• 한국유체기계학회 논문집
• /
• 제16권2호
• /
• pp.5-9
• /
• 2013

The aim of present study is to evaluate the stability of GM(Metacentric Height) calculation and investigate the damping effect of free rolling test. Moreover, GZ(Righting arm in stability) curve shows that it can provide reasonable design conditions for Fish boat. The roll damping characteristics of the improved model for an 7.9 ton class fishing boat are investigated through the free roll test in towing tank. The safety and boarding sensitivity are evaluated by GM calculation and roll motion period. Therefore, the results in this paper describe that the effect for improved hull is more improved than the original hull.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.757-762
• /
• 2010

Korean fishing boats have had appropriate hull forms for the safety, stability and convenience of fishing ability. However, Korean fishermen are recently concerned about the resistance performance and speed of Korean fishing boats, because the prices of fuel oil are gradually risen, also the exhausting of fish resources and the demand of high speed fishing boats are increased. Therefore, the necessity of the study on the improvement of resistance performance for Korean small coastal fishing boats is gradually increased. This study compares the hull form characteristics of Korean fishing boats with those of Japanese fishing boats, and the hull form of a representative Korean fishing boat is modified. From the modification of the hull form parameters for the Korean fishing boat, the improvement of resistance performances is evaluated. Moreover, the increase of resistance performances is also achieved from the modification of local characteristics for the hull form of the Korean fishing boat. A computational method and ship model tests in towing tank are used for the conformations of the improvement of resistance performance.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• 한국해양공학회지
• /
• 제25권6호
• /
• pp.17-22
• /
• 2011

This study conducted wide-tank experiments and numerical calculations for a vessel in various positions such as upright and inclined by 2 and 4 degrees, with the goal of investigating the motion amplitude response of a small damaged fishing boat subject to a beam sea. Numerical calculations were conducted based on the three-dimensional source distribution method. The good agreement of the numerical calculation and experimental results confirmed that the present calculation method can be efficiently used for the initial design of a small fishing boat. In addition, while the chine-line type has been frequently adopted to improve a ship's resistance performance in the design of a small fishing boat, it is considered that the possibility of a deterioration in rolling performance should be thoroughly considered.

• 어선
• /
• 제43권
• /
• pp.31-37
• /
• 1990

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.677-683
• /
• 2008

The electric propulsion system us closely related with the economical efficiency of ship operation. Fuel efficiency is mainly decided by propulsion system such as diesel engine, propulsion motor and steam turbine. The hybrid propulsion system for fishing boat consists of diesel engine and battery as propulsion power source. This paper is to design battery capacity according to power consumption with ship operation condition, and to test the power consumption of model ship in the circulating water channel. As a result. it can be known that the optimum ship operation condition affects the fuel efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권7호
• /
• pp.574-579
• /
• 2016

기존의 연구에서 저항 성능을 정도 높게 추정하던 격자 시스템은 모형선의 길이 6-8m, 동적 트림 ${\pm}1^{\circ}$ 이하인 일반 대형 상선에 최적화되어 있다. 이러한 격자 시스템을 소형 어선과 같이 프루드 수 0.3~0.8, 동적 트림이 ${\pm}3^{\circ}$ 이상인 대상선에 적용할 경우 수치적 불안정성을 야기한다. 본 연구에서는 이러한 문제를 해결하기 위해 부심으로부터 입구 경계 조건의 길이를 줄이고, 자유수면의 각도에 따라 밀집된 격자 형태를 갖는 격자 시스템을 구성하였다. 상기 격자 시스템을 이용하여 설계 흘수와 밸러스트 흘수에서 다양한 선속에 대해 어선에 작용하는 저항을 수치 해석으로 계산하였으며, ITTC-1978 2차원 해석법을 이용하여 소형 어선의 유효마력을 추정하였다. 준추진효율 계수는 기존의 모형시험 자료를 활용하였으며, 설계 흘수에서 제동마력 추정을 통해 속도 성능을 평가하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.682-685
• /
• 2021

해양수산부가 추진하고 있는 전자 어구 실명제를 위한 어구 자동식별 모니터링 시스템의 선박에 설치되는 IoT 통신 모듈의 서비스 확장성을 제고하기 위하여 3GPP Release13 표준화 기술인 LTE Cat. M1 모듈의 설계와 제작에 대해 기술한다.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.391-399
• /
• 2012

This paper presents a method of hull form design for the assistant vessel which is used both as a lighting boat and a fish carrying boat for the fleet of newly formated purse seiner vessels. The optimum hull form parameters are searched by the Sequential Quadratic Programing(SQP) method with the power estimation method of Van Oortmerssen. The prismatic curve is redesigned from that of the reference hull by the Lackenby method. Through the modification of the hull form by using a CAD system, the design procedure is completed. The resistance performances of the reference and the modified hull forms are estimated by using a numerical simulation method. Also, the estimation of seakeeping ability and stability for the modified hull forms are carried out. And then, an optimum hull form is proposed for the designed hull form. Ship model tests for the reference and the designed hull forms are carried out at ship model basin. The results of the experiments show that the effective horse power of the designed hull form is about 22% smaller than that of the reference hull form at design speed. The designed hull form proposed in this study will contribute to the development of the hull form for Korean large purse seiner vessels.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.504-511
• /
• 2006

In this paper a modern sailing boat for our costal area was developed by using the traditional boat hull form. Main particulars of design ship were determined by using the statistical values. Hull form was varied from the traditional boat hull form which was selected by the previous study and modified to fit Lateen sail. The appendage, rudder and keel were designed for good performance of against wind sailing. The performance of hull form was examined and the results were shown.