• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.567-575
• /
• 2001

This paper suggests new method to get fixed size parameter from different length of voice signals. The efficiency of speech recognizer is determined by how to compare the similarity(distance of each pattern) of the parameter from voice signal. But the variation of voice signal and the difference of speech speed make it difficult to extract the fixed size parameter from the voice signal. The method suggested in this paper is to normalize the parameter at fixed size by using the 2 dimension DCT(Discrete Cosine Transform) after representing the parameter by spectrogram. To prove validity of the suggested method, parameter extracted from 32 auditory filter-bank(it estimates auditory nerve firing probabilities) is used for the input of neural network after being processed by 2 dimension DCT. And to compare with conventional methods, we used one of conventional methods which solve time alignment problem. The result shows more efficient performance and faster recognition speed in the speaker dependent and independent isolated word recognition than conventional method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.87-90
• /
• 2002

$LiCoO_{2}$ powders were synthesized at various temperatures using lithium hydroxide and cobalt hydroxide as precursors prepared by precipitation process and freeze-drying. In this study, the$LiCoO_{2}$ samples were synthesized via a solid state reaction with various LiOH concentration between 10 % and 30 % excess. And $LiCoO_{2}$powders were calcined at 600~$800^{\circ}C$ in a short time. Measurements of XRD and SEM were performed to characterize the properties of the prepared materials. The effect of amount of Li ions on the structural change in powder has been examined using the XRD analysis. For the not added excess of LiOH, CoOOH phase presented in the XRD pattern of $LiCoO_{2}$ due to loss of Li ions during firing. The morphology and particle size of the powders were examined using SEM. The obtained powders are high temperature-$LiCoO_{2}$HT-LiCoO$_{2}$) and homogeneous with the range of grain size in the order of hundreds of nanometers. The effects of variation of LiOH concentration on the structural change in powder were investigated using the Rietveld analysis. As an analysis result, c/a is constant by 4.99 on all occasions. Finally, the structure of HT-$LiCoO_{2}$ was simulated by the commercial software $Creius^{2}$(Molecular Simulations, Inc.) from the results of Rietveld analysis.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.3
• /
• pp.143-147
• /
• 2002

Granule cells in dentate gyrus of hippocampus relay information from entorhinal cortex via perforant fiber to pyramidal cells in CA3 region. Their electrical activities are known to be closely associated with seizure activity as well as memory acquisition. Since action potential is a stereotypic phenomena which is based on all-or-none principle of $Na^+$ current, the neuronal firing pattern is mostly dependent on afterpotentials which follows the stereotypic $Na^+$ spike. Granule cells in dentate gyrus show afterdepolarization (ADP), while interneurons in dentate gyrus have afterhyperpolarizaton. In the present study, we investigated the ionic mechanism of afterdepolarization in hippocampal dentate granule cell. Action potential of dentate granule cells showed afterdepolarization, which was characterized by a sharp notch followed by a depolarizing hump starting at about $-49.04{\pm}1.69\;mV\;(n=43,\;mean{\pm}SD)$ and lasting $3{\sim}7$ ms. Increase of extracellular $Ca^{2+}$ from 2 mM to 10 mM significantly enhanced the ADP both in amplitude and in duration. A $K^+$ channel blocker, 4-aminopyridine (4-AP, 2 mM), enhanced the ADP and often induced burst firings. These effects of 10 mM $Ca^{2+}$ and 4-AP were additive. On the contrary, the ADP was significantly suppressed by removal of external $Ca^{2+},$ even in the presence of 4-AP (2 mM). A $Na^+$ channel blocker, TTX (100 nM), did not affect the ADP. From these results, it is concluded that the extracellular $Ca^{2+}$ influx contributes to the generation of ADP in granule cells.

• The Korean Journal of Pharmacology
• /
• v.19 no.1
• /
• pp.77-84
• /
• 1983

The behavioral pattern of an animal is influenced by endogenous and endogenous stimuli such as humoral secretion, neurohumoral transmitters, drugs, light and environmental change. It has teen known that adenosine is a normal constituent of brain, and has sedative or hypnotic effects and anticonvulsant effects, inhibiting the spontaneous firing of cells in the brain via membrane adenosine receptors. Recent studies suggest that the excitatory responses to xanthines in the CNS might be related to the competitive antagonism of xanthines to adenosine. This study was undertaken to Investigate the effects of adenosine and the CNS stimulants such as picrotoxin, strychnine and caffeine on the spontaneous activity of mire, and to examine the influence of adenosine on the seizures induced by large doses of CNS stimulants. Subjects were $20{\sim}30\;g$ adult mice, and the spontaneous activity was measured using the Selective Activity Meter after intraperitoneal injection of adenosine (10 mg/kg), caffeine (100 mg/kg), strychnine(0.2 mg/kg) or picrotoxin(0.5 mg/kg) with or without adenosine pretreatment. The seizures were induced with caffeine(200, 250 and 300 mg/kg), strychnine(1.25 and 1.5 mg/kg) or picrotoxin(10 and 15 mg/kg). The results are summarized as follows : 1) The spontaneous activity in mite was significantly inhibited between 10 and 20 minutes after adenosine treatment. 2) Caffeine and picrotoxin increased the motor activity significantly while strychnine had no effect on the activity. 3) The ambulatory activity in the caffeine, strychnine and picrotoxin treated groups was significantly inhibited by adenosine pretreatment. 4) The seizures were observed with caffeine(200, 250 and 300 m9/kg), strychnine(1.25 and 1.5 mg/kg) or picrotoxin(10 and 15 mg/kg). The caffeine induced seizures were inhibited by adenosine pretreatment, but the strychnine or picrotoxin induced seizures were not affected.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.275-282
• /
• 2000

Substantia nigra is known to highly express glibenclamide binding site, a protein associated to ATP-sensitive $K^{+}$ ($K_{ATP}$) channel in the brain. However, the functional expression of $K_{ATP}$ channels in the area is not yet known. In this work, we attempted to estimate the functional expression of $K_{ATP}$ channels in neurons of the substantia nigra pars compacta (SNC) in young rats using slice patch clamp technique. Membrane properties and whole cell currents attributable to $K_{ATP}$ channel were examined by the current and voltage clamp method, respectively. In SNC, two sub-populations of neurons were identified. Type I (rhythmic) neurons had low frequency rebound action potentials ($4.5{\pm}0.25Hz$, n=75) with rhythmic pattern. Type II (phasic) neurons were characterized by faster firing ($22.7{\pm}3.16Hz$, n=12). Both time constants and membrane capacitance in rhythmic neurons ($34.0{\pm}1.27$ ms, $270.0{\pm}11.83$ pF) and phasic neurons ($23.7{\pm}4.16$ ms, $184{\pm}35.2$ pF) were also significantly different. The current density of $K_{ATP}$ channels was $6.1{\pm}1.47$ pA/pF (2.44~15.43 pA/pF, n=8) at rhythmic neurons of young rats. Our data show that in SNC there are two types of neurons with different electrical properties and the density of $K_{ATP}$, channel of rhythmic neuron is about 600 channels per neuron.

• Journal of Korean Academy of Nursing
• /
• v.24 no.2
• /
• pp.313-318
• /
• 1994

To build a suitable National Health Care System for the coming 21s1 century, Nursing must also be renewed. The future Korea will be united and the majority of its population will raidly consist of the aged. Economically standing on the same level with developed countries the growth of scientific technologies will foster communications, firing astounding changes in the medical field. While the overall life style pattern of Koereans not to mention the structure of diseases undergo change, the possibility that the reckless induction of high-tech health care may only cause medical fees to eascafate. It can전so be expected that the health care system will evolve towards the consumers. Nursing in the 21s1 century will be of two scenarios according to WHO, which presents the role of the nurse. The first scenario is that "a gen-eric health care work force" namely a "care giver" will replace all other health professions. If Nursing does not become the compatent profession fitting to this purpose it will eventually dei out. The second scenario is that nurses who are educated in a well grounded and extensive general background and have command of a specialized area will undertake services varying from health pro-motion to treatment and rehabilitation both direct and indirectly, while supervising other personnel. The nurse here would become the "care giver". To become the necessary health care profession in the 21s1 century, nurses should be provided with more educational opportunities, variating in its con-tents, course, and system, enabling them to grow. Clair Faign points out that the minimal educational entry for the nursing profession is a 4 year undergraduate education in this aspect, now in the time to set the future of Nursing into the course of the first scenario. A new educational system stipulating a baccalaureate nursing degree is in urgent need, and aside from govermental actions nurse themseives should formaily officiallze this process, striving for quality assurance. While considering 6 years nursing education programs, multifarious degree courses for existing 3 years educated nurse should be provided Junior nursing schools must devise measures to grow into baccalaucate institutions, also. Among the existing courses, the Self Study Degree Program should be converted into RN, BSN courese provided by universities, and clinical training for the University on the Air must be supplimented, The possibility of establishing nursing courses into commercial high school programs only jeopardizes the development of the nursing profession.

• Journal of Conservation Science
• /
• v.6 no.1 s.7
• /
• pp.3-14
• /
• 1997

Twelve Punchong sherds collected in Hakbongni, Kongju where the well known iron-painted on white slip were manufactured from late 15C to early 16C were analyzed for their composition and microstructure. The composition of the body was analyzed by X-ray fluorescence and that of glaze by electron probe micro-analyzer. Microstructure was observed by optical microscope, polarizing microscope, EPMA, and X-ray diffractometer. The results of composition of body and glaze of Hakbongni were compared with those of Punchong from Yongsuri, Boryong which was close to Hakbongni. The composition of body and glaze of these two areas were compared by principal component analysis using SPSS program. Hakbongni bodies have higher silica and flux materials but lower alumina and their glaze have higher silica, soda, iron oxide but lower alumina, calcia. Hakbongni punchong itself is divided into two groups. Their glaze is lime type. There are many remnant minerals, such as quartz, large feldspar mass with partially melted surrounding area, albite, biotite, and iron-oxide. From such a microstructure we can assume that preparation of raw material was rather crude and firing temperature quite low. Iron-painted material is identified as Mg/Fe/Al spinel by composition analysis and XRD pattern.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.203-215
• /
• 2007

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.2
• /
• pp.61-78
• /
• 2008

Celadons painted in underglaze iron brown 'Sung(成)' inscription are characteristic celadons excavated only at the No. 7 kiln site located at Sadang-ri(沙堂里), Daegu-myeon(大口面), Gangjin-gun(康津郡), Jeollanamdo(全羅南道), Korea and has inscription in the inner center of the foot by brush. The inscription was marked where it is not easily seen. it can be assumed that since it showed a variety of hand writings, many people were involved in manufacturing these celadons and the 'Sung' inscription was marked after workshop rather than manufacturer. It was also found that quality of glaze, paste, shape, pattern and firing method were same and these were manufactured with the same techniques in the same period. Kinds of these celadons were mainly sets of tablewares including bowl with handle, bowl, plate, cup, bowl with cover and bottle. Raised relief designs using extrusion technic were especially preferred rather than incised designs and inlaid designs. Cases of using inlaid designs were not frequently found compared to incised designs, thus it can be assumed that in this period, inlaid designs were not generally used. Special designs having the meaning of authority or dignity such as chrysanthemum, peony, parrot and lotus plate designs were not found. Foot was molded with 'U' type except some bowls with cover and plates and firing was done after glazing the whole surface of the ceramic with the support of quartzite at 3 to 4 places of inner bottom of foot. Production period of these celadons with 'Sung' inscription can not be confirmed from other excavation sites outside of No. 7 kiln site at Sadang-ri since there are no other excavation sites whose relics bear 'Sung' inscription. Through comparison research with other relics bear the characteristics of these celadons from tombs, temple sites, shipwrecks, production period of these celadons with 'Sung' inscription can be assumed as second quarter of 13th century. And since the quality of these celadons are generally inferior to the top-quality celadons which were supplied to royal familes and high-ranking aristocrats, it can be deducted that these celadons with 'Sung' inscription were supplied to classes lower than royal familes and high-ranking aristocrats. So it is considered that Celadons with 'Sung' inscription have a great significance as a chronological material to complement the blank of the first half of the 13th century because most of celadons with raised relief designs and engraved relief designs were attributed to 12th century, the period of prosperity.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.3
• /
• pp.129-135
• /
• 2009

STATEMENT OF PROBLEM. Zirconia-based restorations have the common technical complication of delamination, or porcelain chipping, from the zirconia core. Thus the shear bond strength between the zirconia core and the veneering porcelain requires investigation in order to facilitate the material's clinical use. PURPOSE. The purpose of this study was to evaluate the bonding strength of the porcelain veneer to the zirconia core and to other various metal alloys (high noble metal alloy and base metal alloy). MATERIAL AND METHODS. 15 rectangular ($4\times4\times9mm$) specimens each of zirconia (Cercon), base metal alloy (Tillite), high noble metal alloy (Degudent H) were fabricated for the shear bond strength test. The veneering porcelain recommended by the manufacturer for each type of material was fired to the core in thickness of 3mm. After firing, the specimens were embedded in the PTFE mold, placed on a mounting jig, and subjected to shear force in a universal testing machine. Load was applied at a crosshead speed of 0.5mm/min until fracture. The average shear strength (MPa) was analyzed with the oneway ANOVA and the Tukey's test ($\alpha$= .05). The fractured specimens were examined using SEM and EDX to determine the failure pattern. RESULTS. The mean shear strength ($\pm\;SD$) in MPa was 25.43 ($\pm\;3.12$) in the zirconia group, 35.87 ($\pm\;4.23$) in the base metal group, 38.00 ($\pm\;5.23$) in the high noble metal group. The ANOVA showed a significant difference among groups, and the Tukey' s test presented a significant difference between the zirconia group and the metal group. Microscopic examination showed that the failure primarily occurred near the interface with the residual veneering porcelain remaining on the core. CONCLUSION. There was a significant difference between the metal ceramic and zirconia ceramic group in shear bond strength. There was no significant difference between the base metal alloy and the high noble metal alloy.