• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.278-285
• /
• 2005

This paper describes techniques of camera calibration and artificial landmarks detection for the automatic charging of a mobile robot, equipped with a fish-eye camera in the direction of its operation for movement or surveillance purposes. For its identification from the surrounding environments, three landmarks employed with infrared LEDs, were installed at the charging station. When the robot reaches a certain point, a signal is sent to the LEDs for activation, which allows the robot to easily detect the landmarks using its vision camera. To eliminate the effects of the outside light interference during the process, a difference image was generated by comparing the two images taken when the LEDs are on and off respectively. A fish-eye lens was used for the vision camera of the robot but the wide-angle lens resulted in a significant image distortion. The radial lens distortion was corrected after linear perspective projection transformation based on the pin-hole model. In the experiment, the designed system showed sensing accuracy of ${\pm}10$ mm in position and ${\pm}1^{\circ}$ in orientation at the distance of 550 mm.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.23-31
• /
• 2010

Due to the fact that fisheye lens can provide super wide angles with the minimum number of cameras, field-of-view over 180 degrees, many vehicles are attempting to mount the camera system. Not only use the camera as a viewing system, but also as a camera sensor, camera calibration should be preceded, and geometrical correction on the radial distortion is needed to provide the images for the driver's assistance. In this thesis, we introduce a geometric correction technique to minimize the loss of the image data from a vehicle fish-eye lens having a field of view over $180^{\circ}$, and a asymmetric distortion. Geometric correction is a process in which a camera model with a distortion model is established, and then a corrected view is generated after camera parameters are calculated through a calibration process. First, the FOV model to imitate a asymmetric distortion configuration is used as the distortion model. Then, we need to unify the axis ratio because a horizontal view of the vehicle fish-eye lens is asymmetrically wide for the driver, and estimate the parameters by applying a non-linear optimization algorithm. Finally, we create a corrected view by a backward mapping, and provide a function to optimize the ratio for the horizontal and vertical axes. This minimizes image data loss and improves the visual perception when the input image is undistorted through a perspective projection.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.2
• /
• pp.177-182
• /
• 2015

General method for correcting the distortion caused by the characteristic of the fish-eye lens may be classified in two ways. The first method is a calibration method using a mathematical model taking into account the characteristics of the lens, the second method is a method using only the distortion correction image, regardless of the lens. When considering the characteristics of the lens, calibration equation can be calculated geometrically from the relationship between the three-dimensional real-world coordinates and two-dimensional image coordinates and the parameters of lens. However, it is not suitable for ellipsoid type lens, because of existing research papers have been corrected on the spherical-type fisheye lens. In this paper, we propose a method for correcting geometrically using fish-eye lens as an ellipsoid model. Through a calibration picture, it can be seen that the proposed method is valid.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2428-2430
• /
• 2001

일반적인 카메라의 시야는 사람에 비하여 매우 좁기 때문에 큰 물체를 한 화면으로 얻기 힘들며, 그 움직임도 넓게 감시하기 어려움 점이 많다. 이에 본 논문에서는 어안 렌즈(Fish-Eye Lens)를 사용하여 넓은 시야의 영상을 획득하여 perspective 영상과 panorama 영상을 실시간 복원하는 파노라마 시스템을 구현하였다. 또한 어안 렌즈의 특성으로 인한 영상 변환과정에서 발생되는 해상도 차이를 보완하기 위하여 여러 가지 interpolation 방법을 적용하여 이의 결과를 비교하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.868-874
• /
• 2014

This paper proposes a novel mapping algorithm in Omni-directional Vision SLAM based on an obstacle's feature extraction using Lucas-Kanade Optical Flow motion detection and images obtained through fish-eye lenses mounted on robots. Omni-directional image sensors have distortion problems because they use a fish-eye lens or mirror, but it is possible in real time image processing for mobile robots because it measured all information around the robot at one time. In previous Omni-Directional Vision SLAM research, feature points in corrected fisheye images were used but the proposed algorithm corrected only the feature point of the obstacle. We obtained faster processing than previous systems through this process. The core of the proposed algorithm may be summarized as follows: First, we capture instantaneous $360^{\circ}$ panoramic images around a robot through fish-eye lenses which are mounted in the bottom direction. Second, we remove the feature points of the floor surface using a histogram filter, and label the candidates of the obstacle extracted. Third, we estimate the location of obstacles based on motion vectors using LKOF. Finally, it estimates the robot position using an Extended Kalman Filter based on the obstacle position obtained by LKOF and creates a map. We will confirm the reliability of the mapping algorithm using motion estimation based on fisheye images through the comparison between maps obtained using the proposed algorithm and real maps.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06c
• /
• pp.468-471
• /
• 2008

이 논문은 응급상황을 인식하기 위하여 어안렌즈를 통해 획득된 영상을 이용하여 기절 동작을 인식하는 방법을 제안한다. 거실의 천장 중앙에 위치한 어안렌즈(fish-eye lens)를 장착한 카메라로부터 화각이 170인 RGB 컬러 모델의 어안 영상을 입력 받은 뒤, 가우시안 혼합 모델 기반의 적응적 배경 모델링 방법을 이용하여 동적으로 배경 영상을 갱신한다. 입력 영상의 평균 밝기를 구하고 평균 밝기가 급격하게 변화하지 않도록 영상 픽셀을 보정한 뒤, 입력 영상과 배경 영상과 차이가 큰 픽셀을 찾음으로써 움직이는 객체를 추출하였다. 그리고 연결되어 있는 전경 픽셀 영역들의 외곽점들을 추적하여 타원으로 매핑하고 움직이는 객체 영역의 형태를 단순화하였다. 이 타원을 추적하면서 어안 렌즈 영상을 투시 영상으로 변환한 다음 타원의 크기 변화, 위치 변화, 이동 속도 정보를 추출하여 이동과 정지 및 움직임이 기절동작과 유사한지를 판단하도록 하였다. 본 논문에서는 실험자로 하여금 기절동작, 걷기 동작, 앉기 동작 등 여러 동작을 취하게 하고 기절 동작 인식을 실험하였다. 실험 결과 어안 렌즈 영상을 그대로 사용하는 것보다 투시 영상으로 변환하여 타원의 크기변화, 위치변화, 이동속도 정보를 이용하는 것이 높은 인식률을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.829-832
• /
• 2004

실제영상으로 가상환경을 구축해서 사용자가 가상환경을 돌아다님으로써 보다 큰 몰입감과 현실감을 제공하는 영상기반 가상현실 기술은 최근 들어 웹 기반 가상현실시스템을 구축하기 위해서 많이 사용된다. 이 기술은 가상환경 구축에 있어 항해를 쉽게 하기 위한 한 방법으로 넓은 시각 영역(field of view)을 얻을 수 있는 wide-angle 렌즈를 흔히 사용한다. 어안렌즈(fish-eye lens)는 전형적인 넓은 시각 영역을 가진 렌즈로서, 매우 큰 radial distortion 을 가진다. 왜곡을 없앤 영상을 얻기 위해 본 논문에서는 구면기하(spherical geometry) 및 사영기하(projective geometry)를 사용하여 어안영상을 보정하는 non-metric기법을 제안한다. 제안한 이 방법은, 기존의 방법들 보다는 쉽고 빠른 속도로 왜곡을 보정할 수 있으므로 어안영상의 왜곡을 보정하는 하드웨어를 효율적으로 구현할 수 있다. 그리고 spheroid 를 이용해 좀 더 왜곡을 정확히 보정방법과 별도의 서보 모터 없이 pan/title 를 가능케 하는 시점이동에 따른 왜곡 보정 방법을 제시한다.

• Journal of Aquaculture
• /
• v.13 no.1
• /
• pp.9-12
• /
• 2000

A species of the parasitic copepods Phrixcephalus unbellatus (Lernaeide ; Cyclopoidea) from Branchiostegus japonicus is described and reported for the first time in Korea. The parasite was recovered from the eye of host. P. umbellatus was easily identified by the body shape extensive ramification of the antennal processes and numerous branches on the thoracic horns, The parasite inserted its head and the anterior portion of thorax up to the 4th segment in the eye ball of the host through a narrow hole which it usually burrowed near the upper margin of the cornea above the crystalline lens. Prevaklence of the parasite increased from 3.3% January to 11.9% in June.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.70-77
• /
• 2014

This paper proposes a novel localization algorithm based on ego-motion which used Lucas-Kanade Optical Flow and warping image obtained through fish-eye lenses mounted on the robots. The omnidirectional image sensor is a desirable sensor for real-time view-based recognition of a robot because the all information around the robot can be obtained simultaneously. The preprocessing (distortion correction, image merge, etc.) of the omnidirectional image which obtained by camera using reflect in mirror or by connection of multiple camera images is essential because it is difficult to obtain information from the original image. The core of the proposed algorithm may be summarized as follows: First, we capture instantaneous $360^{\circ}$ panoramic images around a robot through fish-eye lenses which are mounted in the bottom direction. Second, we extract motion vectors using Lucas-Kanade Optical Flow in preprocessed image. Third, we estimate the robot position and angle using ego-motion method which used direction of vector and vanishing point obtained by RANSAC. We confirmed the reliability of localization algorithm using ego-motion based on fisheye warping image through comparison between results (position and angle) of the experiment obtained using the proposed algorithm and results of the experiment measured from Global Vision Localization System.

• Journal of Multimedia Information System
• /
• v.6 no.1
• /
• pp.23-30
• /
• 2019

A communications profile is a system that acquires information from communication links to an ambulance or other vehicle moving on a road and compiles a database based on this information. The equipment (six sets of HDTVs, fish-eye camera, satellite antenna with tracking system, and receiving power from the satellite beacon of the N-star) mounted on the roof of the vehicle, image data were obtained at Yokohama Japan. From these data, the polygon of the building was actually produced and has arranged on the map of the Geographical Survey Institute of a 50 m-mesh. The optical study (relationship between visibility rate and elevation angle) were performed on actual data taken by fish-eye lens, and simulated data by 3D-Map with polygons. There was no big difference. This 3D map system then predicts the communication links that will be available at a given location. For line-of-sight communication, optical analysis allows approximation if the frequency is sufficiently high. For non-line-of-sight communication, previously obtained electric power data can be used as reference information for approximation in certain cases when combined with predicted values calculated based on a 3D map. 3D maps are more effective than 2D maps for landing emergency medical helicopters on public roadways in the event of a disaster. Using advanced imaging technologies, we have produced a semi-automatic creation of a high-precision 3D map at Yokohama Yamashita Park and vicinity and assessed its effectiveness on telecommunications and ambulatory merits.