• Korean Chemical Engineering Research
• /
• v.61 no.2
• /
• pp.322-327
• /
• 2023

A design of experiments was evaluated in optimizing MOF-5 synthesis for acetylene adsorption. At first, mixture design was used to optimize precursor concentration, terephthalic acid, zinc acetate dihydrate and N,N-dimethylformamide. More specifically, 13 conditions with various molar ratios were designed by extreme vertices design method. After preparing the samples, XRD, N₂ physisorption and SEM analysis were performed for their characterization. Moreover, acetylene adsorption experiments were carried out over the samples under identical conditions. The optimal precursor composition for MOF-5 synthesis was predicted on a molar basis as follows: terephthalic acid : acetate dihydrate : dimethylformamide = 0.1 : 0.4 : 0.5. Thereafter, multi-level factorial design was designated to investigate the effect of synthesis reaction conditions such as temperature, time and stirring speed. By the statistical analysis of 18 samples designed, 4 reaction parameters were determined for additional adsorption experiments. Therefore, MOF-5 prepared under the synthesis time and temperature of 100 ℃ and 12 h, respectively, showed the maximum adsorption capacity of 15.1 mmol/g.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.281-287
• /
• 2009

An eruption failure can be observed for child and adolescent periods when the primary dentition is changed to the permanent dentition through the mixed dentition frequently. The eruption failure can lead to miss erupting times of the tooth, then it will cause a lot of problems including root resorption, esthetic problem, transposition of adjacent tooth, malocclusoin and etc. Especially, the maxillary first molar is importantly concerned with occlusion and growth and is an essential tooth for development and maintenance of occlusion. So, it is a momentous part of more proper occlusal management to find these abnormal cases at the early stage and solve the problems. The sorts of eruption failures of the maxillary first molars can be divided into delayed eruption, impaction and the primary retention and the secondary retention. When physical obstacles cause impaction, first of all they must be removed then we can treat the impaction with observation after removal, surgical exposure or orthodontic traction. If the source of impaction is an ectopic eruption, the treatment can be a brasswire, a pendulum appliance, a space maintainer or space regainer after the extraction of the second deciduous tooth and etc. These cases are made a diagnosis of eruption failures of the maxillary first molars in mixed dentition period and have good prognosises after my treatments. So I reported them.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.172-179
• /
• 2015

The developmental mechanism of root formation is a complex process. Hereditary and environmental factors may affect the morphology of the developing root. A total of 12 cases was presented with permanent first molars with abberant root morphology. Clinically, these teeth appeared as a normal crown. However, radiographically, the root was slender, twisted and characterized by irregular lengths. In addition, root trunk length was shorter and pulp chamber was obliterated. In these cases, periapical radiolucency and loss of lamina dura were often observed. In 6 cases, an abnormal root of the primary second molars were also present, as well as root malformation of permanent first molars. In 3 cases, permanent central incisors also had a dysmorphic crown. These cases almost all had medical history, such as premature birth, brain infection or congenital heart disease in infants. The present paper describes cases of permanent first molars with an abnormal root that are rarely reported in literature. This case may intensify the variation in the permanent first molar and is intended to reinforce the clinician's awareness of rare morphology of the roots.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.61-86
• /
• 1990

To study the effect of prostglandin $E_2$ and evening primrose oil on orthodontic tooth movement in rats, one hundred and sixty rats were divided into four groups of 40 rats each. One group, injected with saline on the palate subperiosteally, served as a control group. A second and third group were injected subperiosteally on the palate with $PGE_2$ $10{\mu}g$ and evening primrose oil 10mg respectively. The fourth group was given indomethacin $20{\mu}g/m{\ell}$ orally by water bottle. The maxillary first molar was moved mesially from the incisors using a 50gm force rubber band. In each group at the 1, 2, 3, 5, and 7th day, 4 rats were examined by light microscope, and 4 by electron microscope. The obtained results were as follows: 1. Osteoclastic activity was maximum at the 3rd day in the $PGE_2$ group on the interradicular alveolar bone of the first molar, followed by the evening primrose oil group, control group, and indomethacin group. 2. Root resorption and vacuolar changes were maximum in the $PGE_2$ group. 3. At the 3rd day of the $PGE_2$ group, the osteoclasts showed well developed ruffled borders and clear zones. At the same day, the evening primrose oil group also showed well developed ruffled borders and clear zones, but less than the $PGE_2$ group. 4. At the 3rd and 5th day of the $PGE_2$ group, fibroblasts showed phagocytized fragmented collagen fibers in the cytoplasm. At the 7th day of the $PGE_2$ group, fibroblasts showed collagen fibers forming at the cell membrane surface.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.269-277
• /
• 2004

A modified removable appliance for molar distalization called C-activator was used in a 10-year old male patient with a Class II anterior deep bite malocclusion with upper arch discrepancy. The treatment plan involved correcting the Class ll relationship, distalizing both upper first molars, and regaining space for the erupting canines. The C-activator, which was used for 6 months, consisted of a labial framework formed from .036-in stainless steel wire and an acrylic monobloc. Both the closed helices of the labial framework were compressed for reactivation during the C-activator treatment period. C-activator mechanics simultaneously achieved distalization of the upper first molars into their proper positions and repositioning of the mandible. After 21 months of treatment, the correct oberbite and overjet was obtained and contributed to an Improvement in facial balance. The treatment results were stable 6 months after debonding. Fabrication and placement of the new appliance and clinical procedures are detailed, and the treatment sequence and results of this case are presented as follows.

• Journal of dental hygiene science
• /
• v.7 no.4
• /
• pp.207-211
• /
• 2007

Many studies reported that the presence of cervical enamel projection (CEP) in cemento-enamel junction(CEJ) is greatly related to periodontal disease. The aim of this study was to investigate the prevalence of enamel projections in buccal, mesial, distal and lingual(palatal) surface of maxillary and mandibular first and second molars on extracted teeth. Among 660 teeth extracted due to the periodontal disease and dental caries in Seoul National University Dental Hospital was examined, 530 teeth which has distinct CEJ were examined with 8 times x electronic magnifier by one examiner. The prevalence of CEP for maxillary teeth (45.49%) was higher than that of mandible (39.62%). The first molar (45.22%) had more CEP than second (39.89%). Furthermore, buccal surface had highest incidence of CEP than other surfaces. The results of this study imply that the clinicians should take good care of the prevalence of CEP when scaling or root planning, plaque control instruction and periodontal surgery.

• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.357-366
• /
• 2018

Objective: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. Methods: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. Results: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). Conclusions: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.611-624
• /
• 1993

The purpose of this study was to analyze the stress distribution of the natural teeth, the implant, the prosthesis and the supporting tissue according to the types of implant and connection modality in the five-unit fixed partial denture with a implant pier abutment. A Two dimensional stress analysis model was constructed to represent a mandible missing the first and second premolars and first molar. The model contained a canine and second molar as abutment teeth and implant pier abutments with and without stress-absorbing element. Finite element models were created and analyzed using software ANSYS 4.4A for IBM 32bit personal computer. The results obtained were as follows. 1. Implant group, compared to the natural teeth group, showed a maximum principal stress at the superior portion of implants and a stress concentration at :he neck and end portion. 2. Maximum principal stress and maximum Von Mises stress were always lower in the case of rigid connection than nonrigid connection. 3. A cylinder type implant with stress absorbing element and screw type implant were generally similar in the stress distribution pattern. 4. A screw type implant, compared to the cylinder type implant, showed a relatively higher stress concentration at both neck and end portion of it. 5. Load B cases showed higher stress concentration on the posterior abutments in the case of nonrigid connector than rigid connector. 6. A maximum displacement was always lower in the case of rigid connection than nonrigid connection. These results suggest that osseointegrated implant can be used as an intermediate abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.533-541
• /
• 1993

This study was designed to help to be given esthetics in construction of denture and prosthodontic rehabilitation of anterior tooth region. The author took the facial straight photograph of 100 old aged people(male 50, female 50) above 55 years of age, who have natural teeth in anterior tooth region, in a resting and a smiling position. And the author measured and analyzed the lip shape, the relation between the lip and the teeth and the change of lip length and height when they were smiling. The results of this study were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 53%, straight was 28% and curved upward was 9%. 2. In the relation between the upper lip and the teeth, average smile was 53% , high smile was 26% and low smile was 21%. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of straight was 54%, the group of parallel was 40% and the group of reverse was 6%. 4. In the relationship between maxillary anterior incisor and lower lip, the group of not-touching was 92%, the group of touching was 5% and the group of the maxillary anterior incisor were slightly covered by the lower lip was 3%. 5. In the teeth displayed in a smile, displayed to second premolar was 50%, displayed to first molar was 34%, displayed to first premolar was 12%, and displayed to canine and second molar were 2%. 6. At smiling, the width of the mouth was 0.94 times of the interpupillary distance and 0.45 times of the full face width. 7. At smiling, the length of the upper lip was 0.73 times and lower lip was 0.98 times of the length in a resting postion and the width of the mouth corner was 1.19 times of the resting position.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.723-728
• /
• 2008

Purpose: During guided bone regeneration procedures for the augmentation of deficient alveolar ridge, primary closure of flap is necessary. For primary flap closure, flap is repositioned coronally and the zone of attached keratinized mucosa may decreased. The need for attached keratinized mucosa around dental implants is still controversial, but sufficient peri-implant attached keratinized mucosa would be beneficial for functional and esthetic aspects. This case report presents three cases that demonstrated free gingival graft for increasing the zone of peri-implant attached keratinized mucosa which was decreased after guided bone regeneration. Materials and Methods: In first case, maxillary incisors were extracted and guided bone regeneration was performed simultaneously. Because the membrane was exposed at 3 weeks after operation, the membrane was removed and free gingival graft was performed for primary flap closure. Free gingival graft was performed again at implant placement for the increase of attached keratinized mucosa. In second case, guided bone regeneration was performed on lower right first molar area, and implant was placed with free gingival graft. In third case, lower right molar area showed insufficient attached keratinized mucosa after implant placement with guided bone regeneration. When abutments were connected, free gingival graft with apically positioned flap was performed. Result: In these three cases, the zone of attached keratinized mucosa around dental implants was decreased after guided bone regeneration. And the increase of peri-implant attached keratinized mucosa could be obtained effectively by free gingival graft. Conclusion: Free gingival graft could be a effective treatment method increasing the zone of attached keratinized mucosa which was decreased after guided bone regeneration procedures.