Browse > Article
http://dx.doi.org/10.12989/sem.2019.71.5.545

Using a feed forward ANN to model the inelastic behaviour of confined sandwich panels  

Marante, Maria E. (Laboratory of Structural Mechanics, Lisandro Alvarado University)
Barreto, Wilmer J. (Laboratory of Structural Mechanics, Lisandro Alvarado University)
Picon, Ricardo A. (Laboratory of Structural Mechanics, Lisandro Alvarado University)
Publication Information
Structural Engineering and Mechanics / v.71, no.5, 2019 , pp. 545-552 More about this Journal
Abstract
The analysis and design of complex structures like sandwich-panel elements are difficult; the use of finite element method for the analysis is complicated and time consuming when non-linear effects are considered. On the other hand, artificial neural network (ANN) models can capture the non-linear effects and its application requires lesser computational demand. Two ANN models were trained, tested and validated to compute the force for a given displacement of a sandwich-type roof element; 2555 force and element deformation pairs were used for training the ANN models. For the models trained without considering the damping effect, there were two values in the input layer: maximum displacement and current displacement, and for the model considering damping, displacement from the previous step was used as an additional input. Totally, 400 ANN models were trained. Results show that there is a good agreement between the experimental and simulated data, and the models showed a good performance with a mean square error value of 4548.85. Both the ANN models could simulate the inelastic behaviour, loss of rigidity, and evolution of permanent displacements. The models could also interpolate and extrapolate, which enables them to be used as an analysis and design tool for such complex elements.
Keywords
Artificial Neural Networks; inelastic behavior; composed panels; non-traditional structures; permanent displacement;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Pendharkar, U., Chaudhary, S. and Nagpal, A.K. (2011), "Prediction of moments in composite frames considering cracking and time effects using neural network models", Struct. Eng. Mech., 39(2), 267-285. https://doi.org/10.12989/sem.2011.39.2.267.   DOI
2 Perdomo, M. E., Picon, R., Marante, M. E., Hild, F., Roux, S. and Florez-Lopez, J. (2013), "Experimental analysis and mathematical modeling of fracture in RC elements with any aspect ratio", Eng. Struct., 46, 407-416. https://doi.org/10.1016/j.engstruct.2012.07.005.   DOI
3 Perera, R., Barchin, M., Arteaga, A. and Diego, A. De. (2010), "Prediction of the ultimate strength of reinforced concrete beams FRP-strengthened in shear using neural networks", Compos. Part B, 41(4), 287-298. https://doi.org/10.1016/j.compositesb.2010.03.003.   DOI
4 Picon-Rodriguez, R., Quintero-Febres, C. and Florez-Lopez, J. (2007), "Modeling of cyclic bond deterioration in RC beamcolumn connections", Struct. Eng. Mech., 26(5), 569-589. https://doi.org/10.12989/sem.2007.26.5.569.   DOI
5 Poluraju, P. and Rao, G.A. (2014), "Behaviour of 3D-panels for structural applications under general loading: A state-of-theart", IJRET, 3(16), 173-181.
6 Ramnavas, M.P., Patel, K.A., Chaudhary, S. and Nagpal, A.K. (2017), "Explicit expressions for inelastic design quantities in composite frames considering effects of nearby columns and floors", Struct. Eng. Mech., 64(4), 437-447. https://doi.org/10.12989/sem.2017.64.4.437.   DOI
7 Reuter, U., Sultan, A. and Reischl, D.S. (2018), "A comparative study of machine learning approaches for modeling concrete failure surfaces", Adv. Eng. Software, 116, 67-79. https://doi.org/10.1016/j.advengsoft.2017.11.006.   DOI
8 Rosenblatt, F. (1958), "The perceptron: A probabilistic model for information storage and organization in the brain", Psychological Rev., 65(6), 386-408. http://dx.doi.org/10.1037/h0042519.   DOI
9 Taffese, W.Z. and Sistonen, E. (2017), "Machine learning for durability and service-life assessment of reinforced concrete structures: Recent advances and future directions", Automat. Construct., 77, 1-14. https://doi.org/10.1016/j.autcon.2017.01.016.   DOI
10 Rotaru, F., Rosculet, R., Chirica, I. and Beznea, E.F. (2016), "Experimental Analysis of the Sandwich Composites Loaded to Mechanical Impact", Adv. Compos. Mater. Eng., 198-203. http://hdl.handle.net/123456789/2147.
11 Yavuz, G. (2016), "Shear strength estimation of RC deep beams using the ANN and strut-and-tie approaches", Struct. Eng. Mech., 57(4), 657-680. https://doi.org/10.12989/sem.2016.57.4.657.   DOI
12 Yoon, K., Kim, D.N. and Lee, P.S. (2017), "Nonlinear torsional analysis of 3D composite beams using the extended St. Venant solution", Struct. Eng. Mech., 62(1), 33-42. https://doi.org/10.12989/sem.2017.62.1.033.   DOI
13 Zopf, C. and Kaliske, M. (2017), "Numerical characterisation of uncured elastomers by a neural network based approach", Comput. Struct., 182, 504-525. https://doi.org/10.1016/j.compstruc.2016.12.012.   DOI
14 ASTM E72-15 (2015), Standard Test Methods of Conducting Strength Tests of Panels for Building Construction, ASTM International, West Conshohocken, PA, USA.
15 Akbas, B. (2006), "A neural network model to assess the hysteretic energy demand in steel moment resisting frames", Struct. Eng. Mech., 23(2), 177-193. https://doi.org/10.12989/sem.2006.23.2.177.   DOI
16 Amani, J. and Moeini, R. (2012), "Prediction of shear strength of reinforced concrete beams using adaptive neuro-fuzzy inference system and artificial neural network", Scientia Iranica, 19(2), 242-248. https://doi.org/10.1016/j.scient.2012.02.009.   DOI
17 ASTM E564-06 (2018), Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings, ASTM International, West Conshohocken, PA, USA.
18 Erdem, H. (2017), "Predicting the moment capacity of RC slabs with insulation materials exposed to fire by ANN", Struct. Eng. Mech., 64(3), 339-346. https://doi.org/10.12989/sem.2017.64.3.339.   DOI
19 Azqandi, M., Nooredin, N. and Ghoddosian, A. (2018), "Optimization of spring back in U-die bending process of sheet metal using ANN and ICA", Struct. Eng. Mech., 65(4), 447-452. https://doi.org/10.12989/sem.2018.65.4.447.   DOI
20 Darendeli, M.B. (2001), "Development of a new family of normalized modulus reduction and material damping curves", Ph.D. Dissertation, The University of Texas at Austin, USA. http://hdl.handle.net/2152/10396.
21 Freitag, S., Cao, B.T., Ninic, J. and Meschke, G. (2018), "Recurrent neural networks and proper orthogonal decomposition with interval data for real-time predictions of mechanised tunnelling processes", Comput. Struct., 207, 258-273. https://doi.org/10.1016/j.compstruc.2017.03.020.   DOI
22 Hashemi, S.J., Razzaghi, J., Moghadam, A.S. and Lourenco, P.B. (2018), "Cyclic testing of steel frames infilled with concrete sandwich panels", Archives Civil Mech. Eng., 18(2), 557-572. https://doi.org/10.1016/j.acme.2017.10.007.   DOI
23 Guerrero, N., Marante, M.E., Picon, R. and Florez-Lopez, J. (2007), "Model of local buckling in steel hollow structural elements subjected to biaxial bending", J. Consruct. Steel Res., 63(6), 779-790. https://doi.org/10.1016/j.jcsr.2006.08.006.   DOI
24 Hadi, M.N.S. (2003), "Neural networks applications in concrete structures", Comput. Struct., 81(6), 373-381. https://doi.org/10.1016/S0045-7949(02)00451-0.   DOI
25 Haj-Ali, R., Kim, H.K., Koh, S.W., Saxena, A. and Tummala, R. (2008), "Nonlinear constitutive models from nanoindentation tests using artificial neural networks", J. Plasticity, 24(3), 371-396. https://doi.org/10.1016/j.ijplas.2007.02.001.   DOI
26 Mohamed, M., Hussein, R., Abutunis, A., Huo, Z., Chandrashekhara, K. and Sneed, L. (2016), "Manufacturing and evaluation of polyurethane composite structural insulated panels", J. Sandwich Struct. Mater., 18(6), 769-789. https://doi.org/10.1177/1099636215626597.   DOI
27 Mansour, M.Y., Dicleli, M., Lee, J.Y. and Zhang, J. (2004), "Predicting the shear strength of reinforced concrete beams using artificial neural networks", Eng. Struct., 26(6), 781-799. https://doi.org/10.1016/j.engstruct.2004.01.011.   DOI
28 Mariani, C., Venini, P. and Nascimbene, R. (2003), "Neural networks in computational damage mechanics", Comput. Fluid Solid Mech., 426-428. https://doi.org/10.1016/B978-008044046-0.50105-6.
29 De Matteis, G. and Landolfo, R. (1999), "Structural behaviour of sandwich panel shear walls: An experimental analysis", Mater. Struct., 32(5), 331-341. https://doi.org/10.1007/BF02479624.   DOI