• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.647-653
• /
• 2007

Rapid crestal bone resorption following maxillary tooth loss is further accentuated in the posterior regions because of pneumatization and enlargement of the maxillary sinuses. A treatment rationale that allows preservation and augmentation of vertical available bone at the time of posterior maxil-lary tooth extraction may offer numerous therapeutic benefits which are more short courses of ther-apy and no needs of additional surgical augmentation. The present study comprised 3 patients who had 4 posterior maxillary teeth with no evident bone between the tooth apex and sinus floor, as estimated through preoperative radiographic analysis. Sinus floor augmentation at the time of tooth extraction was chosen for the ltreatment of these patients. After the tooth was carefully extracted, the empty alveolus was thoroughly debrided and a trephine approach was performed. Particulated autogenous bone was gently pushed beyond the empty alveolus to elevate the sinus membrane using an osteotome. The distance between bone crest and si-nus floor was radiographically estimated 4 months after the first procedure. Another procedure was then carried out to place the implants of 11 mm length without another augmentation procedure. All implant were clinically stable, with no sign of infection. The presented surgical procedure performed at the time of extraction of posterior maxillary teeth in close proximity to the sinus floor allowed placement of implants of proper length.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.28.1-28.6
• /
• 2016

Backgrounds: Insufficient intermaxillary space is caused by non-restoration following tooth extraction in the past, and this involves eruption of the opposing teeth and changes of the arch structure. Such cases are difficult just by a simple prosthetic approach, and diversified treatment plans should be established. Among these, posterior maxillary segmental osteotomy (PMSO) is an efficient treatment option than extraction of opposing teeth as it surgically repositions multiple erupted teeth and alveolar bone. PMSO can preserve the natural teeth; therefore, it is being regarded as a treatment method which can improve insufficient intermaxillary space significantly. Case presentation: In this case report, the first patient received PMSO in order to place an implant in the mandibular edentulous space after decreased vertical dimension is restored, and the second patient received PMSO along with orthodontic treatment to obtain the intermaxillary space and balance the interarch molar width. Conclusion: PMSO is the treatment of choice when occlusion is compromised in the presence of decreased vertical dimension or arch length discrepancy.

• Imaging Science in Dentistry
• /
• v.47 no.1
• /
• pp.63-68
• /
• 2017

Some complications can arise with the usage of local anesthesia for dental procedures, including the fracture of needles in the patient. This is a rare incident, usually caused by the patient's sudden movements during anesthetic block. Its complications are not common, but can include pain, trismus, inflammation in the region, difficulty in swallowing, and migration of the object, which is the least common but has the ability to cause more serious damage to the patient. This report describes a case in which, after the fracture of the anesthetic needle used during alveolar nerve block for exodontia of the left mandibular third molar, the fragment moved significantly in the first 2 months, before stabilizing after the third month of radiographic monitoring.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.85-93
• /
• 2016

PURPOSE. The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-retained overdenture. MATERIALS AND METHODS. Maxillary implant-retained overdentures with 4 implants placed in the anterior region of edentulous maxilla were converted into a 3-D numerical model, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional finite element analysis. RESULTS. In all experimental models, the highest stress was concentrated on the most distal implant and implant supporting bone on loaded side. The stress at the most distal implant-supporting bone was concentrated on the cortical bone. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant and implant supporting bone on loaded side. CONCLUSION. It could be suggested that when making maxillary implant retained overdenture, using Hader bar instead of milled bar and full palatal coverage rather than partial palatal coverage are more beneficial in distributing the stress that is applied on implant supporting bone.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.3
• /
• pp.303-310
• /
• 2014

Objectives : The purpose of the study is to investigate the effects of bite force by gender and physical features. Methods : A self-reported questionnaire was filled out by 212 college students in Chungnam province from October to December, 2013. The questionnaire consisted of oral health condition. The bite force of the first molar teeth was measured. Results : Males showed the greater bite force than females(p<0.001). Those who had temporomandibular joint(TMJ) disorder suffered from mouth opening difficulty and weaker bite force than those who had not(p<0.05). Those who had malocclusion showed weaker bite force (p<0.01). Those who had a habit of chewing gums tended to have greater bite force than those who had not(p<0.05). The bite force was correlated with height(r=0.309), weight(r=0.345), and BMI(r=0.249)(p<0.01). Conclusions : Males showed greater bite force than females. The temporomandibular joint (TMJ) disorder, subjective malocclusion, and eating habit also affected the bite force.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.217-225
• /
• 1994

With the purpose of improving the therapeutic index of $[^3H]$ acyclovir (ACV) in the treatment of chronic hepatitis B infection, asialofetuin (AF) which after selective interaction with Ashwell's receptor specifically enters into hepatocytes, was chosen as a carrier system for hepatic targeting. This drug was first converted to its monophosphate (ACVMP), which was subsequently activated by water soluble carbodiimide to conjugate with ${\varepsilon}-NH_2$ groups of Iysine residues of AF. The molar ratio of ACVMP to AF in the conjugate was 3.9. In rats, elimination of ACVMP-AF conjugate after i.v. injection showed two phase elimination kinetics. Initial apparent elimination rate constant in rats was $0.191\;min^{-1}$ which was greater than that of ACV. The elimination rate constant from terminal phase was $0.021\;min^{-1}$. Area under the total radioactivities versus time curve was found to be several times larger in liver than in other organs (spleen, intestine, lung and kidney) after i.v. administration of the conjugate labelled in the drug moiety. The above results suggested that ACVMP-AF conjugate was rapidly taken up by hepatocytes and could be a useful hepatic targeting system.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.167-177
• /
• 1986

This study was undertaken to compare the main differences and its effects of the 4 first bicuspid extraction on the face and dental arch of the class II div 1 malocclusion. The subjects consisted of twenty two class II div 1 malocclusion, four males, eighteen females, were 14 Years 2 Months old at the stan of the treatment 16 Year 3 Months old at the end of the treatment. (mean age) Twenty one variables were observed by comparing the statistical data of the pretreatment records with postteratment records, which were consited of eight varibles on the study model digitation, thirteen variables on the tracing of the lateral cephalogram. The following results were obtained. 1. No significant change was observed in the intercanine width. 2. Intercuspal widths of the 1st. premolar and 2nd. premolar were decreased. 3. Change of the overjet was dependant upon upper anterior rather than lower anterior. 4. No significant changes were observed in facial plane angle and ANB angle. 5. Uprighting of the lower 1st. molar had an effect on the increase of the facial height.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.119-131
• /
• 1986

The purpose of the study is to note the effects of the resection of the lateral pterygoid muscle on the mandibular growth in the growing rats. Twenty four female Wistar rats were used in the experiment. They were divided into three groups: group 1 ; bilateral sham operation group 2 ; bilateral resenction of the lateral pterygoid muscle group 3 ; unilateral resection of the lateral pterygoid muscle (The right lateral pterygoid muscle was resected and the left one was sham-operated.) Groups 1&2 were sacrificed eight weeks lateral and group 3, four weeks later. All specimens were measured with calipers, and stained with hematoxylin and eosin. Groups 1 & 2 were compared with each other. In group 3, the right side was compared with the left. The results were as follows: 1. In the growing rats, the resection of the lateral pterygoid muscle was followed by a decrease of the mandibular growth. After eight weeks, the condyle-mental foramen distance, the angular process-mental foramen distance, the size of the condylar head, the supradentale-first molar distance, and the diameter of the symphysis were significantly smaller than the control. 2. Resection of the lateral pterygoid muscle resulted in decrease of the thickness of the cartilage layer and the prechondroblastic-chondroblastic layer after four weeks. 3. After eight weeks, group 1 and group 2 were not different significantly in the histologic sections. 4. The condylar cartilage was stabilized eight weeks after the experiment.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.185-195
• /
• 1991

This study was undertaken to grope the correlation of the maximal bite force and tooth-craniofacial structure. The maximal bite force of 76 adult male, aged 18-28 (mean aged: $23.4{\pm}2.2$) years, was estimated and cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. 59.61kg of bite force in first molar, 45.38kg in premolar and 17.10kg in central incisor were arranged. 2. The bite force was negatively correlated to genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and positively correlated to posterior height of face, length of mandibular body, length of ramus, facial depth in craniofacial structure. 3. The group with strong bite force showed small genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and long posterior height of face, length of mandibular body, length of ramus, facial depth. So they manifested the tendency to brachycephalic pattern, on the other hand, the group with weak bite force manifested the tendency to dolichocephalic pattern. 4. There is no correlationships between bite force and mesial inclination of premolar axis in this subject. 5. It is considered bite force have an effect upon craniofacial pattern, especially upon the lower face.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2279-2282
• /
• 2007

Highly crystalline, uniform Fe nanoparticles were successfully synthesized and encapsulated in zirconia shell using sol-gel process. Two different approaches have been employed for the coating of Fe nanoparticle with zirconia. The thickness of zirconia shell can be readily controlled by altering molar ratio of Fe nanoparticle core to zirconia precursor in the first case where as reaction time was found to be most effective parameter to controlled the shell thickness in the second method. The structure and magnetic properties of the ZrO2-coated Fe nanoparticles were studied. TEM and HRTEM images show a typical core/shell structure in which spherical α-iron crystal sized of ~25 nm is surrounded by amorphous ZrO2 coating layer. TGA study showed an evidence of weight loss of less than 2% over the temperature range of 50-500 °C. The nanoparticles are basically in ferromagnetic state and their magnetic properties depend strongly on annealing temperature. The thermal treatment carried out in as-prepared sample resulted in reduction of coercivity and an increase in saturation magnetization. X-ray diffraction experiments on the samples after annealing at 400-600 °C indicate that the size of the Fe@ZrO2 particles is increased slightly with increasing annealing temperature, indicating the ZrO2 coating layer is effective to interrupt growing of iron particle according to heat treatment.