• 한국터널지하공간학회 논문집
• /
• 제21권2호
• /
• pp.211-225
• /
• 2019

최근 우리나라 전 지역에서 지진이 발생하고 이에 각 분야에서의 내진해석 연구가 활발히 진행되고 있고 지반을 고려하는 SSI 해석 연구 또한 지속적으로 수행되고 있다. 하지만 지반을 고려한 대부분의 기존 동적해석의 경우, 수치해석 방법에 따른 건물의 동적거동에 대한 비교 분석이 부족한 실정이다. 따라서 본 연구에서는 초고층 건물을 대상으로 유한요소 프로그램인 MIDAS GTS NX와 유한차분 프로그램인 FLAC 2D를 사용하여 동적해석을 수행하고, 결과를 비교 분석하고자하였다. 연구 결과, 건물 지상 및 지하부의 휨응력의 경우 최대 압축 및 인장 모두 MIDAS GTS NX가 FLAC 2D보다 다소 크게 발생하였지만, 최대 수평변위값 및 분포양상, 취약부의 위치는 유사하게 나타났다. 따라서 동적해석을 위해 사용자의 편의에 따라 유한요소법이나 유한차분법에 근거한 프로그램 중 어느 것을 사용해도 차이가 없음을 확인하였다.

• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.27-39
• /
• 2005

수평배수재가 매설된 표층 준설 매립지반의 압밀해석을 하기 위한 유한 차분해석 프로그램을 개발하였다. 프로그램의 지배방정식은 1차원 자중압밀이론을 3차원으로 전개시킨 식을 이용하여 수평배수재가 설치된 지반의 다양한 경계조건을 적용하였으며 배수재로 간극수가 침투되는 침투압효과를 고려하였다. 해석프로그램의 타당성 검증을 위해서 실내 토조압밀시험을 실시하고 시간-침하량의 측정결과와 예측결과를 비교하였다. 수평배수재의 설계조건으로 배수재 횡방향 설치간격, 설치깊이, 설치층수의 변화가 압밀에 미치는 영향을 분석하였다.

• 대한기계학회논문집
• /
• 제10권1호
• /
• pp.15-24
• /
• 1986

본 논문에서는 특성유선해법에 의하여 각 방정식을 유한착분방정식으로 변환 하고 이를 유압시스템에 사용하기 위하여 유압회로의 일반적인 요소인 서어보밸브, 방향제어밸브, 유압모우터, 실린더, 릴리이프 밸브, 필터등이 회로내에 연결되어 있는 경우에 대하여 해석할 수 있는 프로그램을 짜고 유압시스템에서 발생하는 압력 및 유량의 속도현상을 예측할 수 있도록 하였다. 프로그램의 정확도를 판단하기 위하여 계산결과와 실험결과를 비교하였으며 압력과도현상에 미치는 요소인 부하의 크기, 관로의 재질, 관로의 길이, 밸브의 개별시간, 액튜에이터 입구측과 출구측 사이에 바이패스밸브의 설치효과에 대하여 연구하였다.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.129-133
• /
• 1995

균등한 종방향 압력을 받고있는 유연성 물질인 게스킷 상의 얇은 사각형유리판을 새로운 접근방법으로 해석하였다. 본-카만의 판의 이론에 의거 단순지지의 얇은 유리판의 응력과 처짐을 차분법으로 해석하였으며 비선형적으로 계산되는 컴퓨터 프로그램을 발전시켰다. 해의 보다 빠른 수렴을 위한 새로운 반복법을 전개시켰다.

• Journal of Mechanical Science and Technology
• /
• 제17권5호
• /
• pp.679-690
• /
• 2003

As the rate of increase in areal density of the HDD has accelerated, dynamic characteristics of the HDD actuator need to be improved with respect to the performance of the tracking servo and shock transmission. Therefore, it is important to analyze the vibration characteristic of the HDD actuator that consists of the VCM part, E-block and pivot bearing. In this paper, vibration modes of the HDD actuator are investigated the using finite element and experimental modal analyses methods. To develop a detailed finite element model, finite element models of each components of the actuator assembly are constructed and tuned to the results of the EMA. The VCM coil is modeled as an equivalent finite element model that has an orthotropic material property using auto-model updating program. Auto-model updating program with improved sensitivity based iterative method is applied to build a detailed finite element model using the result of the EMA. A detailed finite element model of the HDD actuator is then constructed and analyzed.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.272-278
• /
• 2009

Recently, there has been a growing interest in optical imaging of neural activity because the optical neuroimaging has considerable advantages over conventional imaging. Birefringence of the axon has been reported to change during neural activation, but the neurophysiological origin of the change is still unresolved. This study hypothesizes that the birefringence signal is at least partially attributed to the transient cellular volume change associated with nerve excitation. To examine this hypothesis, we investigated how the intensity of cross-polarized light transmitting through the axon would change as the size of the axon changes. For this purpose, a two-dimensional finite-difference time-domain program was developed with the improvement of the total-field/scattered-field method which reduces numerical noise. The results support our hypothesis in that the computed cross-polarized signals exhibit some agreement with previously-reported birefringence signals.

• 열처리공학회지
• /
• 제12권3호
• /
• pp.206-214
• /
• 1999

The effect of cooling rate on carbide precipitation during quenching of austenitic manganese steel was investigated by optical microscopy, image analyzer and numerical analysis. A computer program based on the finite difference method for analyzing heat treatment processes was developed in order to evaluate cooling rates and the possibility of carbide precipitation during quenching. The area ratio of carbide precipitated in the austenite matrix was measured by the image analyzer, and used to determine the critical point of carbide precipitation. Temperature-dependent critical cooling rates at the critical points were calculated using the present simulation program, The calculated results showed a good agreement with the experimental ones.

• 소음진동
• /
• 제8권2호
• /
• pp.267-273
• /
• 1998

This study aims at performing sensitivity analysis of piezoelectric smart structure for minimizing radiated noise from the structure, The structure consists of a flat plate on which disk shaped piezoelectric actuator is mounted, and finite element modeling is used for the structure. The finite element modeling uses a combination of three dimensional piezoelectric, flat shell and transition elements so thus it can take into account the coupling effects of the piezoelectric device precisely and it can also reduce the degrees of freedom of the finite element model. Electric potential on the piezoelectric actuator is taken as a design variable and total radiated power of the structure is chosen as an objective function. The objective function can be represented as Rayleigh's integral equation and is a function of normal displacements of the structure. For the convenience of computation, all degrees of freedom of the finite element equation is condensed out except the normal displacements of the structure. To perform the design sensitivity analysis, the derivative of the objective function with respect to the normal displacements is found, and the derivative of the norma displacements with respect to the design variable is calculated from the finite element equation by using so called the adjoint variable method. The analysis results are compared with those of the finite difference method, and shows a good agreement. This sensitivity analysis is faster and more accurate than the finite difference method. Once the sensitivity analysis program is used for gradient-based optimizations, one could achieve a better convergence rate than non-derivative methods for optimal design of piezoelectric smart structures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1165-1172
• /
• 2006

In this study, an aspect of settlement, developed from different ground improvement method like suction drain method using vacuum pressure and vertical drain method using overburden pressure, was compared each other. In order to analyze settlement tendency of each method exactly, the finite element analysis program was used. The analyses of vertical settlement and lateral displacement for suction drain method and vertical drain method were conducted independently during the solving stage. The initial condition of drainage zone was fixed with 25m depth and 21m width. After the program analyses, the settlement condition had a different tendency with the ground improvement method. Especially, in the results of vertical drain method, the disparity of settlement between the middle of improved zone and unimproved zone. In the case of suction drain method, however, the difference of settlement was smaller than that of vertical drain method.

• Computers and Concrete
• /
• 제19권5호
• /
• pp.567-577
• /
• 2017

This study presents investigation of the behavior of moderately thick reinforced concrete slabs having hollow cores with different parameters. The experimental part of this investigation includes testing eight specimens of solid and hollow-core slab models having (2.05 m) length, (0.6 m) width and (25 cm) thickness under two monotonic line loads. Load versus deflection was recorded during test at mid span and under load. Numerically, the finite element method is used to study the behavior of these reinforced concrete slabs by using ANSYS computer program. The specimens of slab models are modeled by using (SOLID65) element to represent concrete slabs and (LINK180) element to represent the steel bars as discrete axial members between concrete nodes. The finite element analysis has showed good agreement with the experimental results with difference of (4.71%-8.68%) in ultimate loads. A parametric study have been carried out by using ANSYS program to investigate the effects of concrete compressive strength, size and shape of core, type of applied load and effect of removing top steel reinforcement.