• 한국대기환경학회지
• /
• 제28권6호
• /
• pp.666-674
• /
• 2012

The purpose of this study is to propose management strategies to lower the level of $PM_{10}$ concentration. First, this study analyzes the characteristics of particle sizes in three different areas, the residential, the roadside, and the industrial areas. Second, it has examined the size of particles which can influence on the increase of $PM_{10}$ concentration level. The distribution of particle size for $PM_{10}$ concentration was not different by regions. The highest portion in the observed $PM_{10}$ is near $0.3{\mu}m$. In addition, both near $2.5{\mu}m$ and near $5.0{\mu}m$ are found higher in portion. The fractions of $PM_{1.0}$ and $PM_{2.5}$ in $PM_{10}$ are 68.2% and 75.8% respectively. The fraction of $PM_{1.0}$ in $PM_{2.5}$ is 89.8%. The particle diameters contributed to the increase of $PM_{10}$ concentration are different by regions. In the residential area, the sizes of near $0.6{\mu}m$ and near $3.3{\mu}m$ particles are found to be the cause for the increase of $PM_{10}$ concentration level. However the particle sizes for the increase of $PM_{10}$ concentration level are $0.8{\mu}m$ and $0.5{\mu}m$ in roadside and industrial area respectively. Therefore, fine particles are found as the key factors to raise $PM_{10}$ concentration level in the two areas, while both fine and coarse particles are in the residential areas. When examined the $PM_{10}$ concentration level change, it was categorized by two different time zones, the high concentration level time and the lower concentration time. In high concentration time, the $PM_{10}$ concentration has increased in the morning in the residential and roadside areas. On the contrary, the level has increased in the evening in the industrial area. In low concentration time, the level of $PM_{10}$ concentration in the roadside area is significantly higher in the morning than the concentration level of other times. There is no significantly different concentration level found in the both residential and industrial areas throughout the day.

• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1263-1307
• /
• 2002

Pseudo-first-order rate constants (kobs) have been determined for the nucleophilic substitution reactions of p-nitrophenyl diphenyl phosphinate (PNPDPP) with substituted phenoxides (XC6H4O - ) and butane-2,3-dione monoximate (Ox- ) in 0.1 M borate buffer (pH = 10.0) at 25.0 ${\pm}0.1^{\circ}C$. The kobs value increases sharply upon addition of cethyltrimethylammonium bromide (CTAB) to the reaction medium up to near 7 ${\times}$ 10-4 M CTAB and then decreases smoothly upon further addition of CTAB. The rate enhancement upon the addition of CTAB is most significant for the reaction with -O2CC6H4O- and least significant for the one with C6H5O- , indicating that the reactivity of these aryloxides in the presence of CTAB cannot be determined by the basicity alone. The strength of the interaction of these anionic aryloxides with the positively charged micellar aggregates has been suggested to be an important factor to determine the reactivity in the presence of CTAB. The kobs value for the reaction with Ox- increases also upon the addition of CTAB. However, the increase in the kobs value is much more significant for the reaction with Ox- than for the one with ClC6H4O- , indicating that Ox- is less strongly solvated than ClC6H4O- in H2O. The ${\alpha}-effect$ shown by Ox- in H2O has been attributed to the ground-state solvation difference between Ox- and ClC6H4O- .

• 지능정보연구
• /
• 제24권3호
• /
• pp.135-155
• /
• 2018

본 연구는 최근 4차산업 혁명의 산물로 대두되고 있는 자율주행차가 대중교통 수단인 택시로 이용될 때 해석수준과 메시지 프레이밍에 따른 사용 의도의 차이를 분석하는 것이다. 해석수준이란 가까운 미래에 발생한 일과 먼 미래에 발생할 일을 가정하여 어떤 제품이나 서비스를 해석하는 것이 다르다는 것을 말한다. 메시지 프레이밍이란 긍정 혹은 부정의 표현 또는 혜택, 손실의 양극단의 메시지를 구성한 것을 말한다. 즉, 기존연구에서는 이 두 개념에 따라 제품이나 서비스의 가치를 다르게 해석한다고 한다. 본 연구는 자율주행차가 택시로 출시될 때 두 개념을 적용할 경우 사용 의도의 차이를 보이는지 살펴보고자 한다. 결과를 요약하면 우선, 메시지 프레이밍 구성에서 자율주행 택시를 이용할 경우 혜택(Gain)과 왜(Why) 사용해야 하는지를 설명한 메시지 형식과 자율주행 택시를 이용하지 않았을 경우 손실(Loss)와 어떻게(How)를 강조한 메시지를 구성하여 비교해 보았다. 두 메시지 프레이밍은 차이를 보였으며(t= 3.063) 혜택(Gain)과 왜(Why)를 설명한 메시지 형태가 더 높은 사용 의도를 보였다. 또한, 해석수준에 따른 결과를 요약하면 다음과 같다. 혜택(Gain) 및 손실(Loss)에 대한 먼 미래와 가까운 미래에 발생할 것을 가정한 경우 사용 의도에 차이가 있었으며, 구체적으로 혜택(Gain)을 설명한 메시지와 먼 미래에 발생할 것을 가정한 경우가 사용 의도가 높았다. 요약하면 자율주행 택시의 사용 의도를 높이기 위해서는 긍정의 메시지(Gain)와 먼 미래에 일어날 수 있는 것을 가정하여 사람들에게 메시지를 전달해야 한다는 결론이다. 또한, 본 연구를 통하여 향후 신기술의 출현에 대한 사용 의도 연구 시 연구방법을 활용할 수 있을 것이다.

• 한국실내디자인학회논문집
• /
• 제25권3호
• /
• pp.51-59
• /
• 2016

The technique for Eye-tracking is to trace the movements of pupils so that the eye's exploration response to be digitized. The procedure of Observation Experiment shows a mutual environmental characteristics between men and measuring devices. In order to improve the reliability and to secure the objectivity of the data acquired from eye-tracking, it is very important to analyze the procedures for the experiment to be prepared and the test data to be saved. Based on this viewpoint, the convergent exploration activities at the observation experiment with the objects of sport images were examined to find out what influences the context effect given by experimental environments have on this experiment. In addition, the starting time of attention affecting the reliability of observation data has been estimated. When the observation time is to be subdivided by the unit of second. The attention disperses for the individual characteristics to be appreciated. However, in case of analysis by the overall average, there was the problem that the section of attention dispersed to make it difficult to analyze the subjects' observation features. The study results made it possible to understand the physiological characteristics which were near unconsciousness, when there was an intensive attention for the first 3 seconds and the observation data were shown to be in ordinary range after 4 seconds. The analysis of observation with the focus of the intensive attention enabled the analysis with the first 3 seconds excepted so that it might approach the ordinary range of observation data. The distribution of attention for the first 3 seconds showed the intensive attention, which was on the center. The emergence of intensive attention and the overlapping of the centers can be considered as a context effect due to the correction for the preparing process of experiment. Accordingly, it is thought to be helpful to the security of objectivity and the construction of reliability of eye-tracking data to analyze the observation features shown after the deletion of the data for the first 3 seconds.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.585-590
• /
• 2014

Microstructural evolution in the thickness direction of an oxygen free copper processed by accumulative rollbonding (ARB) is investigated by electron back scatter diffraction (EBSD) measurement. For the ARB, two copper alloy sheets 1 mm thick, 30 mm wide and 300 mm long are first degreased and wire-brushed for sound bonding. The sheets are then stacked and roll-bonded by about 50% reduction rolling without lubrication at an ambient temperature. The bonded sheet is then cut to the two pieces of the same dimensions and the same procedure was repeated on the sheets up to eight cycles. The specimen after 1 cycle showed inhomogeneous microstructure in the thickness direction so that the grains near the surface were finer than those near the center. This inhomogeneity decreased with an increasing number of ARB cycles, and the grain sizes of the specimens after 3 cycles were almost identical. In addition, the aspect ratio of the grains decreased with an increasing number of ARB cycles due to the subdivision of the grains by shear deformation. The fraction of grains with high angle grain boundaries also increased with continuing process of the ARB so that it was higher than that of the low angle grain boundaries in specimens after 3 cycles. A discontinuous dynamic recrystallization occurred partially in specimens after 5 cycles.

• Journal of Astronomy and Space Sciences
• /
• 제28권3호
• /
• pp.173-181
• /
• 2011

Korea Astronomy and Space Science Institute researchers have installed and operated magnetometers at Mt. Bohyun Observatory to measure the Earth's magnetic field variations in South Korea. We, in 2007, installed a fluxgate magnetometer (RFP-523C) to measure H, D, and Z components of the geomagnetic field. In addition, in 2009, we installed a Overhauser proton sensor to measure the absolute total magnetic field F and a three-axis magneto-impedance sensor for spectrum analysis. Currently three types of magnetometer data have been accumulated. In this paper, we provide the preliminary and the first statistical analysis using the BOH magnetometer installed at Mt. Bohyun Observatory. By superposed analysis, we find that daily variations of H, D, and Z shows similar tendency, that is, about 30 minutes before the meridian (11:28) a minimum appears and the time after about 3 hours and 30 minutes (15:28) a maximum appears. Also, a quiet interval start time (19:06) is near the sunset time, and a quiet interval end time (06:40) is near the sunrise time. From the sunset to the sunrise, the value of H has a nearly constant interval, that is, the sun affects the changes in H values. Seasonal variations show similar dependences to the sun. Local time variations show that noon region has the biggest variations and midnight region has the smallest variations. We compare the correlations between geomagnetic variations and activity indices as we expect the geomagnetic variation would contain the effects of geomagnetic activity variations. As a result, the correlation coefficient between H and Dst is the highest (r = 0.947), and other AL, AE, AU index and showed a high correlation. Therefore, the effects of geomagnetic storms and geomagnetic substorms might contribute to the geomagnetic changes significantly.

• 한국물환경학회지
• /
• 제32권3호
• /
• pp.318-324
• /
• 2016

The significance of an integrated environmental management system implementation can be summarized into three sections. The first is that the paradigm of a permit system will be changed from the existing media-specific permits to cross-media permits. In the near future, the cross-media license will be granted based on the diagnostic results of the plant. The second is that it will be established through a social concensus, i.e., consultations with stakeholders and direct participation in the system design process of stakeholders. The third is that it will have flexibility in its operating system. In the near future, it will be possible to management an environment through its industrial workplace itself and determine if emission standards are being complied with or not through statistical methods. In addition there is also an urgent need for complementary parts in order to enhance the driving force of the integrated environmental management system which is based on transparency, reliability and flexibility. In other words, it is necessary to continuously promote in order to diffuse consensus and increase an understanding of implementation through an integrated environmental management system. It is also necessary to establish a new organization and educate authorized representatives so that they have the tools to smoothly perform the system.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.163-168
• /
• 2001

This dissertation describes the development of a sensor for measuring microscopic displacement where we use CoFeSiB amorphous alloy magnetic ribbon having near zero magnetostrictive properties. For the development of the sensor, we first fabricate amorphous alloy magnetic ribbon, and then investigate its physical and magnetic properties. Finally, its possibility of practical application as a displacement sensor is discussed. The experimental samples were made of near zero magnetostrictive (Co$\_$0.94/Fe$\_$0.06/)$\_$9/Si$_2$B$\_$19/ alloy which were fabricated by a rapid liquid quenching method. As a results, we got amorphous alloy magnetic ribbons of 12㎛ in thickness, 10 mm in length, and 2.5 m in width. It was found that the crystallization temperature and the Curie temperature are around 451$\^{C}$ and around 441$\^{C}$ respectively. We couldn't observe any noticeable change of the impedance frequency of 10MHz, but observed the impedance change of 3.76 %/Oe at 100 MHz. The inductance was nearly stable over the frequency range of 1∼10 MHz, In addition, it was observed that the variation of the inductance and the impedance were linear within the displacement ranges of 20∼60㎛. As the results of the experiments, it is suggested that the displacement sensor which is fabricated by using amorphous alloy magnetic ribbon of (Co$\_$0.04/Fe$\_$0.06/)$\_$79/Si$_2$B$\_$19/ compound, can be used as a sensor to detect microscopic displacement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.992-1006
• /
• 2008

The tunnel type spillways is under construction to increasing water reservoir capacity in Dae-am dam. Cutting-slope adjacent to outlet of spillways had been originally designed to be 63 degrees and about 65m in height. Examination is carried out in preceding construction that it is caused to some problems possibility which of machine for slope cutting couldn't approach to the site, blasting for cutting slope might have negative influence on highway and roads nearby, and fine view along the Tae-hwa river would be eliminated. In order to establish stability of tunnel and more friendly natural environment that we are carry out detailed geological surface survey and analysis of slope stability. So, we are design and construct for tunnel excavation with possible method that it is keep up natural slope. The result of survey and analysis that natural slope was divided 3 zone(A, B, C zone). In A and B zone, in first removed floating rock, high tensile tension net is install that it prevent of release and falling of rock, in order to security during under working. In addition to, pre-stressed rock anchor is install purpose of security during tunnel excavation because of fault zone near vertical developed above excavation level. Zone C is relatively good condition of ground, design is only carry out random rock bolt. All zone are designed and constructed drainage hole for groundwater and surface water is easily drain. Desinged slpoe is harmony with near natural environment. Successfully, construction is completed.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.67-79
• /
• 2001

The purpose of this research is to evaluate the biotope value in a metropolitan area after constructing the biotope evaluation model to develop biotope networking in the light of ecological landscape planning. In addition this study is to provide a basic frame of constructing the biotope networking system in the future with the evaluation results. The scope of this research is limited to high density residential area including some part of the forest adjacent to urban boundary. The results of the classified biotope in the research area have been turned out to be 24 patterns. According to the result of estimated nature value having the forth grade, three were forests combined with urban natural parks, schools near forests, and grasslands. There is a little place having first grade. We an deduce this fact that we have surveyed biotopes, having the minimum nature value and wider than children's park. As for the result of evaluated the structure, there were the forests of Seong-Dong, Meaho-Dong, and Kumho river, which is the forth grade. As for the evaluation of connection-function, the followings area were evaluated as the third grade-linear biotopes having highly valued and sustainable similarity - Seoul-Pusan Railroad, Dong-Daegu St., Kumho river, river basins. Bum대 park and a botanic park near Suesung lake, As for the evaluated the buffer-function, higly valued production biotopes, existing at a transition belt between he residential density areas, are Sawol-Dong, Meaho-Dong and Kumho river. When each of the indexes was evaluated, the core of the biotop contained most of natural biotopes. Large artificial biotopes were evaluated as an important biotopes, while small artificial biotopes were classified as a dot biotope. The future research on the concrete biotope networking construction, based upon performed evaluation in this research, should be conducted.