• 제목/요약/키워드: Fire Module

검색결과 149건 처리시간 0.02초

Zigbee 모듈을 이용한 실시간 센서 모니터링 시스템 구현 (Implementation of Real-time Sensor Monitoring System on Zigbee Module)

  • 김광현
    • 한국전자통신학회논문지
    • /
    • 제6권2호
    • /
    • pp.312-318
    • /
    • 2011
  • 향후 USN 기술은 가정, 물류, 교통, 행정, 보건, 복지 및 환경 등의 다양한 분야에 적용될 것이고, 다가올 미래 사회의 기반 인프라로 자리 잡게 될 것이다. 본 논문은 IEEE 802.15.4 기반 센서네트워크 구조를 분석하고, Zigbee 모듈을 이용한 센서 데이터를 실시간으로 감지하는 모니터링 시스템을 구현하였다. 센서 데이터를 실시간으로 모니터링하는 시스템을 구현하기 위해 리눅스 기반 개발 환경을 구축하여 센서별 컴포넌트를 설계하였다. 본 논문의 연구 결과는 조명 시스템, 침입탐지, 화재 감지, 그리고 비정상 상태의 감지 및 통보 등의 분야에 활용할 수 있을 것이다.

불꽃놀이 시스템의 국산화에 대한 연구 (A Study on the Domestic Fireworks System)

  • 최준기;손무열;이종광
    • 한국정보전자통신기술학회논문지
    • /
    • 제7권1호
    • /
    • pp.1-9
    • /
    • 2014
  • 현재 우리나라의 불꽃놀이에서 사용되는 시스템은 대부분 미국산 장비와 소프트웨어로 노후되고 오래된 기술이다. 그 과정에서 불꽃놀이의 시작 신호를 받으면 미리 입력시켜둔 시그널대로 진행하고, 중간에 문제가 생기면 현장 관리자가 직접 전원을 꺼버리거나 다시 켜야 하는 등의 처리를 직접해야만 한다. 따라서, 본 논문에서는 이러한 원시적인 방법을 탈피하고 외국기술에 의존하고 있는 현실을 순수 국산기술을 이용하여 개발함으로써 비용측면 뿐만 아니라 현실에 맞게 편의성 및 안정성을 더욱 높일 수 있도록 하였다. 향후에는 해외로 기술을 전파함으로써 수익을 창출할 수 있는 발판을 마련하고자 한다.

인터넷 GIS를 이용한 도시생활정보시스템 구축 - 다중검색모듈개발을 중심으로 - (Construction of a Urban Life Information System Using Internet GIS - Focused on Development of Multi-Query Modules -)

  • 유환희;김성삼;조정운
    • 한국측량학회지
    • /
    • 제18권4호
    • /
    • pp.351-357
    • /
    • 2000
  • 최근 정보통신기술의 발달과 인터넷이 보편화되면서 생활공간에 관한 여러 가지 정보를 제공하기 위한 많은 생활정보시스템이 개발되고 있다. 특히, 네트워크를 통하여 다양하고 실시간적인 도시생활정보를 한눈에 확인할 수 있도록 인터넷과 GIS를 접목한 생활정보시스템의 개발이 활발히 진행되고 있다. 이와 같은 생활 정보시스템은 버스노선, 주차시설 등의 교통정보, 주택정보, 복지_의료_교육기관 정보, 관공서 정보, 공원, 영화관 등의 여가공간 정보 등 다채로운 내용을 제공하여 준다. 본 연구에서는 Visual Basic과 MapObject IMS, SDE, Oracle을 이용하여, 여러 가지 이벤트별로 다중검색을 수행하여 공간 및 속성정보를 제공할 수 있는 시스템을 구축하였다.

  • PDF

열전모듈 제습기의 제습 능력 및 에너지 효율 극대화를 위한 열교환기 용량 최적화 (Optimization of Heat exchanger Capacity to Maximize the Performance and Energy Efficiency of TEM Dehumidifiers)

  • 이태희
    • 한국지열·수열에너지학회논문집
    • /
    • 제17권3호
    • /
    • pp.13-20
    • /
    • 2021
  • The capacity optimization of the heat exchanger of the TEM dehumidifier was performed through numerical analysis. If the ratio of the size of heat exchangers on the cold and hot surfaces of the TEM is not appropriate, the larger the size of the heat exchanger results the lower performance and efficiency. Optimizing the ratio of heat exchangers on the cold surface of TEM can improve the performance and the efficiency compared to when the ratio is 50%. The optimal proportion of cold surface heat exchangers is inversely proportional to the sum of the size of the heat exchangers on the cold and hot surfaces. When the optimum ratio of cold surface heat exchanger was applied, the larger the sum of size of the two heat exchangers results the greater the improvement of the performance and efficiency, compared to when the ratio of cold surface heat exchangers is 50%.

Stability study on tenon-connected SHS and CFST columns in modular construction

  • Chen, Yisu;Hou, Chao;Peng, Jiahao
    • Steel and Composite Structures
    • /
    • 제30권2호
    • /
    • pp.185-199
    • /
    • 2019
  • Modular construction is an emerging technology to accommodate the increasing restrictions in terms of construction period, energy efficiency and environmental impacts, since each structural module is prefabricated offsite beforehand and assembled onsite using industrialized techniques. However, some innate structural drawbacks of this innovative method are also distinct, such as connection tying inaccessibility, column instability and system robustness. This study aims to explore the theoretical and numerical stability analysis of a tenon-connected square hollow section (SHS) steel column to address the tying and stability issue in modular construction. Due to the excellent performance of composite structures in fire resistance and buckling prevention, concrete-filled steel tube (CFST) columns are also taken into account in the analysis to evaluate the feasibility of adopting composite sections in modular buildings. Characteristic equations with three variables, i.e., the length ratio, the bending stiffness ratio and the rotational stiffness ratio, are generated from the fourth-order governing differential equations. The rotational stiffness ratio is recognized as the most significant factor, with interval analysis conducted for its mechanical significance and domain. Numerical analysis using ABAQUS is conducted for validation of characteristic equations. Recommendations and instructions in predicting the buckling performance of both SHS and CFST columns are then proposed.

제어 및 모니터링을 위한 스마트 키오스크 개발 (Development of Smart Kiosk for Controlling and Monitoring)

  • 김진사
    • 한국전기전자재료학회논문지
    • /
    • 제35권2호
    • /
    • pp.160-164
    • /
    • 2022
  • In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

충돌보호메모리모듈의 소형화를 위한 하우징 및 메모리 보드 설계와 검증 (Design and Verification of Housing and Memory Board for Downsizing for Crash Protected Memory Module)

  • 김준형;김정필;김정열;김태원
    • 한국항공우주학회지
    • /
    • 제48권1호
    • /
    • pp.81-88
    • /
    • 2020
  • 비행기록장치는 항공기 사고 조사를 위해 필요한 데이터를 저장하는 장비로 ED-112A 규격을 준수하여 개발되어야 한다. 비행기록장치는 일반 데이터 저장 장비와 달리 항공기 사고 후에도 데이터 복원이 가능해야 함으로 극한환경에서 데이터를 보호할 수 있는 하우징과 메모리 보드가 필요하다. 이를 위해 본 논문에서는 극한환경시험의 충격, 전단/인장, 관통, 압박 시험의 물리적 환경을 분석하여 시험을 견딜 수 있는 하우징을 설계하였고 항공기 장착을 고려하여 기존 대비 크기 및 중량을 최소화하였다. 고온화재, 저온화재에 견딜 수 있도록 단열재와 상변환물질을 적용하여 260도, 10시간 환경에서도 150도 이상으로 내부 온도가 상승하지 않도록 설계하였다. 또한 메모리 보드도 크기를 최소화하고 Hoping Programming 방식을 고안하여 16초 이상의 연속 데이터 손실을 방지할 수 있도록 설계하였다. 이를 통해 ED-112A를 만족하는 충돌보호메모리모듈을 제작에서 시험까지 완료하였다.

u-home 가스안전관리시스템 개발 및 성능시험 (Development and Performance Test of Gas Safety Management System based on the Ubiquitous Home)

  • 박규태;유근준;김영규;김영대;지차환;권종원;김희식
    • 전자공학회논문지SC
    • /
    • 제48권3호
    • /
    • pp.13-20
    • /
    • 2011
  • 본 논문에서는 무선 ZigBee 통신모듈과 지능형 가스안전기기를 이용하여 u-홈 가스안전관리시스템을 개발하여 가스안전관리의 효율을 향상시킬 수 있는 시스템을 제안하고자 한다. 제안한 시스템은 마이컴가스미터, 자동식소화기, 감지기 및 월패드로 구성된다. 마이컴미터는 가스압력, 가스유량, 지진을 모니터링하고, 자동식소화기는 가연성 가스의 누출상태와 $100^{\circ}C$$130^{\circ}C$의 온도를 측정한다. 그리고 감지기는 연기와 일산화탄소(CO)를 검지한다. 제안한 시스템은 가스사용중 이상상태발생시 마이컴가스미터는 경보와 함께 내부밸브를 차단시키고, 자동식소화기는 중간가스밸브를 차단하거나 소화약재를 분사시킨다. 감지기는 연기와 CO를 감지할 경우 각각 신호를 발생시킨다. 가스안전기기와 센서들은 지능적 조치를 취하고 그 정보를 월패드로 전달한다. 월패드는 상황정보를 실시간으로 서버에게 전달하고 사용자는 웹기반으로 서버에 접속하여 가스의 상황정보를 확인하거나 관리할 수 있다. 본 논문은 가스안전 및 위험관리의 시나리오를 고안하고 실험을 통하여 그 효용성을 증명하였다.

특수재난 대응 환자 격리 이송 장비의 효율성 및 편의성 평가: 마네킹시뮬레이션 연구 (Efficacy and Usability of Patient Isolation Transport Module for CBRN Disaster : A Manikin Simulation Study)

  • 김기홍;홍기정;함승희;최진우
    • 한국화재소방학회논문지
    • /
    • 제32권3호
    • /
    • pp.116-122
    • /
    • 2018
  • 본 연구의 목적은 개발 중인 화학, 생물학, 방사능 및 원자력 특수재난 대응 격리 이송 장비의 효율성과 사용 용이성을 평가하는 것이다. 상기 개발 장비는 자체 개발한 격리, 이송, 환자 감시 모듈을 통합하여 제작하였다. 응급구조사를 대상으로 한 마네킹을 이용한 무작위 교차 실험(또는 시뮬레이션)연구이며, 모든 연구대상자는 기존 장비와 특수재난 대응 격리 이송 장비의 시제품을 교대로 사용하였다. 생체신호 변화 검출 소요 시간과 치료 적용 소요 시간으로 효율성을 평가하였고 각 감시장치, 이송카트, 격리 장치 편의성에 대한 설문조사를 통해 사용 편의성으로 평가하였다. 총 12명의 응급구조사가 연구에 참여하였고 특수재난 대응 격리 이송 장비 군의 저산소증 검출 시간이 3.5초(2.5-3.9)로 기존 장비군의 4.9초(3.8-3.9)보다 유의하게 짧았다(p < 0.05). 심전도 변화 감지 소요 시간 및 안면 마스크 산소 공급 소요 시간의 감소 경향은 있었으나 통계적 유의성은 관찰되지 않았다. 특수재난 대응 격리 이송 장비 군의 환자 감시 장치의 전반적 만족도도 특수재난 대응 격리 이송 장비 군이 4점(3.5-5)으로 기존 장비군의 3점(3-3)에 비해 높았다(p < 0.05). 특수재난 대응 격리 이송 장비 사용군이 저산소증 검출 시간이 짧았으며 기존장비에 비해 환자 감시 장치의 전반적 만족도가 높은 것을 확인하였다.

전통사상(專統思想)과 서원건축배치(書院建築配置)의 구성(構成) 원리(原理) (Composition Principle of Seo-Won Architecture from the View of Its Disposition and Korean Traditional Thought)

  • 박정해;한동수
    • 교육시설 논문지
    • /
    • 제18권6호
    • /
    • pp.33-43
    • /
    • 2011
  • The Korean academics of classical learning, Seowon which from the middle of Joseon Dynasty was complexly reflected in "the illustration of Taiji(太極圖說)" Five-Elements school(陰陽五行說), "Zhou Yi(周易)" and a theory on spherical heaven and square ground(天圓地方) which based on orientalism. Also the theory of Xiangshu Xue(象數學) was a significant factor to decide the size(number of facade module) of Seowon architecture. So, in this study, how the oriental thought was adopted and reflected in existing 21 Seowon in South Korea. The size of Seowon architecture was adopted a theory of combination with heaven, earth and human(天地人三合論) that based on the theory of Xiangshu Xue on "the illustration of Taiji" and "Zhou Yi". "Zhou Yi" was the central thought of Confucian culture in Joseon Dynasty, with which Seowon space was divided into two, ancestral rites space and lecture space. It coincides with balance of yin(陰) and yang(陽), Five-Elements(五行) and four seasons(四季節). In lecture space, lecture hall is relevant with the water(水) and winter, and front tower structure or outer three-door is the fire(火) and summer. Also, central garden means the soil(土) and center. Thus, the size and spatial composition was planned with the philosophy, "the illustration of Taiji", Five-Elements school and a theory on spherical heaven and square ground. Yin and yang has an idea of the heaven and earth, and Five-Elements has an idea of direction and season with which spatial composition of Seowon could be set. And the numeral meaning on the theory of Xiangshu Xue established an ideal background for spatial composition of Seowon architecture.

  • PDF