• 제목/요약/키워드: Fire response system

검색결과 253건 처리시간 0.026초

목조 문화재 건축물의 화재로 인한 초기 대응 능력에 관한 조사 연구 (A Study on the Methods of Initial Response Wooden Cultural Asset Architecture by Fire)

  • 이성우
    • 한국콘텐츠학회논문지
    • /
    • 제19권9호
    • /
    • pp.112-121
    • /
    • 2019
  • 목조로 된 문화재 건축물들은 국가 또는 지방 자치에서 관리하는 관리의 권원이 분리되어 있으며 국보급 등 많은 문화재 건축물들이 화재로 인한 소실 우려가 높다. 본 연구는 우리나라 국보급 등 정부와 각 시도에서 관리하는 목조 문화재의 현황을 파악해서 방재측면에서 설치되어 있는 주요 설비 효용성과 화재 시 초기 진압과 소방차의 출동으로 인한 문제점 등을 심층적으로 파악을 하였다. 또한, 관련 법령에 의한 소화설비들의 설치 및 유지관리가 현실에 맞도록 제도 개선을 위하여 관계인에게 심층 개별 면담을 통하여 문제점을 도출하였다. 그 결과 주변이 산으로 둘러싸여 있거나 부속 건물들이 인접해 있어 이에 알맞은 방재 대책을 세워 시설을 유지관리 함으로써 화재 등 재난으로부터 보호 할 수 있는 긍정적인 측면에 도달하였다. 목조 문화재의 대부분은 단독 건물에 면적이 작고 단층이기 때문에 소방법상 소방시설 설치규정에 제외되는 경우가 많다. 최선의 방법으로는 화재 발생전 안전관리 대책 등 화재 대응 매뉴얼을 작성하여 매뉴얼에 따라 자체적으로 소화 능력을 갖추는 것이 최선의 방법이다. 향후, 국가의 중요 문화재 건물에 대하여 화재로 소실되기 전 예방을 위한 국가적 차원에서 관리 전문기관이 설립 또는 지정되어 보호할 수 있도록 실질적 고려를 위한 후속 연구로 제언하고자 한다.

반도체 스위칭 소자를 이용한 고속 고정밀의 전기화재 방재장치 (A Electrical Fire Disaster Prevention Device of High Speed and High Precision by using Semiconductor Switching Devices)

  • 곽동걸
    • 전력전자학회논문지
    • /
    • 제14권5호
    • /
    • pp.423-430
    • /
    • 2009
  • 최근 저압 배전계통에서 사용되고 있는 과부하겸용 누전차단기 즉, RCD의 저조한 응답특성으로 인한 전기화재 원인의 대부분을 차지하는 단락사고 및 과부하사고에 대한 대응이 매우 미흡한 실정이다. 이에 본 논문에서는 기존 RCD에 대한 모의 사고실험을 통하여 그 비신뢰성을 확인하고, 이러한 RCD의 단점을 개선하고자 내구성과 속응성이 우수한 반도체 스위칭 소자들과 고정밀 전류센서를 이용한 "전기화재 방재장치(EFDPD : Electrical Fire Disaster Prevention Device)"를 제안하여 저압 배전계통에서의 단락 및 과부하사고로 인한 전기재해를 방지하고자 한다. 제안한 장치의 고정밀 전류센서로 사용된 리드스위치는 각종 전기사고에서 수반되는 단락전류 및 과전류에 의한 배전선로의 상승된 자속을 정밀 감지한 후, 자체 차단장치를 동작시키는 원리를 가진다. 다양한 동작특성 분석을 통하여 기존의 차단기와 비교하여 차단동작 응답속도와 그 신뢰성이 입증된다. 이로써 제안한 전기안전 제어장치는 기존 RCD들의 빈번한 오동작과 비신뢰성, 저조한 응답특성으로 인한 각종 전기사고 및 전기화재의 발생을 방지하고자 한다.

도로터널용 원격 자동소화 설비의 test bed 적용을 통한 실용화 방안 연구 (A study on practical use of remote automatic fire extinguishing equipment through test bed in road tunnel)

  • 박상헌;안승주;김재훈;김경수;윤준수;유용호
    • 한국터널지하공간학회 논문집
    • /
    • 제21권6호
    • /
    • pp.837-847
    • /
    • 2019
  • 국내 장대 지하도로는 선진화 교통망 구현을 위해 대도시를 중심으로 추진되고 있다. 폐합되고 장대화된 지하도로의 화재안전성 확보를 위해 많은 방재시설이 적용되며, 1등급 터널에서는 물분무 설비를 이용하여 초기 화재 진압을 위한 설비로 적용되지만 2~4등급 터널에서는 초기 화재진압을 위한 방재시설 대응 및 화재진압 주체가 불분명하여 화재확산에 따른 추가적인 인적/물적 피해가 불가피하다. 따라서 본 연구에서는 1등급 물분무 설비와 같이 초기화재 진압이 가능하도록 옥내소화전 소화용수를 이용하여 관리실에서 CCTV로 모니터링 하고 자동 제어를 통하여 화재지점에 직접 분사하는 원격 자동소화설비 시스템을 개발하였으며, Test Bed를 통하여 실용화를 위한 통하여 성능개선방안을 연구하였다.

재난관리 공무원의 재난대응훈련에 관한 인식 연구 - 일반 행정직공무원과 소방공무원을 중심으로 - (A Study on Disaster Management Officer's Perception about the Disaster Response Exercise - Focused on General Officers and Firemen -)

  • 고기봉;이시영;채진
    • 한국화재소방학회논문지
    • /
    • 제24권6호
    • /
    • pp.34-44
    • /
    • 2010
  • 본 연구논문은 지방자치단체에서 재난관리에 관한 총괄 조정업무를 담당하고 있는 일반 행정직공무원과 긴급구조업무를 담당하고 있는 소방공무원을 대상으로 설문조사를 실시하여 재난대응훈련에 관한 인식을 조사하였다. 설문조사결과 두 직렬공무원 모두 재난대응훈련에 동원되는 장비 및 훈련에 필요한 예산의 확보, 유관기관 사이의 네트워크 구축, 실제상황 및 지역특성의 반영, 훈련평가결과는 재난대응매뉴얼 및 다음 훈련에 반영, 훈련에 필요한 지휘통신 시스템의 확보 등이 필요한 것으로 나타났다.

해외 재난 안전관리 시스템 사례기반 산불재난대응 연구 (A Study on Wildfire Disaster Response based on Cases of International Disaster Safety Management Systems)

  • 이지현;박민수;정대교;박승희
    • 대한토목학회논문집
    • /
    • 제40권3호
    • /
    • pp.345-352
    • /
    • 2020
  • 산불재난은 위험요소에 대한 경우의 수가 많고, 범위가 넓으며 파생되는 피해 다양성도 나날이 늘어나고 있다. 산불재난에 대응하기 위해 다양한 연구 및 시스템이 생겨나고 있다. 국외 산불재난 대응 시스템은 빅데이터, GIS 기반 시스템, 의사결정 시스템 등 다양한 기술을 적용하였다. 산불재난대응 체계 및 시스템에 대해, 국내외 사례를 비교 분석하였다. 또한, 이에 대한 국내 산불재난 대응 시스템 대안방안을 제시하였다. 첫째, 국내 각 기관에서 파악한 정보 및 현장 정보를 통합하는 방향을 제안한다. 둘째, 재난대응 시스템에 빅데이터를 적용하는 방안을 제안한다. 셋째, 기존에 GIS 기반 시스템에 의사결정 시스템을 적용한다. 따라서 본 논문에서는 위의 대응방안으로 기존 재난 안전 관리체계에 제안했을 때, 다양한 정보 및 데이터를 가시화하여 쉽게 파악할 수 있다. 또한, 가시화 플랫폼으로 의사결정을 도와줄 수 있으며 최적의 결과로 최소한의 피해를 기대할 수 있다.

소방시설관리업 종사자의 직무스트레스가 직무만족에 미치는 영향 (Effects of Task Stress on the Job Satisfaction of Fire Protection Management Workers)

  • 임경연;공하성
    • 한국화재소방학회논문지
    • /
    • 제33권5호
    • /
    • pp.130-139
    • /
    • 2019
  • 이 연구는 소방시설관리업 종사자의 직무스트레스 수준과 정도를 확인하였으며, 또한 직무스트레스가 직무만족에 미치는 영향을 분석하고 향후 연구과제를 제안하였다. 첫째, 배경원인에 따른 직무스트레스는 연령, 직급, 월 급여, 총 경력, 자격증, 담당업무는 차이가 나타났으며, 학력에서는 차이가 없음을 알 수 있었다. 둘째, 직무스트레스와 직무만족의 영향을 살펴본 결과 스트레스의 하위 변수 중 물리환경, 직무요구, 조직체계, 보상부적절, 직장문화는 스트레스가 증가함에 따라 직무만족에 부(-)의 영향을 미친 반면에 관계갈등, 직무불안정은 영향을 미치지 않음을 알 수 있었다. 향후, 업무 과부하의 실증적 원인 규명 연구와 소방시설관리업 조직차원의 스트레스 경감대책에 대한 연구가 필요하다.

The effects of work environment monitoring organization's analysts' equipment and chemical substance incident response to the safety management awareness

  • Park, Hyun-A;Choi, Seo-Yeon;Rie, Dong-Ho
    • 한국컴퓨터정보학회논문지
    • /
    • 제22권5호
    • /
    • pp.97-103
    • /
    • 2017
  • In this paper, we propose a method to investigate the safety consciousness of a analyst incident response. This study conducted a statistical survey on 154 analysts who hired as expert in environment monitoring organizations in South Korea. The results of the analyses showed that respondents had good awareness on the equipment incident response and complied with laboratory safety regulations very well. Secondly, respondents were aware of the importance in the order of equipment incident response, an analytical laboratory incident response, and the cause of a chemical substance associated incident in an analytical laboratory in regarding the regulation compliance for creating a safe laboratory environment and the securement of laboratory safety. Therefore, (it was identified that) it would be necessary to create a safe environment and integrate a safety management system.

비상재난 발생 시 외부 VHF 장비와 연동하는 소형선박용 재난자동속보장치 (Automatic Distress Notification System Working with an External VHF Device in Small Ship)

  • 정헌
    • 한국화재소방학회논문지
    • /
    • 제27권1호
    • /
    • pp.14-19
    • /
    • 2013
  • 본 논문은 소형 선박의 비상재난 발생 시 외부 VHF 장비와 연동하여 재난 상황을 자동으로 속보하는 기능을 수행하는 소형 선박용 재난자동속보장치에 대한 내용이다. 재난자동속보장치는 소형 선박의 재난 발생을 방지 또는 신속 대응하기 위한 시스템인 소형 선박재난분석시스템의 일부 장치에 해당하는 것으로서 선박재난분석시스템으로부터 재난 인지 신호와 GPS 위치 정보를 입력 받는다. 비상 상황 발생 시 위치 정보를 구조 요청의 음성 신호로 변환하여 외부 VHF 장비를 통해 송출한다. VHF 장비와 재난자동속보장치가 물에 잠기기 전까지 계속적인 음성 구조 신호를 송출할 수 있도록 한다. 본 연구를 통해 소형선박에 발생할 수 있는 갑작스런 재난상황의 대응과 인명손실을 예방할 수 있으리라 기대한다.

차동식 열감지기 설치기준 비교분석에 관한 연구 (Differential temperature fire detector analysis of comparative study based on sensor installation)

  • 황동환;양광모;강경식
    • 대한안전경영과학회지
    • /
    • 제16권4호
    • /
    • pp.379-389
    • /
    • 2014
  • Fire detectors are designed to minimize loss of life from a fire alarm system as an alarm to help evacuate more quickly until the completion of the evacuation alarm should be continued. the purpose of such alarms in order to achieve the characteristic fire heat release rate reaches a certain level, or when a certain time has elapsed, when the heat detector is to be alarms to answer. Requires a quick response, it is desirable to install the sensor as much as possible, but taking into account the cost of installation problems by engineering approach to minimize the quantity and rapidity of detection capability should be increased. In order to increase the rapidity of fire detectors in a room according to the height of the sensing period is to be maintained the optimum distance of the fire detector detects characteristics should be considered. Differential spot-type heat detectors installed domestic basis, depending on the type of sensor that can detect one sensor area is limited and less than 4m ceiling height regulations and simply double the number in excess of 4m and intended to be installed.

국내 제조업 화재감시자 운영 실태 분석 - 개정 산업안전보건법 중심 (Analysis of the Operation of Fire Observers in the Domestic Manufacturing Industry - Focusing on the Revised Occupational Safety and Health Act)

  • 김경민;서용윤;이종빈;장성록
    • 한국안전학회지
    • /
    • 제38권3호
    • /
    • pp.77-84
    • /
    • 2023
  • Welding and cutting, which are representative tasks in handling firearms at industrial sites, are the basis for production and maintenance processes across all industries. They are also essential in the root industry. Specifically, they are widely used in the manufacturing industry, including equipment industries such as shipbuilding, automobiles, and chemicals, and subsequent maintenance work and general facility repair. However, such hot work carries a high fire risk owing to sparks scattering and inadequate management, resulting in a high occurrence of accidents. In response, the government and relevant organizations have recently revised the Occupational Safety and Health Act to prevent accidents during hot work. These revisions impose more stringent regulations than before, which are expected to help prevent actual fire accidents. However, whether the fire observer system, which is the core element of the revision, would be practically applied and maintained is unclear. Therefore, this study compared the fire observer system in the revised Occupational Safety and Health Act with those in the laws and systems of developed countries, conducted interviews with safety and health experts to assess the suitability of the new system for fire observer operations, and improvement plans were derived accordingly. Therefore, the laws and systems of developed countries grant more authority to fire observers compared with those of Korea. Moreover, professional training in handling emergency is required. Interviews with safety and health experts revealed that regardless of company size, the same operating standards were applied, and standards for deploying fire observers in various locations were unclear. Furthermore, there was a lack of professional education and training, and the role and authority of fire observers were limited. These findings revealed a problem in this sector. The results of this study are expected to serve as basic data for establishing a practical system for placing fire observers and supplementing laws, guidelines, and systems for preventing fire accidents.