• 한국안광학회지
• /
• 제7권2호
• /
• pp.79-87
• /
• 2002

한국의료용구공업협동조합 산업 현황 자료 및 관세청 수출입 현황자료를 분석하여 국내 콘택트렌즈의 시장 현황을 조사하였다. 2001년도 국내 콘택트렌즈 착용자는 약 240만 명으로 추정되며, 총 국내 콘택트렌즈 시장규모(생산원가 기준)는 252억 원으로 조사되었다. 최근 콘택트렌즈 시장현황은 하드콘택트렌즈와 일반 콘택트렌즈의 시장규모는 감소하는 반면, 사용이 편리한 일회용 콘택트렌즈와 미용 칼라렌즈의 시장 점유율이 증가하였다. 우리나라 콘택트렌즈 수출은 매년 증가하고 있는 추세로 1997년 609천 달러에서 2001년 8,985천 달러로 47.5% 증가하였고, 수입은 1997년 11,976천 달러에서 2001년 16,026천 달러로 33.8% 증가하여 2001년 기준 수출보다 수입이 1.7배 정도 많은 것으로 나타났다. 따라서 이를 해소하기 위해서는 원자재의 국산화, 적극적인 광고 및 마케팅 전략의 수립, 제품의 다양화 등이 필요하리라 생각된다.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.191-195
• /
• 2022

We investigate the lateral far-field pattern characteristics, including divergence angle change and far-field pattern analysis as output power increases, of narrow-emitter-width 850 nm GaAs/AlGaAs laser diodes (LDs). Each LD has a cavity of 1200 and 1500 ㎛ and narrow emitter width of 2.4 ㎛ for the top and 4.6 ㎛ for the bottom. The threshold currents are 35 and 40 mA, and L-I kinks appear at power levels of 326 and 403 mW, respectively. The divergence angle tends to increase due to the occurrence of first-order lateral mode and the thermal lensing effect. But with the L-I kink, the divergence angle decreases and the far-field pattern becomes asymmetric. This is due to coherent superposition between the fundamental and the first-order lateral mode. We provide detailed explanations for these observations based on high-power laser diode simulation results.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.25.3-25.3
• /
• 2010

Our previous study used a bar-type reference mirror to measure the relative distance to the target surface. The target measurement accuracy was required to $1{\mu}m$ PV for aspheric optical surface up to 1m in diameter. Earlier system suffers from the reference surface deformation when the measuring part moves. In order to reduce the deformation, measuring part and the reference part separated from each order in the new design. This system utilizes a kinematic support assembly using invar flexure to minimize the reference surface deformation under gravity and vibration. The surface deformation requirement of reference mirror is defined as of $0.2{\mu}m$ under gravity and 40Hz vibration. The finite element results, shows reference mirror deformation of $0.164{\mu}m$. The first resonance mode was computed to analysis 46.05Hz for reference part and 43.44Hz for measuring part. Thesis satisfies the frequency requirement.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.273-282
• /
• 2023

This paper presents a new method for redistributing effectively the first orders of each lens element to achromatize and athermalize an optical system, by introducing a novel method for adjusting the slope of an achromatic and athermal line. This line is specified by connecting the housing, equivalent single lens, and aberration-corrected point on a glass map composed of available plastic and glass materials for molding. Thus, if a specific lens is replaced with the material characterized by the chromatic and thermal powers of an aberration-corrected point, we obtain an achromatic and athermal system. First, we identify two materials that yield the minimum and maximum slopes of the line from a housing coordinate, which specifies the slope range of the line spanning the available materials on a glass map. Next, redistributing the optical first orders (optical powers and paraxial ray heights) of lens elements by moving the achromatic and athermal line into the available slope range of materials yields a good achromatic and athermal design. Applying this concept to design a mobile-phone camera lens, we efficiently obtain an achromatic and athermal system with cost-effective material selection, over the specified temperature and waveband ranges.

• 한국광학회지
• /
• 제8권2호
• /
• pp.81-87
• /
• 1997

본 논문은 4군구성의 비디오 카메라용 줌광학계에 대해 렌즈모듈의 개념을 이용하여 1차량 및 3차 수차를 고려한 최적의 초기설계와 이로부터 설계 줌광학계를 설계하는 방법을 제안하였다. 최적화 과정을 통해 각각의 렌즈모듈에 적절히 1차량과 3차 수차량을 설정함으로써 줌비 10배(f'=6.1693~58.4065)를 갖고, 최적설계에 필요한 구속조건을 만족시키는 초기설계 줌광학계를 얻었다. 적절히 선정된 각각의 렌즈군의 촛점거리가 렌즈모듈의 촛점거리와 같도록 scaling 한 후, 군사이의 공기간격을 조정하므로써 줌궤적을 일치시켰다. 이러한 과정을 통해 독립적으로 설계된 군들을 결합시켜 얻은 줌광학계는 렌즈모듈로 구성된 원래의 초기설계된 줌광학계와 동일한 1차특성을 갖는다. 결과적으로 잔여수차 보정을 통해 후군촛점조절방식을 이용하는 비디오 카메라 줌렌즈로서 유용한 줌광학계를 얻을 수 있었다.

• 한국광학회지
• /
• 제16권5호
• /
• pp.423-427
• /
• 2005

본 연구는, 원리적인 다양한 장점에도 불구하고 현실적인 제약으로 인해 실제 설계과정에서 잘 적용되지 않는, 자이델 3차 수차를 간편하게 다룰 수 있는 방안을 제안한다. 먼저 유한 물체거리를 갖는 2 반사경계에 대해 자이델 3차의 구면수차계수를 유도한다. 여기서, 유도된 구면수차계수는 고차의 비선형 방정식으로 표현되는데, 그 구성은 설계변수(물체거리, 주경 및 부경의 곡률, 주경과 부경 사이의 거리)와 유효초점거리로 이루어진다. 해석적으로 표현된 고차의 비선형 구면수차 방정식은 컴퓨터를 이용한 수치기법에 의해 근사적인 제로조건을 만족하도록 풀려진다. 이렇게 구해진 다양한 수치 해들을 주의 깊게 통찰하면 주경과 부경의 곡률 간에 선형성이 존재함을 파악할 수 있다. 즉, 결과적으로 주경과 부경의 곡률들을 선형맞춤(linear fitting)하면 곡률선형방정식이 얻어지는데, 이의 의미는 약간의 대수적인 계산으로 최적화의 초기 입력 데이터를 손쉽게 얻을 수 있는 가능성을 제시한 것이다. 한편, 응용외의 순수 수차론적인 관점에서 본다면, 본 연구의 특징은 유한 물체거리를 갖는 2 반사경계의 주경 및 부경의 곡률들이 구면수차가 거의 제로가 되는 조건 하에서 상호간에 선형 관계가 존재하였다는 것이다.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.44-50
• /
• 2022

An off-axis zone plate is able to focus on a single order while neglecting the zeroth order in a visible imaging system. This allows one to enhance the contrast quality in diffractive images, which is the major advantage of this type of zone plate. However, most previous reflection zone plates are used in focusing X-rays with a small grazing incident angle and are intricately designed with the use of a local grating period. In this study, we suggest the design of an off-axis elliptical zone plate (EZP) that is used to focus a monochromatic light beam with separation between the first and unfocused orders under a large grazing incident angle of 45°. An assumption using the total grating period, which depends on the average and constant grating period, is proposed to calculate the desired distance between the first and zeroth order and to simplify the construction of a novel model off-center EZP. Four diffractive optical elements (DOEs) with different parameters were subsequently fabricated by direct laser lithography and then verified using a performance evaluation system to compare the results from the assumption with the experimental results.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.127-135
• /
• 2023

Radially polarized beams with the ability to generate a sub-wavelength sized spot in a longitudinal field provides significant applications in microscopic imaging, optical tweezers, lithography and so on. However, this excellent property can also be achieved based on conventional circularly polarized beams. Here, we demonstrate its ability to create a strong longitudinal field by comparing the tight focusing characteristics of fractional-order vortex modulated radial polarized and left-handed circular polarized Bessel-Gauss beams. Additionally, the possibility of generating arbitrary fractional-order vortex modulated Bessel-Gauss beams with a strong longitudinal field is demonstrated. A special modulation method of left-handed circularly polarized Bessel-Gauss beams modulated by a fractional-order vortex is adopted creatively and a series of regulation laws are obtained. Specifically, the fractional-order phase modulation parameter n can accurately control the number of optical lobes. The ratio of the pupil radius to the incident beam waist β₁ can control the radius of the optical lobes. The first-order Bessel function amplitude modulation parameter β₂ can control the number of layers of optical lobes. This work not only adds a new modulation method for optical micromanipulation and optical communication, but also enriches the research on fractional vortex beams which has very important academic significance.

• ALGAE
• /
• 제19권3호
• /
• pp.201-205
• /
• 2004

An ectoparasitic din flagellate infesting plank tonic chaetognath, Sagitta crassa Tokioka was found, for the first time, from Korean coasts. In order to identify the species, we investigated detailed morphology of the din flagellate using Nomarski interference optics as well as epifluorescent microscopes. The parasitic din flagellate consists of an oval to rod-shaped cell with a peduncle, by which the organism attaches to the host. The cell is covered with polygonal thecal plates. The nucleus displays two different shapes according to cell cycle stages: in young trophont the nucleus is elongated and shows typical din flagellate nucleus (dinokaryon), while in matured trophont, the nucleus is dome-shaped and non-dinokaryotic. The peduncle is variable in length and is ornamented with the longitudinal striations. All these characteristics point to identity that the ectoparasitic din flagellate infecting Sagitta crassa in Korean coasts is Oodinium inlandicum Horiguchi et Ohtsuka, originally described from the Seto Inland Sea of Japan. Relationship between prevalence and host sizes differed from those in Japan.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.104-113
• /
• 2022

We present a method to count the overall length of the zoom system in an initial design stage. In a zoom-lens design using the concept of the group, it has been very hard to precisely estimate the overall length at all zoom positions through the previous paraxial studies. To solve this difficulty, we introduce T_eq as a measure of the total track length in an equivalent zoom system, which can be found from the first order parameters obtained by solving the zoom equations. Among many solutions, the parameters that provide the smallest T_eq are selected to construct a compact initial zoom system. Also, to obtain an 8× four-group zoom system without moving groups, tunable polymer lenses (TPLs) have been introduced as a variator and a compensator. The final designed zoom lens has a short overall length of 29.99 mm, even over a wide focal-length range of 4-31 mm, and an f-number of F/3.5 at wide to F/4.5 at tele position, respectively.