• 한국가스학회지
• /
• 제20권5호
• /
• pp.89-95
• /
• 2016

가스 배관을 공동구 내에 수용하는 것은 단순 매설하는 것보다 부식의 위험이 적고, 외부인의 출입이나 굴착공사 등으로부터 오는 물리적 손상을 예방할 수 있다는 점에서 편의성이 크다. 그러나 밀폐된 공간이라는 특성상 개방된 공간에서의 폭발보다 폭발 과압에 의한 피해가 크다. 그럼에도 공동구에 대한 연구는 화재 사고에 국한되어 진행되었고, 폭발로 인한 위험성에 관한 연구가 부족한 실정이다. 본 연구는 지하 공동구 내부의 가스배관으로부터 누출된 메탄가스가 원인모를 점화원에 의해 폭발을 일으켰을 경우를 가정하여 피해결과 관점에서 공동구 내부의 폭발이 상부 시설물에 미치는 영향을 살펴보았다. 안전설비의 작동상태에 따른 2가지의 시나리오를 선정하여 CFD tool인 FLACS를 사용하여 영향성 평가를 진행한 결과 대부분의 건축물을 전파 시킬 수 있을 정도의 폭발 과압이 예측되었다. 이 결과를 활용하여서 사고 발생 빈도를 감소시켜 안전성을 확보할 수 있는 추가 대책을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.92-94
• /
• 2003

The autotransformer currently used on the electric railway system is made of class A insulation material and uses the paper insulation method. As a power converter supplying power to the trolley wire, the autotransformer is one of critical equipment in the railway system. In the autotransformer, load irregularly changes and overload often occurs. These cause overheating of the autotransformer and facilitate deterioration of the autotransformer resulting in burnout accidents due to insulation breakdown. Also, the current autotransformer has poor insolation and short-circuit strength which often badly affect the service life of the transformer, and needs to improve its quality urgently. To overcome one of existing shortcomings of the mold transformer, manufacturers use epoxy resins that have superior flame retardancy to get rid of fro and explosion possibilities during accidents. Currently, new mold transformers are used in indoor distribution facilities with fire-fighting equipments. Coils molded in epoxy resins do not have their insulation performance compromised by humidity, dust, etc enabling easy inspection and maintenance. Comparing to the oil immersed transformer, the mold transformer does not have any concern about environmental pollutions by oil leak or replacement Therefore, to reduce breakdowns and improve reliability of the autotransformer, it is necessary to develop a new mold autotransformer with low loss suitable for our environment to suppress breakdowns of the autotransformer and improve the reliability. This study is about development of a low-loss mold autotransformer necessitated by reasons mentioned earlier.

• 한국수소및신에너지학회논문집
• /
• 제25권6호
• /
• pp.609-619
• /
• 2014

In the present study, the frequency of the undesired accident was estimated for a quantitative risk assessment of a large-scale hydrogen liquefaction plant. As a representative example, the hydrogen liquefaction plant located in Ingolstadt, Germany was chosen. From the analysis of the liquefaction process and operating conditions, it was found that a $LH_2$ storage tank was one of the most dangerous facilities. Based on the accident scenarios, frequencies of possible accidents were quantitatively evaluated by using both fault tree analysis and event tree analysis. The overall expected frequency of the loss containment of hydrogen from the $LH_2$ storage tank was $6.83{\times}10^{-1}$times/yr (once per 1.5 years). It showed that only 0.1% of the hydrogen release from the $LH_2$ storage tank occurred instantaneously. Also, the incident outcome frequencies were calculated by multiplying the expected frequencies with the conditional probabilities resulting from the event tree diagram for hydrogen release. The results showed that most of the incident outcomes were dominated by fire, which was 71.8% of the entire accident outcome. The rest of the accident (about 27.7%) might have no effect to the population.

• 센서학회지
• /
• 제23권4호
• /
• pp.266-271
• /
• 2014

Chemical sensors are used in various industrial facilities such high-risk and prevent the leakage of substances, important in life and environmental protection and the safe use of industry, used for management. In particular, high-temperature environments such as power generation equipment of the rotating part due to leakage generated by the various oil, power plants Shut Down, fire, work environment (exposure to various chemical solution and gas leak) and various water, air and soil pollution causes. Thus, over the long term through various channels such as crops and groundwater contamination caused by the slow, serious adverse effect on the ecosystem. In this paper, synthetic lube oil and high pressure hydraulic fluid leakage and immediately detect a new Printed Electronic implementation of technology-based film-type sensors, and its performance test. Thus, industrial accidents and environmental pollution and for early detection of problems, large accidents can be prevented. Experimental results of the synthetic lube oil and high pressure hydraulic fluid solution after the contact time depending on the experiment and the oil solution of the sensor material of the conductive porous PE resistance value by a chemical reaction could be confirmed that rapid increase. Also implemented in the film-type oil sensor electrical resistance change over time of the reaction rate and the synthetic lube oil is about 2 minutes or less, the high pressure hydraulic fluid is less than about 1 minute was. Therefore, more high-pressure hydraulic fluid such as a low volatility synthetic lube oils are the resistance change and the reaction rate was confirmed to be the slowest.

• 한국측량학회지
• /
• 제27권1호
• /
• pp.701-711
• /
• 2009

건물의 형태가 고층화되고 대규모의 복합공간을 이루게 되면서 건물의 실내공간은 더욱 복잡하고 다양한 활동들이 일어나는 공간으로 새롭게 인식되고 있기 때문에, 실내공간을 3차원으로 모델링하여 위치정보를 기반으로 다양한 분야에서 활용될 수 있도록 할 필요가 있다. 본 연구에서는 GIS 표준 웹서비스 기술과 3차원 시각화 기술을 화재 대피 시설물 관리 상권 분석과 같은 건물과 관련된 어플리케이션에 활용하여 효율적인 의사결정을 내릴 수 있도록 3차원 실내모델의 정보를 제공할 수 있도록 하였다. GIS 표준 웹 서비스를 활용하여 건물정보를 공유할 수 있도록 건물의 3차원 실내공간을 효율적으로 모델링하고 시각화하기 위한 방안을 제시하기 위해 실내모델의 다양한 구성요소들을 분할하여 모델링 된 공간데이터베이스의 지정된 데이터테이블에 저장하고, 각각을 GIS 웹 서버를 이용하여 웹서비스 할 수 있도록 설정하였다. 3차원 그래픽 렌더링 엔진을 이용하여 GIS 웹서비스로 전달되는 실내모델을 동적으로 재구성함으로써 효율적으로 3차원 시각화할 수 있는 모듈을 개발하여 다양한 어플리케이션에 활용할 수 있는 방안을 제시하였다.

• 전기학회논문지
• /
• 제62권5호
• /
• pp.643-648
• /
• 2013

In this study, degradation was observed by irradiating UV rays to the polymer insulators which have been widely used in outdoor electric power facilities. For an indoor accelerated UV test, 0.55 w/m2 of UV rays were applied using a xenon-arc method. A UV detection system with 65 ${\phi}mm$ in diameter, 100 mm in length and 1.0 of brightness (F/#) has been designed. Even though efflorescence on the surface of polymer insulators wasn't observed according to the accelerated UV test. UV rays were detected at around 50% and 40% of insulation breakdown in EPDM and silicone-type insulators respectively. As degradation continued because of an indoor accelerated UV test, breakdown voltage with which UV rays can be detected in an early stage decreased as well. A silicone polymer insulator would be severer than EPDM polymer insulator in terms of surface degradation because of UV strength against $V_m/V_{BD}$ was high in silicone polymer insulators. UV strength in silicone-type insulators increased at 1,000 $kJ/m^2$ because contact angle at the intial stage sharply decreased to from $113^{\circ}$ to $92.1^{\circ}$.

• 기술사
• /
• 제24권6호
• /
• pp.97-105
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ø70mm on the calcalious sand stone (soft-moderate-semi hard Rock). The total numbers of fire blast were 88 round. Scale distance were induces 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagation Law in Blasting Vibration (Equation omitted) where V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum Charge per delay-period of eighit milliseconds o. more(kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents Where the quantity D / W$^n$ is known as the Scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagrorized in three graups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge per delay Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom and over 100m distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30 ‥‥‥under 100m ‥‥‥V=41(D/$^3$√W)$\^$-1.41/ ‥‥‥A Over 100 ‥‥‥‥under 100m ‥‥‥V=121(D/$^3$√W)$\^$-1.56/ ‥‥‥B K value on the above equation has to be more specified for furthur understang about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• 농촌계획
• /
• 제21권2호
• /
• pp.163-175
• /
• 2015

This study aimed to analyze factors of importance and performance picked by customers of Bibijeong, a farm restaurant operated by the local community of Wanju-gun. Major points include: Recognition paths mostly were word of mouth and mass media, types of visit were in the company of friends, family members or work colleagues, and purposes of visit included consumption of meal and identifying features of the restaurant. Secondly, factor analysis showed that level of facility, atmosphere/cleanness, diversity of menu, employees, ingredients and network. The Cronbach Alpha coefficient was +0.6. Thirdly, average of importance of factors was 3.861 while average performance was 3.429. IPA analysis showed that employee(communication, customer contact) in the first quadrant proved the need for fast improvement through training. Atmosphere/cleanness (interior atmosphere, table clean, kitchen cleanliness, clean dishes, interion design) and employee(proficiency, menu recognition), foodstuff(freshness, origin, safety) in the second quadrant showed that the marketing strategy of improvement as well as maintaining current status is needed, including regular training and hygiene inspection. The third quadrant contains facilities(disability, baby, fire protection) and food menu(food packing, various menu, creative menu, menu description), network(village economic links), which showed the need for gradual improvement. The forth quadrant contains network(sights's near contains. The results so far can be summed into the statement that overcoming the basic functionality of providing meals and linking the restaurant with local attractions and local economy would be need, as well as building up the image of unique farm restaurant with local features, so that Bibijeong can serve as the centerpiece of community and foundation of exchange with other areas.

• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.117-121
• /
• 2016

Background: Definition and grouping of initiating events (IEs) are important basics for probabilistic safety assessment (PSA). An IE in a spent fuel reprocessing plant (SFRP) is an event that probably leads to the release of dangerous material to jeopardize workers, public and environment. The main difference between SFRPs and nuclear power plants (NPPs) is that hazard materials spread diffusely in a SFRP and radioactive material is just one kind of hazard material. Materials and Methods: Since the research on IEs for NPPs is in-depth around the world, there are several general methods to identify IEs: reference of lists in existence, review of experience feedback, qualitative analysis method, and deductive analysis method. While failure mode and effect analysis (FMEA) is an important qualitative analysis method, master logic diagram (MLD) method is the deductive analysis method. IE identification in SFRPs should be consulted with the experience of NPPs, however the differences between SFRPs and NPPs should be considered seriously. Results and Discussion: The plutonium uranium reduction extraction (Purex) process is adopted by the technics in a model reprocessing plant. The first extraction cycle (FEC) is the pivotal process in the Purex process. Whether the FEC can function safely and steadily would directly influence the production process of the whole plant-production quality. Important facilities of the FEC are installed in the equipment cells (ECs). In this work, IEs in the FEC process were identified and categorized by FMEA and MLD two methods, based on the fact that ECs are containments in the plant. Conclusion: The results show that only two ECs in the FEC do not need to be concerned particularly with safety problems, and criticality, fire and red oil explosion are IEs which should be emphatically analyzed. The results are accordant with the references.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.745-748
• /
• 2008

과거 건설 구조물은 사용 하중을 견딜만한 성능과 사용성, 부식에 대한 저항성 정도만이 요구되었다. 그러나 9.11 사건 이후 이러한 관점은 바뀌어, 폭발에 의한 충격 하중 및 그와 동시에 발생할 수있는 화재로 인한 열에 견딜 수 있는 구조물의 저항 성능이 기본적인 요구 조건으로써 중요시되고있다. 전 세계가 연일 테러의 위협 아래 놓여있는 현 시점에서 구조물의 내폭 성능은 매우 중요한 부분이라 할 수 있다. 이에 본 연구에서는 기존의 건설 재료로써 폭넓게 사용되고 있는 시멘트 복합체 혹은 콘크리트에인장 강도 및 연성이 뛰어난 FRP composite을 결합시켜 내폭 성능이 우수하고 기존 구조물 및 신설구조물에 모두 시공이 가능한 최적화된 분절 복합체(Segmented Composite) 및 층 구조(Layered Structure)를 개발하고, 그 성능을 평가하고자 한다. 이러한 내폭 성능의 향상을 통해, 열과 충격 하중, 동하중 및 high strain에 의한 구조물의 붕괴를 줄이고 붕괴 시점을 보다 늦출 수 있다면, 이로인해 발생되는 인명 피해 및 경제적 손실을 최소화시킬 수 있을 것이다.