• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.539-546
• /
• 2007

An experimental study was performed to investigate the characteristics of chemiluminescence in a radiant burner, varying the excess air ratio from 0.91 to 1.67 at firing rate 80.5 to 134.2 kW/m2 on $OH^*,\;CH^*,\;{C_2}^*$ in LNG-Air premixed flames. The signals from electronically excited states of $OH^*,\;CH^*,\;{C_2}^*$ were detected using a Intensified Couple Charged Detector (ICCD) camera. The measurements of exhausted emission were made to investigate the correlation between chemiluminescence and emissions. The chemiluminescence intensity was increased with increase of firing rate like characteristics of $NO_x$ emission. $NO_x$ also increased with increase of firing rate and excess air ratio. It is found that offset of firing rate is more dominant excess air ratio $NO_x$ emission. The maximum chemiluminescence intensity occurs near the stoichiometric excess air ratio or lean conditions in case of high firing rate and the maximum intensity occurs rather than rich conditions in case of relatively low firing rate. Amount of $NO_x$ emission is maximum at near stoichiometric excess air ratio, which is chemiluminescence intensity is maximum.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.271-281
• /
• 2011

Purpose: The aim of this study is to investigate the changes in hardness and microstructure of a dental multipurpose alloy after simulated complete firing with controlled cooling rate and holding time by characterizing the changes in hardness and microstructure after simulated firing with various cooling rates and holding times. Methods: Before hardness testing, the specimens were solution treated and then were rapidly quenched into ice brine. The specimens were completely fired in furnace. Hardness measurements were made using a Vickers microhardness tester. The specimens were examined at 15 kV using a field emission scanning electron microscope. Results: The maximum hardness value was obtained at stage 0 after simulated firing with various cooling rates (quick cooling, stage 0, stage 1, stage 2, stage 3). By the repetitive firing, the hardness of the tested alloy decreased gradually. By holding the specimen at $500^{\circ}C$ for 10-20min after simulated firing, the hardness increased apparently. However, to hold the alloy for long periods of time in the relatively high temperature after simulated firing resulted in the formation of thick oxidation layer. The oxide film formed on the surface of the alloy after simulated complete firing with controlled cooling rate, which was mainly composed of O and Zn. Conclusion: It is reasonable to hold the alloy at $500^{\circ}C$ for 10-20min after complete firing in other to improve the final hardness of the alloy.

• 대한치과재료학회지
• /
• 제44권4호
• /
• pp.337-348
• /
• 2017

본 연구에서는 소성 시 냉각속도를 조절하는 것과 동시에 소성 후 추가적인 후열처리를 시행하는 것이 후열처리를 시행하지 않는 것보다 합금의 경도 상승에 더욱 효과적인지 알아보고자, 다목적용 Ag-Pd-Zn-In-Sn계 합금을 이용하여 모의소성 시 냉각속도의 조절이 소성 및 후열처리에 따른 합금의 경도변화에 미치는 영향을 조사하여 다음과 같은 결과를 얻었다. 다목적용 Ag-Pd-Zn-In-Sn계 합금의 모의소성 시 냉각속도를 조절함에 따라 합금의 연화가 억제되었다. Stage 0(4단계의 냉각속도 중 가장 빠른 속도; 소성로 챔버가 소성 종료 즉시 전체가 열린 상태로 냉각되는 단계)으로 냉각속도를 조절하여 합금을 소성한 경우, 모의소성 과정에서 합금이 연화되었으며, 적절한 시간동안의 후열처리가 경도상승에 효과적이었다. Stage 3(4단계의 냉각속도 중 가장 느린 속도; 소성로 챔버가 소성완료 후 닫혀진 상태로 냉각되는 상태)으로 냉각속도를 조절하여 합금을 소성한 경우, 모의소성 과정에서 합금이 연화되지 않았으며, 추가적인 후열처리는 합금의 경도를 하강시켰다. Stage 0으로 모의소성 된 합금에서 30분간의 후열처리에 의해 경도가 크게 상승한 원인은 소성에 의해 기지 내로 고용되었던 석출물이 다시 기지 밖으로 활발하게 석출된 것에 기인하였다. Stage 3으로 모의소성 된 합금에서는 후열처리에 의해 석출물이 기지 내로 다시 고용되었고, 새로운 석출상의 생성이 미미하여 후열처리가 경도 상승에 기여하지 못하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.69-72
• /
• 2015

Computational fluid dynamics (CFD) modeling of large-scale coal-fired boilers requires a complicated set of flow, heat transfer and combustion process models based on different degrees of simplification. This study investigates the influence of coal devolatilization, char conversion and turbulent gas reaction models in CFD for a tangential-firing boiler at 500MWe capacity. Devolatilization model is found out not significant on the overall results, when the kinetic rates and the composition of volatiles were varied. In contrast, the turbulence mixing rate influenced significantly on the gas reaction rates, temperature, and heat transfer rate on the wall. The influence of char conversion by the unreacted core shrinking model (UCSM) and the 1st-order global rate model was not significant, but the unburned carbon concentration was predicted in details by the UCSM. Overall, the effects of the selected models were found similar with previous study for a wall-firing boiler.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.167-172
• /
• 2011

In this paper, a study on variation of an accuracy rate as the gradient of a rifle is shown. In the a state of hostilities, a soldier is not easy to take a shot vertically against the ground. If a soldier shoots as the pistol is inclined, how the accuracy rate is changed. While the pistol is shot, the change of ballistic curve is estimated. And we also verify the accuracy rate through the firing test. Then we compare two results and present some ideas which overcome the decrease of an accuracy rate. Hereafter, it is possible to adapt in the future soldier system and expected that the accuracy rate of the conventional gun is maintained.

• BMB Reports
• /
• 제51권1호
• /
• pp.3-4
• /
• 2018

Parkinson's disease (PD) is a debilitating disorder resulting from loss of dopamine neurons. In dopamine deficient state, the basal ganglia increases inhibitory synaptic outputs to the thalamus. This increased inhibition by the basal ganglia output is known to reduce firing rate of thalamic neurons that relay motor signals to the motor cortex. This 'rate model' suggests that the reduced excitability of thalamic neurons is the key for inducing motor abnormalities in PD patients. We reveal that in response to inhibition, thalamic neurons generate rebound firing at the end of inhibition. This rebound firing increases motor cortical activity and induces muscular responses that triggers Parkinsonian motor dysfunction. Genetic and optogenetic intervention of the rebound firing prevent motor dysfunction in a mouse model of PD. Our results suggest that inhibitory synaptic mechanism mediates motor dysfunction by generating rebound excitability in the thalamocortical pathway.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.611-615
• /
• 2015

비행기 방어용 대공포는 저고도 방어체계로 사용되고 있으며, 방어능력 극대화를 위해 대부분 고발사율 대공포를 두개 이상 탑재하여 교전 시 명중률을 높이고 있다. 고 발사율 대공포의 경우, 포열진동 및 탄의 불균형 분산은 정확한 조준사격 및 명중률에 아주 결정적인 영향을 미치게 된다. 따라서 사격 진동 및 충격량을 감소하는 구조는 대공포 체계에서는 주요 설계 대상이다. 본 연구에서는 차량의 현가장치 특성에 따라 고발사율 대공포 체계에서 발사시스템의 진동충격으로부터 차단하는 능력을 향상시키고, Recurdyn 과 Adams 를 이용한 동적 거동해석과 실 사격 시험결과를 비교하여 명중률에 영향을 미치는 현가 형태, 위치 및 수량에 따른 체계 자세 흔들림을 예측하였다. 본 연구를 통하여 대공포에 적합한 현가장치와 포 스프링 등과 같은 구성품을 선정할 수 있는 기초연구를 수행하였다.

• 한국전문물리치료학회지
• /
• 제11권3호
• /
• pp.85-90
• /
• 2004

The purpose of this study was to find the difference in muscle firing rate between each muscle according to the knee angle with the quadriceps femoris which is a representative action muscle of the lower extremity. Seven normal healthy subjects were recruited. The median frequency (MDF) of muscle contraction was recorded from vastus lateralis, vastus medialis, and rectus femoris muscles using the surface EMG, in 5 seconds, during maximal isometric knee extension. The data were analyzed by the two-way repeated ANOVA. The results of the study were as follows: 1) median frequency of muscle contraction was significantly higher at the vastus lateralis, vastus medialis, and rectus femoris in descending order. 2) median frequency of muscle contraction was significantly higher at the $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$ in descending order. Consequently, muscle recruitment at the knee decreases the EMG activity of the lengthened muscle. This study suggests that the change in EMG activity at different muscle lengths resulted in affecting the muscle firing rate during the knee extension.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권6호
• /
• pp.1-5
• /
• 2014

The following research was initiated in order to compare the relationship between the amount of gunfire shot and its resulting heavy metal pollution rate. The research was conducted at two firing ranges located inside a military unit stationed in the rear strategical area, where one full distance firing range is used by soldiers in active service, and the other is used by recruits and reserves. The heavy metal pollution rate was measured also on water sample collected from the target zone while raining. Based on values such as the real amount of gunshot fired, amount of heavy metal in the soil of the target zone, and the degree of heavy metal pollution for each firing range, the research showed that although pollution rate was higher when more gunshots were fired, there was no close correlation between the two. The water samples showed that this might result from the soils containing heavy metals eroded and transported by rain due to the target zone having no vegetation.

• 한국국방경영분석학회지
• /
• 제17권2호
• /
• pp.44-53
• /
• 1991

This paper is aimed to develop a Lanchester type combat model for the direct-fire engagement. This model incorporates number of combatants, inter-firing time, detection time by movement, detection probability by the signature of fire, where the inter-firing time and the detection time are assumed to follow a negative exponential distribution. The approach to modeling is as follows : in the process of an engagement, a combatant takes one of the states('observing' state or 'firing' state), a combatant is initially in the observing state, if the combatant detects a target, he changes his state from 'observing' to 'firing' and will cause attrition to the opposing forces. Thus this transition mechanism is embodied into the differential equation form with each transition rate. A limited examination of the validity has been conducted by comparison with the Monte-Carlo simulation model 'BAGSIM', and with a traditional Deterministic Lanchester model.