙하지만, 폐기물의 종류가 다양하고 분포량이 높은 것으로 평가되었다. 수집된 폐기물의 년도별 평균값은 약 $31-43kg/km^2$ 범위였고, 지점별 분포밀도는 $0-110.3kg/km^2$ 범위로 제주도 인근 북서쪽에서 최대를 나타내었다. 폐기물 종류로는 어망, 문어단지, 통발, 드럼, 비닐과 목재 등이 많이 확인되었고, 어구, 비닐과 플라스틱 등에서는 한국, 중국과 일본 상표가 다수 확인되어 이 지역의 폐기물 분포는 한 중 일간에 어업 조업 및 선박운항 그리고 육상 유입과 밀접히 관련이 있는 것으로 판단되었다. 침적된 폐기물 중 어망, 통발, 문어 단지와 낚시줄 등 어구관련 물질(Fishing gear)들이 42-72% 범위로 대부분을 차지하였고, 이것은 조업 중에 또는 후에 해양으로 고의적 또는 비고의적으로 투기되어 발생되는 것으로 평가되었다. 또한, 로우프와 드럼은 0-30%로 단위면적당 분포량 변동이 컸고, 고무, 플라스틱, 금속, 목재, 직물류 등은 C5를 제외하고는 대략 25% 이내를 차지하는 것으로 조사되었다. 따라서, 동중국해를 포함한 한반도 주변해역에서의 해양 폐기물에 대한 종합적 대책수립을 위해서 지속적인 모니터링과 연구가 필요하다.

• 수산해양기술연구
• /
• 제55권1호
• /
• pp.82-93
• /
• 2019

The International Labor Organization (ILO) selected fishing as the most dangerous group of jobs in the world, and it is well known in Korea as a 4D industry. Offshore large purse seine accounts for the largest portion of the fishing industry in the coastal region with high death rate and the accident rate. The repeated disaster rate survey by the Korea Maritime Institute (KMI) shows offshore large purse seiner is the highest at 22.3 percent and coastal gill nets and offshore stow net are following at 12.4 percent and 11.9 percent in order. Therefore, risk factors occurring in offshore large purse seiners were analyzed based on data from the National Federation of Fisheries Cooperatives (NFFC) for three years from 2015 to 2017 and 4M (Man, Machine, Media, Management) 3E (Engineering, Education, Enforcement) techniques were used to provide a safe fishing environment. The number of accidents on offshore large purse seiners each year was more than 150, and the number of accidents on every fishing boats was as high as 17 percent in 2015. If the accident rate and the risk level were divided by insurance, the accident resulting from contact with machinery was the highest, and the risk of a contact with gear was low but frequently occurring. This was caused by collisions and contact with gear in situations where death and disappearance risk are not high, and accident types in situations where death and loss risk are considered to be contact with machinery, falls or other accidents. Through these analysis techniques, the frequency and risk of each type of accident on a offshore large purse seiners can be demonstrated, and it is expected to raise awareness of a safer fishing environment and contribute to the reduction of accidents.

• KDI Journal of Economic Policy
• /
• 제12권1호
• /
• pp.93-110
• /
• 1990

우리나라의 수산정책(水産政策)과 원양어업관련(遠洋漁業關聯) 정부규제(政府規制)는 과거부터 연안어업보호(沿岸漁業保護)와 기존사업자간의 이해조정을 위해 제한적이고 간섭적인 요소가 많이 존재하고 있다. 이는 사업자들의 기술개발(技術開發) 및 비용절감(費用節減) 의지(意志)를 약화시켜 산업의 장기적 체질강화(體質强化)를 위해서도 바람직하지 않을 뿐 아니라, 사업자간의 형평문제(衡平問題)도 야기하고 있는 실정이다. 또한 오랜 동안 누적되어온 어가안정정책(魚價安定政策)은 국내어가(國內魚價)의 상승을 초래하여 국민경제적 부담이 되고 있을 뿐 아니라, 어업의 산업구조조정(産業構造調整)을 지연시키고 연안(沿岸) 어자원(魚資源)의 고갈을 촉진시키는 한 요인이 되고 있다. 이 연구에서는 현행 원양어업(遠洋漁業) 관련정책(關聯政策) 정부규제(政府規制)의 문제점을 검토하고 원양어업의 장기적 발전과 자율화의 추세에 부응하기 위한 정부규제(政府規制)의 개선방안(改善方案)을 제시하고자 하였다. 주요개선방안으로는 허가과정(許可過程)의 객관화(客觀化)와 투명화(透明化)를 보장하기 위한 의무허가제(義務許可制)의 도입과 이를 통한 연근해어업(沿近海漁業) 구조조정기금(構造調整基金)의 조성, 허가조건 및 업종구분의 단순화와 어선확보(漁船確保)에 대한 규제의 완화를 통한 경영합리화(經營合理化) 여건의 조성, 신어장개척(新漁場開拓)에 대한 유인제공 등을 제시하고 있다.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.218-228
• /
• 2008

This paper describes on the real-time tracking of ship's dynamic behavior by AIS information in the coastal waters. The AIS data was received at a land station by using the antenna of AIS receiver mounted on the rooftop of the laboratory, Pukyong National University (PKNU), Busan, Korea, and stored as a NMEA format of serial output sentence of VDM(VHF Data-Link Message) and displayed on the ENC(Electronic Navigational Chart) of a PC-based ECDIS. In this study, the AIS receiver was mainly used to obtain the dynamic information that is necessary to evaluate and track the movement situation of training ship "KAYA" of PKNU in the coastal waters. The change of position with time for the ship turning under the rudder angle of port $30^{\circ}$ was correctly tracked with the turning circle of 940 m in diameter on the ENC of a PC-based ECDIS. Then, the dynamic information of the AIS system was updated every 6.29 seconds under the turning situation for the speed of 10.9 knots and every 21.65 seconds under the situation running at the speed of 11.05 knots on the straight line route of $155^{\circ}$, respectively. In case of AIS target tracking in the inshore zone behind large topographical obstructions, such as mountain and apartment buildings, the update rate of dynamic information was irregularly changed by the existence of land obstacles. However, the position tracking by AIS information under the situation existing no sea obstructions was achieved in real or near real-time and the instant presentation of course alternations for the ship was correctly monitored by using a PC-based ECDIS. From these results, we concluded that the PC-based ECDIS technology and methodology combined with the AIS information can be easily extended and applied to the surveillance and management for the fishing operation of fishing vessels in the coastal zone and in the EEZ fishing grounds.

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.711-720
• /
• 2009

Characteristics of spectral irradiance based on the distance from the light source, which combined metal halide lamp and high-luminance light-emitting diode (LED) light, were studied to investigate a suitable operating method for fishing lamps of the next generation. A 380-780 nm wavelength radiation was superior when using 1 W electrical power in the order of metal halide lamp, blue LED, white LED, and combined LED lights. The wavelengths at which the irradiance was at a maximum were fixed to 581 nm for the light source, which was combined for each ratio. If the irradiance characteristics at 300-1100 nm wavelengths were set as 100%, the irradiance rates at 400-599 nm were 100%, 72.7%, 88.9%, and 69.5% for the blue, white, combined LED lights, and metal halide lamp, respectively. This indicated that the color rendering of the LED lights was dependent on the metal halide lamp light source. When the horizontal profiles (450-550 nm wavelength) of irradiances were compared to a different type of light source in the ratio white LED: combined LED lights: blue LED: metal halide lamp, the irradiated area of more than $0.01\;{\mu}mol/s/m^2/nm$ was in the ratio 1.0 : 1.3 : 1.7 : 37.3, respectively. Based on the radiation characteristics and irradiance according to the distance from the light source, LED lights have an estimated economic efficiency if used before and after operation of a metal halide lamp.

• 수산해양교육연구
• /
• 제13권2호
• /
• pp.146-167
• /
• 2001

Korea and China are two opposite countries located aside Yellow Sea and co-utilize the East China Sea. The two countries are close together from geological point of view, however, the competitive development of resources was more emphasized than the cooperative development of resources between the two countries because the special policy relationship. Additionally, after the communist government of China was founded in 1949, the political conception between the two countries was quite different. Therefore the establishment of appropriate international fisheries co-operation was impossible, and the international management problems of fisheries resources in Yellow Sea and East China Sea were let alone. UN convention on the Law of the Sea came to force in 1994, Korea and China adopted the exclusive economic zone system in 1996. On the other hand, Fisheries Law in Korea was enacted in 1953 in order to management of fisheries resources, and also China was enacted fisheries law in 1986. The two countries control the fisheries effort through fisheries license system, meanwhile through prohibition fishing area, prohibition fishing period, limitation of net size, and limitation of body length to conserve and manage the fisheries resource. The serious management methods of resource management in the two countries are similar such as the creation of promptly decreased species and those species that have commercial value, discharge of fish seedling stock, settlement of artificial reef and clean of fishing ground. Therefore, the two countries should consider not only the improvement of formal law system, but also how to recover the fisheries resources in circumference water zone and how to improve the efficiency of fisheries resource management. Specially the settlement and management of artificial reef should be chosen in the area that have the highest benefit to two countries, and should establish the common management system of discharge of fish seedling stock. And the two countries should adopt the same criteria through technical management and limitation of net size, limitation of body length, and prohibition area of special fisheries to ensure the highest fisheries benefit of fisherman in the two countries and the highest efficiency of fisheries resource management.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.282-294
• /
• 2004

아르헨티나 짧은지느러미오징어는 1993년에 99,000톤에서 1994년 56,600톤으로 감소하고 1996년에는 78,600톤에서 1997년 130,300톤으로 다시 증가하였다. 어획량의 급감 및 급증한 1993~1994년과 1996~1997년의 성어기인 3~5월의 풍도 원인을 구명하기 위하여 아르헨티나 짧은지느러미오징어의 수온 변동에 따른 풍도 변화를 분석하였다. 호황을 보였던 해인 1993년과 1997년은 성어기에 주로 50$^{\circ}$~51$^{\circ}$S간 해역에서 주어장이 형성되었고, 불황을 보였던 1994년과 1996년에는 50$^{\circ}$S이북에서 성어기 어장이 형성되었으며 포클랜드 어장의 평균수온은 3월 10~11$^{\circ}$C, 4~5월은 9$^{\circ}$C로 평균 등온선이 형성되는 위치에 따라 어황이 변동하는 것으로 나타났다. 아르헨티나 짧은지느러미오징어의 높은 단위노력 당어획량(kg/line) 및 어획량은 어장이 포클랜드 해류의 영향을 받지 않은 1993년 및 1997년은 호황을 보였고, 북상하는 포클랜드 해류의 영향을 받은 1994년 및 1996년에는 급격히 감소되어 불황을 보였다.

• 수산해양기술연구
• /
• 제23권4호
• /
• pp.157-162
• /
• 1987

장어통발의 P.P깔때기 살과 대나무 깔때기 살의 탄성을 측정하고 측면 구멍을 막은 통발과 원형의 유수저항, 침강시간 및 미끼의 냄새확산 등을 관찰한 다음 해상어획 시험을 행한 결과는 다음과 같다. 1. P.P 깔때기 살의 탄성은 대나무 살보다 훨씬 작고, 하중이 증가할수록 탄성회복도는 감소하였다. 2. 플라스틱 장어통발의 유수저항 R(kg)는 유속 V(m/sec)에 따라 다음 관계식으로 나타낼 수 있다. R=0.36V 상(2.01) 3. 장어통발의 침강시간은 측면 구멍을 막은 경우 수면상에서의 완전 침수까지 1~2초 정도 원형보다 지연되나 그 후의 침강속도는 거의 차이가 없었다. 4. 통발 내의 미끼 수용액은 측면 구멍을 많이 막을수록 원형보다 입구쪽으로 집중되어 확산되었다. 5. 측면 구멍을 일부 막은 통발과 원형을 가지고 어획시험을 한 결과 통발당 평균 어획미수나 평균어획량의 어획성능에 있어서 뻘로 된 어장에서는 차이가 없는 것 같다.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.199-206
• /
• 2005

As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time ($Ht_3$) and angle between axises of drum centers ($A_g$) $Ht_3$ : ($7.15Hs^{-0.81}$) $A_g^{-0.81}$, when drum was 5 step there was following formula.$Ht_5$ : ($6.45Hs^{-0.75}$) $A_g0.10$, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was $T=0.08A_8^3-1.60A_g^3-0.49A_g+369.56(r=0.99)$, when drum was 5 step, tension was, $T=-0.01A_g^3+1.96A_g^2-34.05A_g+414.58$ (r-0.99), here, T was tension(g).

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.420-427
• /
• 2016

The marine equipment companies expanding facility investment in accordance with the booming economy are suffering from the reduced demand and the growth of chinese businesses. In this regard, the risk of overinvestment and the importance of prudent equipment investment must be reconsidered. Thus, in this study we performed a productivity and economical efficiency analysis in order to evaluate the investment value on production facilities in a company under the present conditions. The freezer of a fishing vessel manufactured by N company is selected as the subject of our study, while the assembly and welding cooling plates are configured as the scope of automation. Analysis on productivity and economical efficiency was conducted through CYCLONE (Cyclic Operation Network) simulation and economic analysis methods after analyzing the production process of freezer. The proposed analytical technique can be used to support the investment decision in production automation equipment of fishing vessels freezer.