• 한국가구학회지
• /
• 제24권4호
• /
• pp.426-432
• /
• 2013

Fire resistance and impact sound insulation tests were performed for a floor assembly, of which stiffness was reinforced by shortening the span of floor joists by installing glulam beam additionally in the middle or one thirds of the original span, and which an additional ceiling component was installed apart from floor structure. By applying the isolated ceiling, timber framed floor showed 1 hour of fire resistance even in case that dead load was increased by considering cement mortar layer for radiant floor heating. Insulation performance against light and heavy impact sound was improved significantly by applying the sound absorbing layer of big mass and high elasticity in addition to the stiffness improvement and isolated ceiling.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.119-120
• /
• 2016

This study is about development of inorganic insulation material using by-product materials. The organic material is due to toxic gas emission, when a fire occurs. And it has lower water resistance. The inorganic material is heavy and worse thermal performance than organic materials. In this study, installed light weight ceramic insulation by concrete structure to evaluation fire resistance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.119-120
• /
• 2020

Recently, a building fire has occurred due to various influences. Accordingly, we are developing an public safety & security unmanned aerial vehicle for fire prevention and initial response to fire. The public safety & security unmanned aerial vehicle is used to grasp the traffic route to enter the fire engine in the event of a fire in a dense structure and to determine the scale of the fire and the area of danger of collapse around the fire site. In this study, an environmental test of the public safety & security unmanned aerial vehicle's heat resistance was performed in an environment simulating a fire scene.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2013년도 추계학술대회 초록집
• /
• pp.153-154
• /
• 2013

내화구조로 인정을 받은 국내의 철골조 기둥의 경우 대다수가 H형강에 내화제품을 피복한 구조이다. 본 연구에서는 한국산업표준에서 제시하고 있는 단면형상계수를 기준으로 H형강 인정구조와 다양한 단면의 내화구조의 비교실험을 통해 국내 인정제도를 개선하기 위한 자료로 활용하고자 하였다.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.115-123
• /
• 2022

최근 10년간 주거시설에서 발생한 화재 중 공동주택이 약 40%를 차지하고 있다. 공동주택에서 화재 확산 방지와 피난을 위해 방화문의 내화성능과 성능설계가 중요해지고 있다. 본 연구는 화재성능시험을 통과한 2016년부터 2020년까지 품질검사보고서 395건의 DB를 구축하고 방화문의 구조(12개 요소)를 분석을 통하여 방화문 성능영향인자를 도출하였다. 결과로서, 287건의 합격사례에서 내화충진재와 밀도, 접착제, 발포제의 영향을 확인하였다. 한편, 불합격 사례 108건에서 화염발생과 틈새발생이 방화문 내화시험에서 가장 큰 불합격 요소임을 확인하였다. 방화문은 내화성능 불합격을 방지하기 위하여 복합자재들로 구성이 되어 있으며, 구성 요소들의 위치 등 형태를 정형화하여 일률적인 품질관리가 필요하다. 본 연구의 DB 분석 결과를 바탕으로 공동주택의 대피공간문 및 공용부 방화문에 대하여도 추가적인 비교분석이 필요하다.

• Steel and Composite Structures
• /
• 재36권6호
• /
• pp.657-669
• /
• 2020

This study investigates the fire resistance characteristics of reactive powder concrete according to changes in the cement content per unit area, mixing ratio of metakaolin (MK), and content of polypropylene fiber. A fire test was conducted, and the resulting residual strength characteristics were investigated through flexural and compressive strength measurements, as well as condition rating classification based on visual evaluation. MK effectively reduced the initial high content of calcium hydroxide, thereby reducing the water vapor pressure generated during pyrolysis and slowing spalling. Furthermore, the pore structure and loose tissue were effective for relieving the water vapor pressure in the event of a fire.

• Advances in concrete construction
• /
• 제1권1호
• /
• pp.29-44
• /
• 2013

Post earthquake fire (PEF) can lead to the collapse of buildings that are partially damaged in a prior ground-motion that occurred immediately before the fire. The majority of standards and codes for the design of structures against earthquake ignore the possibility of PEF and thus buildings designed with those codes could be too weak when subjected to a fire after an earthquake. An investigation based on sequential analysis inspired by FEMA356 is performed here on the Life-Safety performance level of structures designed to the ACI 318-08 code after they are subjected to two different earthquake levels with PGA of 0.35 g and 0.25 g. This is followed by a four-hour fire analysis of the weakened structure, from which the time it takes for the weakened structure to collapse is calculated. As a benchmark, the fire analysis is also performed for undamaged structure and before occurrence of earthquake. The results show that the vulnerability of structures increases dramatically when a previously damaged structure is exposed to PEF. The results also show the damaging effects of post earthquake fire are exacerbated when initiated from second and third floor. Whilst the investigation is for a certain class of structures (regular building, intermediate reinforced structure, 3 stories), the results confirm the need for the incorporation of post earthquake fire in the process of analysis and design and provides some quantitative measures on the level of associated effects.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.78-84
• /
• 2012

본 연구는 100 MPa급 고강도 콘크리트 기둥에 대하여 횡구속력 보강 및 내화보강 공법 적용 유무에 따른 내화성능을 평가하기 위하여 표준화재 재하조건에서 내화실험을 실시하였다. 실험결과, 띠철근을 적용한 실험체의 경우 43분의 내화성능을 만족하여 내화구조로써 적용할 수 없는 것으로 나타났으며, 동일체적비로 띠철근을 대체한 와이어로프를 적용할 경우 별도의 내화처리 없이 69분의 내화성능을 만족하여 4층 이하 건물에 적용할 수 있는 것으로 나타났다. 또한 띠철근을 대체한 와이어로프 및 폭렬방지를 위한 Fiber-Cocktail 혼입공법을 혼합 적용 할 경우 180분의 내화성능을 만족하여 12층 초과 건물에 적용할 수 있는 것으로 나타났다.

• 한국터널지하공간학회 논문집
• /
• 제25권2호
• /
• pp.121-139
• /
• 2023

도로, 지하철, 철도 등의 다양한 터널이 건설 및 운행 중에 있다. 터널구조물의 구조적 안정을 위해 다양한 형태의 라이닝이 이용되고 있으며 특히 TBM터널 공사에서는 콘크리트 세그먼트 라이닝이 주로 설치되고 있다. 본 논문에서는 터널 내 화재가 발생할 시 터널내 구조물인 콘크리트 세그먼트 라이닝에 미치는 영향 및 관련기준, 내화성 평가 및 내화방법에 대해서 문헌조사를 통해 조사하고 관련내용을 제시하였다. 이를 통해 실무자가 터널화재에 대한 콘크리트 세그먼트 라이닝의 안전을 확보하는데 정보를 제공하고자 하였다.