• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.119-131
• /
• 2022

Due to the complexity of the structure and the limits of classical SEA, a combined SEA approach is employed, with angle-dependent SEA in the low- and mid-frequency ranges and advanced SEA (ASEA) considering indirect coupling in the high-frequency range. As an important component of the steel box girder, the dynamic response of an L-junction periodic ribbed plate is calculated first by the combined SEA and validated by the impact hammer test and finite element method (FEM). Results show that the indirect coupling due to the periodicity of stiffened plate is significant at high frequencies and may cause the error to reach 38.4 dB. Hence, the incident bending wave angle cannot be ignored in comparison to classical SEA. The combined SEA is then extended to investigate the vibration properties of the steel box girder. The bending wave transmission study is likewise carried out to gain further physical insight into indirect coupling. By comparison with FEM and classical SEA, this approach yields good accuracy for calculating the dynamic responses of the steel box girder made of periodic ribbed plates in a wide frequency range. Furthermore, the influences of some important parameters are discussed, and suggestions for vibration and noise control are provided.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.774-779
• /
• 2007

The crash energy absorbers used in the trains normally are classified into two types. The first is the structure type, which mainly used in not only the primary structure of train but also the crash energy absorbers at the critical accidents. The second is the module type, which just absorbs the crash energy independently and attached onto the structures of the trains. The expansion tube is widely used as the module type of the crash energy absorbers, especially in the trains that have a heavy mass. Since the crash energy is absorbed by means of expanding the tube in the radial direction, the features of the expansion tube have the uniform load during the compression. As the uniform load remains in sudden impact, the expansion tube is effective to decrease acceleration of passengers when the train accident occur. The buckling instability of the expansion tubes is affected by the boundary conditions, thickness and length of tube. In this study, the effects of the length and thickness of the expansion tubes under the arbitrary load on the buckling are studied using the ABAQUS/standard and ABAQUS/explicit, a commercial finite element analysis program, and then presents the guideline to design the expansion tubes. The analysis processes to compute the buckling load consist of the linear buckling analysis and the nonlinear post-buckling analysis. To analysis the nonlinear post-buckling analysis, the geometry imperfections are introduced by applying the linear buckling modes to nonlinear post-buckling analysis.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.33-40
• /
• 2013

Since most of yacht sails are made of thin fabric, they form cambered sail shape that can efficiently generate lift power by aerodynamic interaction and by external force delivered from supporting structures such as mast and boom. When the incident flow and external force alter in terms of volume or condition, the shape of sail also change. This deformation in shape has impact on the peripheral flow and aerodynamic interaction of the sail, and thus it is related to the deformation of the sail in shape again. Therefore, the precise optimization of aerodynamic performance of sail requires fluid-structure interaction (FSI) analysis. In this study, the simplified sail without camber was under experiment for one-way FSI that uses the result of flow analysis to the structural analysis as load condition in an attempt to fluid-structure interaction phenomenon. To confirm the validity of the analytical methods and the reliability of numerical computation, the difference in deformation by the number of finite element was compared. This study reproduced the boundary conditions that sail could have by rigs such as mast and boom and looked into the deformation of sail. Sail has non-linear deformation such as wrinkles because it is made of a thin fabric material. Thus non-linear structural analysis was conducted and the results were compared with those of analysis on elastic material.

• Earthquakes and Structures
• /
• 제24권4호
• /
• pp.275-288
• /
• 2023

Based on the crucial role of high-speed railway bridges (HSRBs) in the safety of high-speed railway operations, it is an important approach to mitigate earthquake hazards by proceeding with seismic risk assessments in their whole life. Bridge seismic risk assessment, which usually evaluates the seismic performance of bridges from a probabilistic perspective, provides technical support for bridge risk management. The seismic performance of bridges is greatly affected by the degradation of material properties, therefore, material damage plays a nonnegligible role in the seismic risk assessment of the bridge. The effect of material damage is not considered in most current studies on seismic risk analysis of bridges, nevertheless. To fill the gap in this area, in this paper, a nonlinear dynamic time-history analysis has been carried out by establishing OpenSees finite element model, and a seismic vulnerability analysis is carried out based on the incremental dynamic analysis (IDA) method. On this basis, combined with the site risk analysis, the time-dependent seismic risk analysis of an offshore three-span HSRB in the whole life cycle has been conducted. The results showed that the seismic risk probabilities of both components and system of the bridge increase with the service time, and their seismic risk probabilities increase significantly in the last service period due to the degradation of the material strength, which demonstrates that the impact of durability damage should be considered when evaluating the seismic performance of bridges in the design and service period.

• 한국지반환경공학회 논문집
• /
• 제23권4호
• /
• pp.29-39
• /
• 2022

도심지의 심각한 교통체증을 해결하기 위해 지하차도, 대심도 지하도로, 광역급행철도 등 대규모 지하공간 개발이 이루어지고 있다. 도심지 지하차도로 건설로 인해 인접한 도시철도 A호선 교각기초 영향 최소화 및 안정성 확보를 위해 흙막이 가시설 보강, 기초 보강 등을 실시하였다. 본 연구에서는 근접도 평가와 함께 지하차도 굴착공사로 인한 안정성을 검토하기 위해 3차원 유한요소해석을 수행하고 수치해석 결과를 통해 보강효과를 정량적으로 분석하였다. 분석결과 기존 보강을 수행한 결과에 비해 겹침 CIP와 지반보강 그라우팅을 실시할 경우 흙막이 가시설 벽체 변위는 50% 이상 저감되었고 기초말뚝의 응력에서도 45% 이상 감소 효과가 있었다. 수치해석결과 분석을 토대로 근접시공 시 보강그라우팅, 가시설 벽체의 강성 증대 등을 통해 가시설 벽체의 변위 발생을 적극적으로 억제해야 함을 확인할 수 있었다.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.191-200
• /
• 2017

적정포장설계는 포장 원자재 사용량 및 폐기물 발생량뿐만 아니라 재료비 및 물류비 절감이 가능하여 포장재의 환경성과 경제성을 모두 충족시킨다. 유한요소해석은 구조해석, 열전달, 유체운동, 전자기 등 다양한 분야에 유용한 도구로 적용되고 있지만, 포장분야에서는 그 적용이 미비하다. 이에 따라 포장분야에 유한요소해석 적용은 컴퓨터 시뮬레이션으로 포장 설계가 가능하기 때문에 향후 연구에 있어 비용과 시간 절약이 가능하며 적정포장설계를 통해 포장 폐기물과 물류비 절감이 가능할 것으로 판단된다. 따라서 본 연구에서는 향후 포장분야에서 유한요소해석(FEM) 프로그램을 활용한 연구 설계에 도움이 되고자 하는 목적으로 국내에서 발표된 유한요소해석 관련 논문을 조사하였다. 1991년부터 2017년까지의 국내 학술지 및 학위논문에 게재된 유한요소해석 관련 논문 중 포장과 직접적인 연관성이 있다고 판단된 32편의 논문을 분석하여 연구의 동향을 살펴보았다. 그 결과 각 논문을 사용한 연구주제 및 내용, 유한요소해석 프로그램, 해석방법 등으로 분석하고 향후 포장분야에 활용할 수 있는 방향에 대하여 제시하였다. 포장 영역에 유한요소해석의 적용은 포장재에 가해지는 응력 및 진동해석을 통해 구조변경 및 두께 감량을 가능하게 하고 이에 따라 기계적 강도 향상 및 포장소재 사용량 감소를 통해 적정포장설계로 원가 절감이 가능할 것으로 판단된다. 따라서 향후 포장 분야의 연구에 있어, 유한요소해석을 함께 병행한다면 경제적이고 합리적인 포장 설계를 할 수 있을 것으로 판단된다.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.129-135
• /
• 2021

Injection molding is a manufacturing method of melting the polymer resin and injecting it into a mold to molding it into the desired form. Due to the short molding time and outstanding formability, complex products can be shaped with high precision and it is the most widely used polymer molding method. However, there may be areas that are not filled depending on the location of the injection gate where polymer resin is injected. Formability is determined by deformation and surface precision due to the impact of residual stress after molding. Hence, choosing the location of the injection gate is very important and molding analysis of injection molding is essential to reduce the cost of the mold. This study evaluated the injection formability based on the location of the injection gate of the vertical machining center ATC tool port using injection molding analysis and the results were compared and analyzed. Injection molding analysis was conducted on filling, packing, and deformation according to the location of the gate of the ATC tool port. From each injection gate location, filling time, pressure, and maximum deformation were compared. At gate 2, conditions of molding time and the location of the gate were far superior in production and quality. Gate 2 produced the smallest deformation of 0.779mm with the best quality.

• 한국음향학회지
• /
• 제42권3호
• /
• pp.227-232
• /
• 2023

수중 소음 공해는 해양 환경에 막대한 영향을 미친다. 본 연구에서는 기포층을 갖는 구조물의 음향 방사 효율을 추정하기 위한 간이 해석법을 제안하였다. 선행 연구 결과를 바탕으로 공기층에 의한 삽입 손실은 감쇠량과 동등하다고 가정하고, 기포층에 의한 삽입 손실은 수치해석 결과의 후처리 기법을 사용하여 계산되었다. 제안된 방법의 검증을 위해 판 구조물에 대한 음향-구조 완전 연성 해석을 수행하였다. 음향-구조 완전 연성 해석은 상용 유한 요소 프로그램 COMSOL Multiphysics를 사용하여 수행되었으며, 기포층의 음향 특성은 Commander 및 Prosperetti 이론을 사용하여 구현하였다. 음향 방사 효율 비교를 통해 간이 해석법과 완전 연성 해석 결과의 경향이 유사함을 확인하였다. 이러한 결과를 바탕으로 기포층을 갖는 쐐기 구조물의 방사 효율 메커니즘을 예측할 수 있음을 확인하였다.

• 한국공간구조학회논문집
• /
• 제24권2호
• /
• pp.31-41
• /
• 2024

This study aims to investigate the seismic response of a large span thin shell structures and assess their displacement under seismic loads. The study employs finite element analysis to model a thin shell structure subjected to seismic excitation. The analysis includes eigenvalue analysis and time history analysis to evaluate the natural frequencies and displacement response of the structure under seismic loads. The findings show that the seismic response of the large span thin shell structure is highly dependent on the frequency content of the seismic excitation. The eigenvalue analysis reveals that the tenth mode of vibration of the structure corresponds to a large-span mode. The time history analysis further demonstrates, with 5% damping, that the displacement response of the structure at the critical node number 4920 increases with increasing seismic intensity, reaching a maximum displacement of 49.87mm at 3.615 seconds. Nevertheless, the maximum displacement is well below the allowable limit of the thin shell. The results of this study provide insight into the behaviour of complex large span thin shell structures as elevated foundations for buildings under seismic excitation, based on the displacement contours on different modes of eigenvalues. The findings suggest that the displacement response of the structure is significant for this new application of thin shell, and it is recommended to enhance the critical displacement area in the next design phase to align with the findings of this study to resist the seismic impact.

• 대한기계학회논문집A
• /
• 제35권3호
• /
• pp.289-297
• /
• 2011

명시적 유한요소법은 비선형성이 많은 대형 문제를 푸는 데는 꼭 필요하지만 종종 그 결과의 해석에 있어서는 어려움이 수반된다. 특별한 경우, 가속도의 과도응답은 극심한 불연속, 과도한 노이즈 또는 앨리어싱이 발생하여 평가가 불가능할 때도 있다. 본 논문에서는 유한요소법의 명시적분에 의한 과도응답 및 응답스펙트럼의 새로운 후처리기법을 제안한다. 해석기에 의한 가속도 거동의 수치적인 에러를 제거하고 물리적인 가속도를 추출하기 위하여 가우스커널을 이용하는 평활화법을 제안하였다. 이 평활화는 신호처리 필터링 기법과 같이 복잡한 주파수에 대한 고려가 없이도 속도에 대한 결과와 응답스펙트럼을 참조함으로써 행해진다. 특히 가우스커널 평활화는 가속도의 피크 값을 잘 나타내면서도 평활도가 우수하였다. 제안된 평활화법에 의하여 부드러운 가속도는 물론 이를 이용하여 설계에서 필요한 층 응답스펙트럼을 구할 수 있다.