• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.545-552
• /
• 2019

The analysis and design of complex structures like sandwich-panel elements are difficult; the use of finite element method for the analysis is complicated and time consuming when non-linear effects are considered. On the other hand, artificial neural network (ANN) models can capture the non-linear effects and its application requires lesser computational demand. Two ANN models were trained, tested and validated to compute the force for a given displacement of a sandwich-type roof element; 2555 force and element deformation pairs were used for training the ANN models. For the models trained without considering the damping effect, there were two values in the input layer: maximum displacement and current displacement, and for the model considering damping, displacement from the previous step was used as an additional input. Totally, 400 ANN models were trained. Results show that there is a good agreement between the experimental and simulated data, and the models showed a good performance with a mean square error value of 4548.85. Both the ANN models could simulate the inelastic behaviour, loss of rigidity, and evolution of permanent displacements. The models could also interpolate and extrapolate, which enables them to be used as an analysis and design tool for such complex elements.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.96-102
• /
• 2005

Acoustic Emission(AE) technique has been applied to not only material characterization evaluation but also on-line monitoring of the structural integrity. The AE source location technique is very important to identify the source, such as crack, leak detection. Since the AE waveforms obtained from sensors are very difficult to distinguish the defect signals, therefore, it is necessary to consider the signal analysis of the transient wave-form. In this study, we have divided the region of interest into a set finite elements, and calculated the arrival time differences between sensors by using the velocities at every degree from 0 to 90. A new technique for the source location of acoustic emission in fiberboard plates has been studied by introducing Wavelet Transform(WT) do-noising technique. WT is a powerful tool for processing transient signals with temporally varying spectra. If the WT de-noising was employed, we could successfully filter out the errors of source location in fiberboard plates by arrival time difference method. The accuracy of source location appeared to be significantly improved.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.34-40
• /
• 2004

This paper presents an analysis of SAR(Specific Absorption Rate) distribution characteristics in a head model using FDTD(Finite Difference Time Domain). In this study human head was modelled in four elements-layered structure, consisting of skin, fat, skull and brain. To calculate the electromagnetic fields wihtin the head model, FDTD method was used. In the FDTD method, the electromagnetic wave is analyzed by solving a Maxwell's equations repeatedly. For the calculation, distance between power source and head model increased by 10[m]. Power density and incident electric field intensity were calculated. Based on the incident electric field, the program which calaculated internal electric fields intensity and SAR calculation of the head model were developed. The results of developed program using FDTD were compared with those of a commericial programs, which showed the availability and usefulness of the suggested scheme in this paper.

• 열처리공학회지
• /
• 제32권1호
• /
• pp.17-28
• /
• 2019

Jominy hardenability curves of low alloy steel containing less than 5 wt.% of alloying elements in total were calculated by applying Scheil's rule of additivity to pre-calculated isothermal transformation curve. Isothermal transformation curve for each phase in steel was approximated as a simple mathematical equation by using Kirkaldy's approach and all coefficients in the equation were estimated from experimental temperature-time-transformation (TTT) and/or continuous cooling transformation (CCT) data in the literature. Then jominy test with simple boundary conditions was performed in computer by applying the finite difference scheme. The resultant cooling curves at each location along a longitudinal direction of Jominy bar were applied to calculate phase fractions as well as mechanical properties such as micro Vickers hardness. The simulated results were compared with experimental CCT data and Jominy curves in the literature.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.46-53
• /
• 1999

In this paper, made was a study on a mesh generation method based on the pollution error. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. When the pollution error is significant, nothing can be said about the reliability of any estimator based on local computations in the patch. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The mesh generated from the conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But the remeshing scheme in the proposed method was used here. It was shown that the pollution-adaptive mesh improves the E.I., simply denoted as Effectivity Index, on the patch of interest, and the pollution error reduces less than the local error.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.403-414
• /
• 1994

본 연구에서는 철근콘크리트 격납구조물에서 가상의 냉각재 유출사고에 의한 온도하중과 압력에 따른 거동을 알아보기 위한 비선형 해석을 수행하였다. 시간에 따른 온도하중을 결정하기 위하여 과도온도해석을 통해 격납구조물 단면내의 온도분포를 구하였다. 구조물은 기하학적 비선형성과 재료비선형성을 고려한 쉘요소로 이상화되며, 쉘요소는 두께방향에 따라 변하는 응력을 고려하기 위해 몇 개의 층으로 이루어진 모델을 사용하였다. 본 연구에서는 재료비선형성을 고려하기위해 콘크리트의 압축거동은 Drucker-Prager 항복규준에 의해 모델링하며 부착효과를 고려한 콘크리트의 인장거동을 나타내기 위해 인장증강모델을 사용하였다. 철근은 축방향력만을 받는 분포 철근층으로 모델링하였으며 steel liner는 Von Mises 항복규준에 따라 모델링하였다. 열응력은 인접한 두시간 단계에서의 온도차를 하중증가로 고려하여 초기변형 문제로 변환하여 결정되었다. 본 연구에서의 수치해석결과에 의하면 과도온도해석에 근거한 비선형온도경사를 고려할때의 응력이 고려하지 않을때의 응력에 비해 크게 나타남을 알 수 있었다. 본 연구는 우리나라에서 많이 건설되고 있는 원자력발전소의 정확하고 진보적인 해석을 위하여 비선형해석 기법을 유도하여 제시하였으며, 특히 온도분포의 비선형성과 재료비선형을 고려한 고급 유한요소해석을 가능케하고 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.491-496
• /
• 2003

In sensitivity analysis, semi-analytical method(SAM) reveals severe inaccuracy problem when relatively large rigid body motions are identified for individual elements. Recently such errors of SAM resulted by the finite difference scheme have been improved by the separation of rigid body mode. But the eigenvalue should be obtained first before the sensitivity analysis is performed and it takes much time in the case that large system is considered. In the present study, by constructing a reduced one from the original system, iterative method combined with mode decomposition technique is proposed to compute reliable semi-analytical design sensitivities. The sensitivity analysis is performed by the eigenvector acquired from the reduced system. The error of SAM caused by difference scheme is alleviated by Von Neumann series approximation.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.185-193
• /
• 1996

Errors included in solutions obtained by the boundary element method are generally larger than those by the finite element method in the case that the number of discreted elements is small. One of the reasons is supposed to be attributed to the error which will be produced in the numerical integration of the singular functions in two dimensional elastic problem. Then, treatment of analytical integration to reduce computing time and to decrease errors of boundary element method are proposed.

• Structural Engineering and Mechanics
• /
• 제26권5호
• /
• pp.545-556
• /
• 2007

In this paper, a hybrid boundary element technique is implemented to analyze nonlinear transient pile soil interaction in Gibson type nonhomeogenous soil. Inelastic modeling of soil media is presented by introducing a rational approximation to the continuum with nonlinear interface springs along the piles. Modified $\ddot{O}$zdemir's nonlinear model is implemented and systems of equations are coupled at interfaces for piles and pile groups. Linear beam column finite elements are used to model the piles and the resulting governing equations are solved using an implicit integration scheme. By enforcing displacement equilibrium conditions at each time step, a system of equations is generated which yields the solution. A numerical example is performed to investigate the effects of nonlinearity on the pile soil interaction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.434-441
• /
• 1999

The newly proposed Precast Segmental Mettled (PSM), which makes use of precast elements for election, is relatively new, efficient and fast mettled for the construction of prestressed box girder bridges. A precast segment of 25m long pretensioned in the fabrication yard is transported by a special trailer and a launching truss to its final position. The segments are then connected in the site by post-tensioning to make a continuous prestressed concrete box girder bridges. The purpose of this parer is to analyze and evaluate the design of precast prestressed concrete box girder bridges. The detailed analyses including time-dependent behavior of PSM bridges are conducted. The major results and findings, which have been obtained from finite element analysis of PSM bridge, are discussed in this paper and these results will be a good base for the design and analysis of a new precast bridges.