• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.47-76
• /
• 1994

This study was carried out to evaluate the effect of the crack propagation characteristics and bond stress of ceramo-metal system. In order to characterize the crack propagation, the static crack propagation stored in $37^{\circ}C$ distilled water of two commerical porcelains and the dynamic crack propagation under cyclic flexure load of ceramo-metal system were examined. In order to characterize the bond stress, the shear bond test, the 3-point flexure bond test, and the finite element stress analysis of ceramo-metal system were conducted. The results obtained were as follows : 1. Bulk densities and Young's moduli of opaque porcelains increased with repeated firing. 2. Maximum fracture toughness during 4 firing cycles showed at the group of 4 firing cycles in Ceramco porcelain and 2 firing cycles in Vita porcelain. 3. Shear bond strength and flexure bond strength of Ceramco-Verabond specimen were larger than those of Ceramco-Degudent G specimen (p<0.05). 4. Interfacial stresses under three point flexure bond test were concentrated at the edges of ceramometal system. 5. When a cyclic flexure load was applied, the crack growth rate of porcelain surface of ceramometal specimens was decreased as load cycles increased.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권1호
• /
• pp.102-111
• /
• 2014

An analytical model was developed to understand the physics and predict the functional performance of a pin puller. The formulated model is based on one-dimensional gas dynamics for an ideal gas. Resistive forces against pin shaft movement were measured in quasi-static mechanical tests, the results of which were incorporated into the model. The expansion chamber pressure and the pin shaft displacement were measured from an actual firing test and compared to the model prediction. The gas generation rate was adjusted by a correction factor, and the heat transfer rate was obtained through parametric analysis. The validity of the model is assessed for additional firing tests with different amounts of pyrotechnic charge. This model can provide knowledge on how the pin puller functions, and on which design parameters contribute the most to the actuation of the pin puller. Using this model, we estimate the functional safety factor by comparing the energy generated by the pyrotechnic charge to the energy required to accomplish the function.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.55-60
• /
• 2017

An anorthite-based traditional ceramic was developed by adding secondary flux materials to a mixture of kaolin and $CaCO_3$ in order to minimize the deformation during the sintering process. Three flux materials, feldspar, talc, and frit, were evaluated by comparison with two commercial chinaware bodies. Anorthite body with glass frit exhibited poor firing shrinkage. Poor mechanical properties (modulus of rupture, MOR < 30 MPa) was observed for the bodies with feldspar. Another anorthite body was formulated with wollastonite as a Ca source. The fired body showed a MOR of 81 MPa and a shrinkage rate of 6% when wollastonite was added up to 50%. In the XRD analysis, the phase ratio between anorthite and quartz was the highest in the specimen with 50% wollastonite addition. Homogeneous and relatively small closed pores were observed in the microstructural analysis. These results suggest that a ceramic body formulated with 50% kaolin and 50% wollastonite can be fired at $1200^{\circ}C$ with a 6% firing shrinkage rate, giving rise to minimal sintering deformation.

• PNF and Movement
• /
• 제1권1호
• /
• pp.19-25
• /
• 2003

Objectives: The purpose of this article is to summarize the effect of stretch stimulus on muscle contraction facilitation. Methods : Some studies of the stretch reflex. ${\gamma}-motor$ system, and the effect of stretch stimulus on muscle activation were reviewed. Results : To facilitate muscle contraction, before the movement is started, the prime mover is in stretched position. The patient must be instructed to occur voluntary muscle contraction after quick stretching. It elicits the functional stretch reflex to produce a more powerful and functional contraction. The intensity of muscle contraction depends on two ways. One is firing rate of ${\alpha}-motor$ neuron by sensory information from the periphery induced in stretched position and stretch reflex. The other is excitation level of the cortical motor area and the corresponding motor neurons. Conclusions: To activate central nervous system and to increase firing rate of ${\alpha}-motor$ neuron. the therapist should apply quick stretch for the patient with stretched position and the patient should make voluntary muscle contraction.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.157-159
• /
• 2014

This article describes an investigation of basic combustion characteristics of radiant burner with various firing rate and equivalence ratios in porous metal. As a main experimental condition, firing rates and equivalence ratios each were adjusted from 204 to $408kW/m^2$ and 0.6 to 1.3. The purpose of this study is to investigate radiation efficiency using two experiment methods. The first way is to calculate the radiation efficiency by measuring the temperature of the burner surface, and the second is to compute the radiation efficiency by measuring the radiation intensity of the burner surface with a radio meter. The value of the radiation efficiency did not exactly match in the two cases. But we figured out that in accordance with increasing heat power, radiation efficiency was decreased. And additional complementary experiment on the relationship between these values is needed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.503-506
• /
• 2009

본 연구에서는 추력 650 kgf 급의 PE/N2O 하이브리드 로켓 모터의 지상 연소시험을 수행하였다. 초기 실험에서 산화제 유량이 작게 유입됨으로 인해 연소실 압력 및 추력이 설계치 만큼 확보되지 못함을 확인 하였다. 이를 보완하기 위해 노즐목 감소 및 산화제 유량을 증대하여 실험을 수행하였고, 실험에서 발생하는 연소현상을 분석하였다. 또한 sub-scale과 lab-scale의 실험결과를 통해 scale에 따른 연소특성 변화를 비교 분석 하였고, 동일 산화제 유속에서 sub-scale의 후퇴율이 lab-scale의 후퇴율보다 차이는 작지만 낮게 나타남을 확인했다. 본 연구의 결과를 통해 실제 하이브리드 사운딩 로켓 개발을 위해 고려되어야 할 사항을 파악할 수 있었다.

• Advances in aircraft and spacecraft science
• /
• 제4권3호
• /
• pp.281-296
• /
• 2017

The axial-injection end-burning hybrid rocket proposed twenty years ago by the authors recently recaptured the attention of researchers for its virtues such as no ${\zeta}$ (oxidizer to fuel mass ratio) shift during firing and good throttling characteristics. This paper is the first report verifying these virtues using a laboratory scale motor. There are several requirements for realizing this type of hybrid rocket: 1) high fuel filling rate for obtaining an optimal ${\zeta}$; 2) small port intervals for increasing port merging rate; 3) ports arrayed across the entire fuel section. Because these requirements could not be satisfied by common manufacturing methods, no previous researchers have conducted experiments with this kind of hybrid rocket. Recent advances in high accuracy 3D printing now allow for fuel to be produced that meets these three requirements. The fuel grains used in this study were produced by a high precision light polymerized 3D printer. Each grain consisted of an array of 0.3 mm diameter ports for a fuel filling rate of 98% .The authors conducted several firing tests with various oxidizer mass flow rates and chamber pressures, and analysed the results, including ${\zeta}$ history, using a new reconstruction technique. The results show that ${\zeta}$ remains almost constant throughout tests of varying oxidizer mass flow rates, and that regression rate in the axial direction is a nearly linear function of chamber pressure with a pressure exponent of 0.996.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권3호
• /
• pp.297-305
• /
• 1998

This study used in vivo intracellular recording in rat hippocampus to evaluate the effect of lidocaine and MK-801 on the membrane properties and the synaptic responses of individual neurons to electrical stimulation of the commissural pathway. Cells in control group typically fired in a tonic discharge mode with an average firing frequency of $2.4{\pm}0.9$ Hz. Neuron in MK-801 treated group (0.2 mg/kg, i.p.) had an average input resistance of $3.28{\pm}5.7\;M{\Omega}$ and a membrane time constant of $7.4{\pm}1.8$ ms. These neurons exhibited $2.4{\pm}0.2$ ms spike durations, which were similar to the average spike duration recorded in the neurons of the control group. Slightly less than half of these neurons were firing spontaneously with an average discharge rate of $2.4{\pm}1.1$ Hz. The average peak amplitude of the AHP following the spikes in these groups was $7.4{\pm}0.6$ mV with respect to the resting membrane potential. Cells in MK-801 and lidocaine treated group (5 mg/kg, i.c.v.) had an average input resistance of $3.45{\pm}6.0\;M{\Omega}$ and an average time constant of $8.0{\pm}1.4$ ms. The cells were firing spontaneously at an average discharge rate of $0.6{\pm}0.4$ Hz. Upon depolarization of the membrane by 0.8 nA for 400 ms, all of the tested cells exhibited accommodation of spike discharge. The most common synaptic response contained an EPSP followed by early-IPSP and late-IPSP. Analysis of the voltage dependence revealed that the early-IPSP and late-IPSP were putative $Cl^--and\;K^+-dependent$, respectively. Systemic injection of the NMDA receptor blocker, MK-801, did not block synaptic responses to the stimulation of the commissural pathway. No significant modifications of EPSP, early-IPSP, or late-IPSP components were detected in the MK-801 and/or lidocaine treated group. These results suggest that MK-801 and lidocaine manifest their CNS effects through firing pattern of hippocampal pyramidal cells and neural network pattern by changing the synaptic efficacy and cellular membrane properties.

• 한국가스학회지
• /
• 제27권4호
• /
• pp.85-91
• /
• 2023

본 연구에서는 GT24 가스터빈의 1단 연소기인 EV버너를 대상으로 수소연료 혼소에 대한 화염거동, 연소 진동 및 NOx 배출 특성에 대한 실험적 연구를 수행하였다. 수소 혼소율이 증가할수록 NOx 배출 농도가 증가하는 결과를 확인하였다. 이러한 변화는 연료 밀도 변화로 인한 침투깊이 변화, 화염전파속도 증가에 따른 화염위치 변화에 기인한 연료 혼합도 감소와 연소진동으로 인한 시간적 혼합도 섭동 영향이 복합적으로 작용한 결과로 판단되었다. 1.3~3.1bar 범위의 가압 시험을 통해 고압 운전 조건의 NOx 배출 특성을 예측하고 이를 토대로 천연가스용 EV 버너의 수소혼소 한계를 평가하였다.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.181-186
• /
• 2007

본 연구에서는 플라즈마 디스플레이 패널의 방전 특성과 MgO 보호막 물성에 영향을 미치는 MgO 증착률에 대해 분석을 하였다. 물성 특성으로 결정 방향과 표면 거칠기 결정 구조 및 음극선 발광을 XRD (X-ray Diffraction), AFM (Atomic Force Microscopy), Mono-CL (Mono Cathode Luminescence analysis)등을 이용하여 측정하였고, 방전 특성으로는 방전개시전압과 방전 전류, 휘도를 진공 챔버와 오실로스코프 (TDS 540C), 전류 프로브 (TCP 312A), 휘도 색차계 (CS-100A)를 이용하여 측정하였다. 실험 결과 $5{\AA}/sec$의 증착률이 최적의 증착률임을 확인하였고, 또한 MgO의 증착률에 따라서 MgO 보호막의 물성특성이 변화하고 이에 의해서 전기적 광학적 특징이 영향을 받는 것을 확인하였다. 즉, 증착률 $5{\AA}/sec$을 기준으로 증착률이 증가할수록 (200) 결정 방향 및 음극선 발광의 밀도가 감소되고, 동작 전압은 증가하며 점차 효율이 나빠지는 경향을 보인다.