• Journal of Industrial Technology
• /
• v.3
• /
• pp.65-68
• /
• 1983

There are chief concerns every ceramist must keep in mind when firing a single kiln : Being able to read and control the kilns temperature as the firing progresses and as the kiln cools after firing. Controlling the atmosphere of the kiln in order to create desired glaze and clay body effects. Getting the most efficient use from the fuel-the most heat possible from the least fuel possible. The more exactly, author can control these factors with some result.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.261-267
• /
• 2008

One of the most important issues in fence-type PDP is low luminance and luminous efficiency. To improve luminance and luminous efficiency, new sustain electrode structure which contains long discharge gap is necessary. However, it causes rise of firing voltage. In this paper, a new fence electrode structure is proposed in order to solve these problems. To drop the firing voltage, tow hump shaped electrodes is added on the main discharge electrode, and distance between two humps is controlled. The experimental results show that the test panel with the narrow horizontal gap(40um) between two humps shows low firing voltage by 17V compared with 80um gap in spit of similar luminance and luminous efficiency.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.159-164
• /
• 2015

We manufacture artificial lightweight aggregates (ALWAs) using bottom-ash as the primary raw material. We coat the ALWA surfaces with low-melting point materials in order to enable them to bloat, which is essential to reduce the bulk density of the aggregate. Then, we sinter the prepared aggregates at 1000, 1100, and $1200^{\circ}C$ using either the direct or two-step firing schedules. Finally, we evaluate the properties of the fired samples through analyzing their bulk density, water absorption, and microstructure. The surface-modified samples result in a reduction of their bulk density by $0.3{\sim}0.4g/cm^3$ regardless of the firing method used. Based on these results, we conclude that this approach could provide a viable method for the mass-production of ALWAs from industrial waste such as bottom-ash.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.69-72
• /
• 2015

Computational fluid dynamics (CFD) modeling of large-scale coal-fired boilers requires a complicated set of flow, heat transfer and combustion process models based on different degrees of simplification. This study investigates the influence of coal devolatilization, char conversion and turbulent gas reaction models in CFD for a tangential-firing boiler at 500MWe capacity. Devolatilization model is found out not significant on the overall results, when the kinetic rates and the composition of volatiles were varied. In contrast, the turbulence mixing rate influenced significantly on the gas reaction rates, temperature, and heat transfer rate on the wall. The influence of char conversion by the unreacted core shrinking model (UCSM) and the 1st-order global rate model was not significant, but the unburned carbon concentration was predicted in details by the UCSM. Overall, the effects of the selected models were found similar with previous study for a wall-firing boiler.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.166-172
• /
• 1997

In order to find out relationship between hit probability and gun firing of a moving tank, a turret and flexible gun system model has been developed using the recursive flexible multibody dynamics. For a firing simulation model, nodal coordinates for a finite element model of a flexible gun have been employed to include traverse loads to the gun tube due to moving bullet and ballistic pressure. Modal coordinates are also used to represent the motion induced gun vibration before a firing occurs. An efficient switching technique from modal equations to nodal equations has been introduced for an entire gun firing simulation with rotating turret.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.82-88
• /
• 2020

The purpose of this study is to obtain basic data on the optimization of firing process conditions for enamel coating in chemical heat exchanger. The method of increasing the firing temperature in order to apply enamel coating to shell & tube type heat exchanger was examined. The temperature distribution of the heat exchanger in the firing kiln was numerically calculated using a commercial CFD program. The structural safety of the heat exchanger was confirmed by thermal stress analysis using the FSI method. Numerical analysis and experimental results show that there is a problem of safety due to temperature difference when the heat exchanger at room temperature is directly put into a firing kiln at 860℃. Therefore, a preheating process is need to reduce the temperature difference. As in Case2 with fewer firing steps, the first stage preheating temperature of 445℃and the second stage firing temperature of 860 ℃are considered to be most suitable.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.329-334
• /
• 2013

Order spectrum analysis is widely used to grasp the features of noises due to powertrain system including engine and intake/exhaust system. It is known from many previous researches that order components related to the first and second firing frequencies of engine considerably affect the noise of car interior. The purpose of this paper is to find out the difference in sound quality: Pleasantness of car interior noise according to the change of its order spectrum. For this, car interior noises of 6-cylinder and 4-cylinder engines are recorded and their order spectrum levels are modified by applying adaptive digital filters. After subjective listening test employing paired comparison method is conducted, it is investigated that the level change of half-order components is a noticeable factor to improve Pleasantness of the car interior noises whereas level decrease of firing order does not always give the positive effect on its sound quality.

• Journal of Oral Medicine and Pain
• /
• v.24 no.4
• /
• pp.421-437
• /
• 1999

This study was performed to investigate the electromyographic(EMG) activity, firing time and sequence of the mandibular elevator muscle on gum chewing. For this study, 28 patients with temporomandibular disorders(TMD), especially internal derangement of TM joint, and 16 dental students without any signs and symptoms in the masticatory system were selected as the patients group and as the normal group, respectively. The patients group was composed of 14 right and 14 left side affected patients. For recording of EMG activity(${\mu}V$) of the anterior temporalis(TA) and the masseter muscle(MM), and measuring of firing time(millisecond) from the start of mandibular opening movement to the firing of the muscles, BioEMG, BioEGN, and Combo program integrated in the Biopak system(Bioresearch Inc., Milwaukee, USA) were used. Gum chewing stroke was performed in both right and left side for several times, and the first and the second chewing strokes were analysed and compared with regard to EMG activity, firing time, firing sequence, correlation between EMG activity and firing time. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In the patients group, chewing on the affected side showed higher EMG activities in the masseter of the side than those of the contralateral side, but chewing on the unaffected side showed higher EMG activity in the masseter and in the anterior temporalis of the side than those of the contralateral side. 2. There were no difference of firing time between both sides on chewing on the affected side, but firing time in the chewing side were earlier than that of contralateral side on chewing on the unaffected side in patients group. 3. In the normal group, EMG activities in the masseter and in the anterior temporalis in the chewing side were always higher than those of the contralateral side, and there were no difference of firing time between the two sides. 4. In general, firing sequence of four muscles of both sides were ipsilateral TA, ipsilateral MM, contralateral TA, and contralateral MM in earlier order of time in both groups. Correlation coefficients between EMG activity and firing time were negative value, and more significant correlation were appeared in the normal group than in the patients group.

• Korean Journal of Dental Materials
• /
• v.42 no.2
• /
• pp.95-106
• /
• 2015

Hardening mechanism associated with post-firing heat treatment of softening heat treated and then firing simulated Pd-Ag-Au alloy for bonding porcelain was examined by observing the change in hardness, crystal structure and microstructure. By post-firing heat treatment of as-cast, solution treated and pre-firing heat treated specimens at $650^{\circ}C$ after casting, the hardness value increased within 10 minutes. Then, hardness consistently increased until 30 minutes, and gap of hardness value among the specimens was reduced. The increase in hardness after post-firing heat treatment was caused by grain interior precipitation in the matrix. The softening heat treatment did not affect the increase in hardness by post-firing heat treatment. The precipitated phase from the parent Pd-Ag-Au-rich ${\alpha}$ phase with face-centered cubic structure by post-firing heat treatment was $Pd_3$(Sn, In) phase with face-centered tetragonal structure, which has lattice parameters of $a_{200}=4.0907{\AA}$, $c_{002}=3.745{\AA}$. From above results, appropriate post-firing heat treatment in order to support the hardness of Pd-Ag-Au metal substructure was expected to bring positive effects to durability of the prosthesis.

• Journal of the military operations research society of Korea
• /
• v.36 no.2
• /
• pp.11-24
• /
• 2010

Quick precision-strike capability of the artillery will be an important factor in modern and future war and it's represented by NCW and EBO. This study is based on artillery which has time limitation of firing, such as artillery which hides when not firing, and modeling various situations to decide firing order and who to shoot. The main purpose of this study is to suggest a mathematical programming model and a genetic algorithm which satisfies the limitation of firing time. The objective function is to minimize the total firing time to spend. The results of the suggested algorithm quickly gives a best solution for a large scale field artillery targeting problems.