• 보존과학회지
• /
• 제32권4호
• /
• pp.511-520
• /
• 2016

본 연구는 고온 XRD 분석법을 적용하여 우즈베키스탄 카라테파 불교사원에서 수습한 점토 재질로 된 벽돌의 소성온도를 추정하는데 목적이 있다. 사원에서 수습한 점토벽돌의 구성광물은 석영, 사장석, 알칼리장석, 운모, 녹니석, 석회석, 각섬석 등이 동정되고, 일부 시료에서 석고가 확인되며, 석고는 벽돌의 점착력을 향상시킬 목적으로 사용된 것으로 판단된다. 소성온도 추정결과, 구운 벽돌인 UZ-1시료에서 석영, 사장석, 휘석계열의 광물이 동정되어 지질온도계를 이용한 소성온도는 $900{\sim}1200^{\circ}C$로 추정된다. 반면 점토벽돌인 UZ-5에 고온 XRD 분석법을 적용해 보면, $1000^{\circ}C$에서 석회석이 소멸하고, $1050^{\circ}C$에서 녹니석의 회절 피크가 약해지는 것으로 보아 소성온도는 $1000{\sim}1050^{\circ}C$인 것으로 추정된다. 또한 휘석계열의 광물은 재현실험에서 $1050^{\circ}C$에서 생성되는 것을 확인하였다. 결과적으로 고온 XRD 분석 결과에 의한 소성온도 추정은 일반적인 광물 동정법에 비해 보다 정확한 추정이 가능하며, 실험 하에서 광물의 소멸 및 생성 온도 영역을 살펴볼 수 있는 분석법임을 확인하였다.

• 헤리티지:역사와 과학
• /
• 제36권
• /
• pp.267-297
• /
• 2003

The plain coarse pottery from the Unjeonri Bronze Age relic sites in the Cheonan, Korea were studied on the basis of clay mineralogy, geochemistry and archaegeological interpretations. For the research, the potteries are utilized at the analysis for 6 pieces of plain coarse potteries. Color of the these potteries are mainly light brown, partly shows the yellowish brown to reddish brown. The interior, surface and inside of the pottery appear as different colors in any cases. Original source materials making the Unjeonri potteries are used of mainly sandy clay soil with extreme coarse grained irregularly quartz and feldspar. The magnetic susceptibility of the Unjeonri pottery range from 0.20 to 1.20. And the Unjeonri soil's magnetic susceptibility agree almost with 0.20 to 1.30. In the same magnetization of soil and pottery, the results revealed that the Unjeonri soil and low material of pottery are same produced by identical source materials. The Unjeonri potteries and soil are very similar patterns with all characteristics of soil mineralogy, geochemical evolution trend. The result seems to be same relationships between the behavior and enrichment patterns on the basis of a compatible and a incompatible elements. Consequently, the Unjeonri potteries suggest that made the soil to be distributed in the circumstance of the relic sites as the raw material are high in a greater part. In the Unjeonri soil, the kaolinite is common occurred minerals. However, in the Unjeonri pottery, the kaolinite was not detected in all broken pieces. The kaolinite was presumed to destroy crystal structure during the firing processes of over $550^{\circ}C$. The quartz is phase transition from ${\alpha}$-quartz to ${\beta}$-quartz at $573^{\circ}C$, but the Unjeonri pottery did not investigated any phase transition evidences of quartz. The chorite was detected within the mostly potteries and soils. As the results, the Unjeonri potteries can be interpreted by not experiencing a firing temperature over $800^{\circ}C$. The colloidal and cementing materials between the quartz and low materials during the heating did not exist in the internal part of the potteries. An any secondary compounds by heating does not appear within the crack to happen during the dry of the pottery. The hyphae group are kept as it is with the root tissue of an organic matters to live in the swampy land. In the syntheses of all results, the general firing condition to bake and make the Unjeonri pottery is presumed from $550^{\circ}C$ to $800^{\circ}C$. However, the firing condition making the Unjeonri pottery can be different firing temperature partially in one pottery. Even, the some part of the pottery does not take a direct influence on the fire.

• 보존과학회지
• /
• 제32권2호
• /
• pp.273-291
• /
• 2016

차령산맥 남북의 7개 유적에서 신석기시대 빗살무늬 토기부터 조선시대 백자까지 시대적으로 일부 시료를 선별하여 물리화학적 및 광물학적 정량분석을 통해 고대 세라믹의 제작기술과 특성을 해석하였다. 연구대상 선사시대 토기는 연질에 테쌓기한 흔적이 나타나며, 삼국시대 토기는 연질과 경질이 공존하나 자비와 저장용기는 모두 테쌓기한 반면 배식기는 물레성형하였다. 태토의 정선도가 높은 삼국시대 이후 토기와 달리 신석기 및 청동기시대 토기는 사질태토에 높은 광물 함량을 보이며, 태토보다 큰 비짐이 다량 확인된다. 청자와 백자 기질에서는 일차광물이 거의 나타나지 않으나 고온생성 광물의 함량이 높게 동정되었다. 분석시료들은 시기에 관계없이 유적에 따라 주성분 및 미량원소에 약간의 차이가 나타났다. 지구화학적 거동특성도 거의 동일하여 태토의 기본적 성질은 유사한 것을 지시한다. 작열감량은 0.01~12.59wt.% 범위를 보여 편차가 크나, 선사시대에서 삼국시대로 가며 급격히 감소한다. 이들은 소성에 따른 중량감소율과 관련이 있으며, 태토의 소성도와 고온생성 광물의 검출 함량에 따라 5그룹의 추정 소성온도로 분류된다. 신석기시대와 청동기시대 토기는 모두 $750{\sim}850^{\circ}C$ 그룹에 속하고, 삼국시대 토기는 $750{\sim}1,100^{\circ}C$의 소성온도 범위에서 다양하게 확인되며, 청자와 백자는 $1,150{\sim}1,250^{\circ}C$의 고온에서 소성된 것으로 나타났다. 제작시기에 따른 태토의 정선도와 소성온도 차이는 제작기술이 발전함에 따라 원료수급과 소성방식이 변화된 결과로 보인다. 그러나 같은 시기에도 제작방법에 차이를 보이기도 하여, 단순히 한 방향으로 진화된 발전보다는 사용 목적과 필요에 따라 활용한 것으로 해석된다.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.167-172
• /
• 2020

PURPOSE. The aim of the present study was to investigate the passive fit of metal substructure after repetitive firing processes in implant-supposed prosthesis. MATERIALS AND METHODS. Five implants (4 mm diameter and 10 mm length) were placed into the resin-based mandibular model and 1-piece of screw-retained metal substructure was produced with the direct metal laser sintering (DMSL) method using Co-Cr compound (n = 10). The distance between the marked points on the multiunit supports and the marginal end of the substructure was measured using a scanning electron microscope (SEM) at each stage (metal, opaque, dentin, and glaze). 15 measurements were taken from each prosthesis, and 150 measurements from 10 samples were obtained. In total, 600 measurements were carried out at 4 stages. One-way ANOVA test was used for statistical evaluation of the data. RESULTS. When the obtained marginal range values were examined, differences between groups were found to be statistically significant (P<.001). The lowest values were found in the metal stage (172.4 ± 76.5 ㎛) and the highest values (238.03 ± 118.92 ㎛) were determined after glaze application. When the interval values for groups are compared with pairs, the differences between metal with dentin, metal with glaze, opaque with dentin, opaque with glaze, and dentin with glaze were found to be significant (P<.05), whereas the difference between opaque with metal was found to be insignificant (P=.992). CONCLUSION. Passive fit of 1-piece designed implant-retained fixed prosthesis that is supported by multiple implants is negatively affected by repetitive firing processes.

• 대한기계학회논문집B
• /
• 제31권9호
• /
• pp.790-798
• /
• 2007

An experimental study was performed to investigate the effects of mixing quality, inlet pressure, nozzle diameter on CO, NO emission and radiation characteristics in porous ceramic fiber radiant burners. Observations of combustion characteristics occurring inside the burner system which was insulated fiber mat, were investigated by measuring emission and radiation characteristics. Combustion was achieved at the firing rate of $88{\sim}99\;kcal/hr$, inlet pressure of $100{\sim}250mmH_2O$. The fiber burner exhibit significant both spectral intensity peaks in the bands at $2.5{\mu}m\;and\;4.0{\mu}m$ relatively. There is a small difference in the variable mixing tube. However spectral intensity increased with the firing rate. CO emissions were found to be strongly dependent on the operating conditions. There was a tendency that CO concentration increased as the firing rate increases. the reason for rise of CO concentration is that is becomes it the relatively rich condition. Relatively low NO emission was observed for the whole operating range. The NO concentration is maximal at the firing rate of approximately 2850 kcal/hr and an air ratio of about 1.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.956-962
• /
• 1992

The predominant sintering mechanisms of low firing temperature ceramic substrate which consists of borosilicate glass containing alumina as a filler are the rearrangement of alumina particles and the viscous flow of glass powders. In this system, sintering condition depends on the volume ratio of alumina to glass and on the particle size. When the substrate contains about 35 vol% alumina filler and the average alumina particle size is 4 $\mu\textrm{m}$, the best firing condition is obtained at the temperature range of 900∼1000$^{\circ}C$. The extensive rearrangement behavior occurs at these conditions, and the optimum sintering condition is attained by smaller size of glass particles, too. The formation of cristobalite during sintering causes the difference of thermal expansion coefficient between the substrate and Si chip. This phenomenon degradates the capacity of Si chip. Therefore, the crystallization should be prevented. In the alumina filled borosilicate glass system, the crystallization does not occur. This effect may have some relation with aluminum ions in alumina. For aluminum ions diffuse into glass matrix during sintering, functiong as network former.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• 기술사
• /
• 제23권6호
• /
• pp.117-122
• /
• 1990

The effect of firing on the development of strength of china with maturing range of a series of glaze that gave no defect on firing was observed in an electrical furnace and oil-fired kiln. The body formular is as follows (equation omitted), and it was applied to a selected china body. Porcelain glaze formular is in the following. (equation omitted) The result obtained is sumarized as follows : (1) It was found that the strength of porcelain increases when the A1$_2$O$_3$ moles of the glaze increses, and the strength of porcelain decreases when the SiO$_2$ moles of glaze decreases at 3.9-5.9 moles, and increases again when the SiO$_2$ moles increases at 5.9-7.9 notes. (2) It was found the most safe glaze is No. 25 glaze.

• 대한화학회지
• /
• 제4권1호
• /
• pp.27-37
• /
• 1957

High-fire stain is influenced by the conditions of glaze, firing atmosphere, etc. On the contrary, low fire stain is not influenced by those conditions but obtainable in arbitrary colors and it is indispensable for pottery decoration. It is difficult for us to study into the color in the sphere of result publication method and expression of color. Looking over the literature on this subject, I have been confronted with much difficulties, accordingly, I made a basic and systematic experiment as to six low-firing stains (blue, green, blue-green, brown black and yellow) and made it proper to be applied in these studies. On pigment, I confirmed the influence of the assistant coloring matter by mixing up the coloring matter and the assistant coloring matter in various proportions. On flux, I measured the melting point by making PbO-$SiO_2$ system and PbO-$B_2O_3-SiO_2$ system and decided the range of usage. Also I checked the coloring by making the pigment on laze with pigment and flux manufactured, and concluded the pigment and flux adaptation to it.

• 한국세라믹학회지
• /
• 제14권2호
• /
• pp.95-103
• /
• 1977

Characteristics of Ham Pyong clay and clay-organic complexes were investigated by means of geological exploration, chemical analysis, X-ray diffraction, differential thermal analysis, electron microscopy, thermal mechanical analysis, cation exchange capacity and viscosity measurement. The results are as follows; 1) This caly is a transported clay which has black and white colors, and the amounts of deposit are estimated about 1, 600, 000M/T. 2) The major mineral phases identified by X-ray diffraction are kaolinite, sericite and halloysite and the minor phases are quartz and feldspar, these mineral phases can be seperated very easily by the elutriation method. 3) It was supposed that the black colored clay involved a certain clay-organic complexs by the mechanism of intercalation as well as surface absorption. 4) The clay-organic complexes in clay seemed to improve dispersity, to increase the fluidity of clay-water slips, to decrease the firing shrinkage and to promote the thermo-chemical reaction at temperature range up to 50$0^{\circ}C$, but not to effect on the resulted firing color.