• Korean Institute of Interior Design Journal
• /
• v.23 no.2
• /
• pp.147-155
• /
• 2014

The purpose of this study was to investigate expression characteristics of korean traditionality in restaurants & Ccfes which adapted thatched roof & shingle-roofed house. As a method of this study, a case study was made to investigate for exterior and interior elements(roof type, facade, floor, wall, ceiling, door & window) of 12 restaurants & cafes in Seoul and Kyunggi Province from June 10, 2013 to December 1, 2013. The results of this study were as follows: First, traditional transformation was mostly used among the traditional expression methods. But, there was not many traditional reinterpretation method. Second, looking at each component, traditional reproduction method mostly used for roof, column and ceiling to emphasize facade. Traditional transformation method can be divided into 3 ways in detail. The first method is mixing materials of modern and traditional, and the second one is transforming traditional material and combining this with modern one. The third is removing traditional material completely and transforming totally into modern materials. Third, traditional high quality noble houses are found in luxurious Korean restaurants and luxurious cafes while common houses are found in local food restaurant and cafes. It is because traditional common houses are still considered as low quality of design and it may prevent common houses from becoming high quality of design.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2019

This study was conducted to analyze the conservation status by diagnostical methology for the front wall of Jungjeongdang area of Dodong-Seowon. The study was carried out as photogrammetry and mapping - investigation of materials and conservation status - analysis and evaluation of conservation status. The results are as follows. First, in the case of photogrammetry, each photograph was took in superposition, and the distortions of the photographs were corrected and synthesized. Based on this, actual survey drawings of the wall were prepared. Second, in case of material and conservation status, the wall is in the form of Wapyeondam and the material of the head part are tile, mud and lime, and the material of the body part are mud and tile. The mud was mixed with gravel, sand and straw. At the base part, amorphous natural stones and mud were used. The remarkable damage that appears on the wall is erosion of the base part, and some disintegration appears in the body part. There is a biological patina on the head and the base, and vegetation such as lichen is concentrated on the partial body. There was superficial deposit in the head part, and some tiles were broken or lost. Deep fissures are intensively located in some part of the eastern wall. Third, in the case of analysis and evaluation of the conservation status, it is considered that by the erosion of the foundation part and the disintegration of the body part, there is a possibility that physical damage will continue to be applied to the wall, so immediate action is necessary. The distribution of biological patina and vegetation does not appear to cause great problems in the wall, but it is necessary to reduce it in view of aesthetic problems. A cracked or missing tile would need to be replaced, and deep cracks in the eastern wall appear to have been caused by subsidence, and reinforcement of the underground is necessary to prevent further damage.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.14-23
• /
• 1987

This study was carried out to investigate the anatomical characteristics, the radial and axial variation of the cell dimension and bulk density for four bamboo species used as the major material of bamboo products in Korea; Phyllostachys(P.bambusoides, P.edulis, P.nigra var.henonis, and Pnigra). The results obtained were summarized as follows; 1) In the outer part of culm, the mophological difference of cell diameter and distribution were not acknowledged. However, gum-like substance was occurred In the epidermis, hypodermis, cortex and metaxylem vessel of P.nigra, while it was occured only in the metaxylem vessel of P.edulis. 2) The protoxylem vessel in the central zone of culm-wall could be in the two types; the first type consisted of 4-5 small cell pieces occurred in P.edulis and P.nigra var. henonis, the second type of 1-2 large cell pieces in P.bambusoides and P.nigra. And transition of cell diameter from the vascular bundle sheath to the ground tissue was gradually enlarged in P.nigra and P.edulis but abruptly in P.bambusoides and P.nigra var. henonis. 3) Thin-wall tyloses were well developed in the outer and central zone of culm-wall in four species. 4) Compared with the central part of culm-wall, the number of parenchyma cells and the amount of the vascular bundle sheaths per unit area were a few in the inner part. The inner part nearest to the pith cavity was consisted of thick-well parenchyma cell. 5) The dimensional variations of metaxylem vessel and parenchyma cell in the radial direction were decreased from the inner part to the epidermis in all species observed. 6) The fiber length was the maximum in the central zone and its diameter was increased from the inner part to the outer part. In the axial variation. fiber length was slightly increased from the base and then decresed slowly toward the top, and its diameter was reverse. 7) The axial variation of the bulk density was continuously increased from the base toward the top and its radial variation was rapidly increased from the inner part to the epidermis.

• KIEAE Journal
• /
• v.8 no.4
• /
• pp.63-69
• /
• 2008

The thesis is a comparative analysis of Infill Technologies between Korea's long-life Mock-up House, a study driven by 'Durability and Flexibility of Long-life Housing Technology Development' of R&D, and Japan's KSI experimental house, the major example of Japan's long-llfe housing. In terms of the domestic Mock-up House, a system of building the floor first was applied. The floor material of each housing unit required a development of dry heating component that is partially substitutable in order to avoid conflict with the finishing. Also, a development of a floor system that can counteract against the construction inaccuracy was required. In the Case of an outer wall, need to make the wall with the chassis. In the case of ceiling, need to develop the double ceiling system which is good for sound insulation. Also, in comparison to KSI experimental house in Japan, it would require to develop a wiring system of the ceiling which can react to the movement of the wall. Especially, to assure the flexible nature of an internal wall, it would desperately require the research and development of the products related to components and flexible system of mechanical/electrical/communication parts as well as supporting institutionalized system for this development. Furthermore, for KSI experimental house in Japan, it would be necessary to formulate a construction manual as well as a systematic and practical planning guide to invent a new interface rule which will secure simplicity of assembling, dismantling, installation and replacement of architectural components for which research development is quite insignificant at the moment. This effort will have to continue to give a solid direction for better application of such reference manual during construction and development of long life span apartment by public sector as well as private corporations.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.67-70
• /
• 2009

Purpose: Anatomical basis around orbit can be helpful in periorbital surgery, and there are many articles about measurement between periorbital reference points. In 1967, Jones and Evans measured the orbital wall thickness of Asian cadavers and this article has been cited more than 50 times. But there is no research in orbital thickness in Vivo. Author's idea was based on difference between live human and human cadaver. Material & Method: We conducted this study from 63 consecutive blow out fracture patients between January, 2000 to june, 2005 by collecting the bone fragments and measured the thickness of that fragment using vernia calipers. Anatomically, orbital floor is separated two area by inferior orbital fissure and we measured each area. Three areas were zone I (medial wall), zone II (medial to inferior orbital fissure) and zone III (lateral to inferior orbital fissure). Result: When the overall results were considered, the thickness of Zone I (medial wall of orbit) was average $0.131{\pm}0.006mm$ in male and $0.129{\pm}0.007mm$ in female and Zone II (medial side of orbital floor) was $0.251{\pm}0.005mm$ in male and $0.245{\pm}0.006mm$ in female, Zone III (lateral side of orbital floor) was $0.237{\pm}0.006mm$ in male and $0.226{\pm}0.006mm$ in female. There were no statistical difference between orbital wall thickness of male and female. Also, orbital wall thickness of adults measured $0.130{\pm}0.005mm$, $0.250{\pm}0.005mm$, $0.232{\pm}0.006mm$ in Zone I, Zone II, Zone III and $0.128{\pm}0.006mm$, $0.233{\pm}0.005mm$, $0.215{\pm}0.007mm$ in Zone I, Zone II, Zone III from childs, and there were no statistical difference between adult and child. Conclusion: This article is the first study about Korean orbital wall thickness, and can be helpful to periocular surgery.

• Journal of Environmental Health Sciences
• /
• v.32 no.4 s.91
• /
• pp.292-303
• /
• 2006

The Volatile Organic Compounds(VOCs) are emitted from various sources and have lots of different form. Recently human are spending the many times at indoor area and indoor air pollution is issued the important social problem. The emission sources of indoor air pollutants are very various, also indoor building materials are composed of very complex chemical compounds, these indoor building materials discharge very much VOCs and other hazardous compounds. In this study, we performed the small chamber test to investigate the VOCs emission concentration and characteristics involving five kinds of the indoor building materials(furniture material, wooden floor, wall paper, paint and tile) under different conditions of four temperature and relative humidity as account of the air flow rate(AFR), air exchange rate(AER), loading factor and air velocity respectively. As the result, It was showed that building materials are emitted the highest VOCs concentration at the beginning of experiment and furniture material is emitted the highest VOCs concentration. Most of the materials were affected by temperature, but paint and tile material were affected by humidity.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.88-93
• /
• 2001

In this paper, joints of Cu-1Cr-0.1Zr alloy to STS316L were performed by friction welding method. Particularly, Cu-1Cr-0.1Zr alloy is attractive candidate as nuclear power plant material and exibit the best combination of high strength and good electrical and thermal conductivity of any copper alloy examined. The stainless steel is a structural material while copper alloy acts as a heat sink material for the surface heat flux in the first wall. So, in this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of such nuclear reactor component of Cu-1Cr-0.1Zr alloy to STS316L steel sere performed.

• The Journal of the Korean dental association
• /
• v.48 no.1
• /
• pp.45-55
• /
• 2010

Purpose: The aim of this study was to evaluate 1 year cumulative survival rate of implants placed on augmented sinus using Osteon$^{(R)}$, bone graft material and to assess height of the grafted material radiographically. Material and Methods: 10 maxillary sinuses were augmented in 10 patients and 25 implant fixtures were installed simultaneously or after 6 months healing period. The height of the sinus graft material was measured using panoramic images immediately after augmentation and up to 19 months subsequently. Changes in the height of the sinus graft material were calculated with respect to implant length and original sinus wall height. Results: The cumulative survival rate was 100% in all 25 implants. Additionally, normal healing process without any complication was observed in all patients. The mean crown/Implant ratio was 1.25. The mean marginal bone loss was 0.95mm and the mean resorption rate of Osteon$^{(R)}$ was 0.05mm/month. The fastest resorption site of Osteon$^{(R)}$ is the first molar area. The grafted material was well maintained in sinus and decreased slightly over 1 year. Conclusion: In conclusion, It can be suggested that Osteon$^{(R)}$ may have predictable result when it was used as a grafting material for sinus floor augmentation.

• Coupled systems mechanics
• /
• v.10 no.2
• /
• pp.123-142
• /
• 2021

The paper deals with the study of the dispersion of quasi-Lamb waves in a hydro-elastic system consisting of an elastic plate, barotropic compressible inviscid fluid, and rigid wall. The motion of the plate is described using the exact equations of elastodynamics, however, the flow of the fluid using the linearized equations and relations of the Navier-Stokes equations. The corresponding dispersion equation is obtained and this equation is solved numerically, as a result of which the corresponding dispersion curves are constructed. The main attention is focused on the effect of the presence of the fluid and the effect of the fluid layer thickness (i.e., the fluid depth) on the dispersion curves. The influence of the problem parameters on the dispersion curves related to the quasi-Scholte wave is also considered. As a result of the analyses of the numerical results, concrete conclusions are made about the influence of the fluid depth, the rigid wall restriction on the fluid motion, and the material properties of the constituents on the dispersion curves. During the analyses, the zeroth and the first four modes of the propagating waves are considered.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1249-1249
• /
• 2022

The facade, an exterior material of a building, is one of the crucial factors that determine its morphological identity and its functional levels, such as energy performance, earthquake and fire resistance. However, regardless of the type of exterior materials, huge property and human casualties are continuing due to frequent exterior materials dropout accidents. The quality of the building envelope depends on the detailed design and is closely related to the back frames that support the exterior material. Detailed design means the creation of a shop drawing, which is the stage of developing the basic design to a level where construction is possible by specifying the exact necessary details. However, due to chronic problems in the construction industry, such as reducing working hours and the lack of design personnel, detailed design is not being appropriately implemented. Considering these characteristics, it is necessary to develop the detailed design process of exterior materials and works based on the domain-expert knowledge of the construction industry using artificial intelligence (AI). Therefore, this study aims to establish a detailed design automation algorithm for AI-based condition-responsive exterior wall panels and their back frames. The scope of the study is limited to "detailed design" performed based on the working drawings during the exterior work process and "stone panels" among exterior materials. First, working-level data on stone works is collected to analyze the existing detailed design process. After that, design parameters are derived by analyzing factors that affect the design of the building's exterior wall and back frames, such as structure, floor height, wind load, lift limit, and transportation elements. The relational expression between the derived parameters is derived, and it is algorithmized to implement a rule-based AI design. These algorithms can be applied to detailed designs based on 3D BIM to automatically calculate quantity and unit price. The next goal is to derive the iterative elements that occur in the process and implement a robotic process automation (RPA)-based system to link the entire "Detailed design-Quality calculation-Order process." This study is significant because it expands the design automation research, which has been rather limited to basic and implemented design, to the detailed design area at the beginning of the construction execution and increases the productivity by using AI. In addition, it can help fundamentally improve the working environment of the construction industry through the development of direct and applicable technologies to practice.