• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.357-364
• /
• 2003

A fully discrete $H^1-mixed$ finite element approximation for the single-phase Stefan problem is introduced and the unique existence of the approximation is established. And some numerical experiments are given.

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.319-328
• /
• 2006

A simple approximation method for the stress intensity factor at the tip of the axial semielliptical cracks on the cylindrical vessel is developed. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite element analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. For these, 3-D finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R=0.1. The approximation solutions are within $\pm2.5%$ of the those of finite element analysis using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the approximation method provides sufficiently accurate stress intensity factor values for the axial semi-elliptical flaws on the surface of the reactor pressure vessel.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.251-264
• /
• 2004

We introduce a semidiscrete mixed finite element approximation for the single-phase linear Stefan problem and show the unique existence of the approximation. And the optimal rate of convergence in $L^2$ and $H^1$ norms are derived.

• Structural Engineering and Mechanics
• /
• v.83 no.2
• /
• pp.273-282
• /
• 2022

In this paper, we propose a new concept for error estimation in finite element solutions, which we call mode-based error estimation. The proposed error estimation predicts a posteriori error calculated by the difference between the direct finite element (FE) approximation and the recovered FE approximation. The mode-based FE formulation for the recently developed self-updated finite element is employed to calculate the recovered solution. The formulation is constructed by searching for optimal bending directions for each element, and deep learning is adopted to help find the optimal bending directions. Through various numerical examples using four-node quadrilateral finite elements, we demonstrate the improved predictive capability of the proposed error estimator compared with other competitive methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.335-341
• /
• 2009

In this paper, review of developed MLS-based finite elements and a proposal for their applications are described. The shape functions and their derivatives of MLS-based finite elements are constructed using Moving-Least Square approximation. In MLS-based finite element, using the adequate influence domain of weight function used in MLS approximation, kronecker delta condition could be satisfied at the element boundary. Moreover, because of the characteristics of MLS approximation, we could easily add extra nodes at an arbitrary position in MLS-based finite elements. For these reasons, until now, several variable-node elements(2D variable element for linear case and quadratic case and 3D variable-node elements) and finite crack elements are developed using MLS-based finite elements concept. MLS-based finite elements could be extended to 2D variable-node triangle element, 2D finite crack triangle element, variable-node shell element, finite crack shell element, and 3D polyhedron element. In this paper, we showed the feasibility of 3D polyhedron element at the case of femur meshing.

• Structural Engineering and Mechanics
• /
• v.73 no.1
• /
• pp.1-16
• /
• 2020

Finite elements based on the partition of unity (PU) approximation have powerful capabilities for p-adaptivity and solutions with high smoothness without remeshing of the domain. Recently, the PU approximation was successfully applied to the three-node shell finite element, properly eliminating transverse shear locking and showing excellent convergence properties and solution accuracy. However, the enrichment with the PU approximation results in a significant increase in the number of degrees of freedom; therefore, it requires greater computational cost, thus making it less suitable for practical engineering. To circumvent this disadvantage, we propose a new strategy to decrease the total number of degrees of freedom in the existing PU-based shell element, without loss of optimal convergence and accuracy. To alleviate the locking phenomenon, we use the method of mixed interpolation of tensorial components and perform convergence studies to show the accuracy and capability of the proposed shell element. The excellent performances of the new shell elements are illustrated in three benchmark problems.

• Korean Journal of Mathematics
• /
• v.26 no.3
• /
• pp.467-481
• /
• 2018

In this paper we present a postprocessing scheme for the Raviart-Thomas mixed finite element approximation of the second order elliptic eigenvalue problem. This scheme is carried out by solving a primal source problem on a higher order space, and thereby can improve the convergence rate of the eigenfunction and eigenvalue approximations. It is also used to compute a posteriori error estimates which are asymptotically exact for the $L^2$ errors of the eigenfunctions. Some numerical results are provided to confirm the theoretical results.

• Journal of applied mathematics & informatics
• /
• v.7 no.1
• /
• pp.175-181
• /
• 2000

The purpose of this to measure, with explicit constants as small as possible, a priori error bounds for approximation by picewise polynomials. These constants play an important role in the numerical verification method of solutions for obstacle problems by using finite element methods .

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.567-574
• /
• 2006

We present applications of MLS-based finite elements, which enable us to easily treat highly complex nonmatching finite element meshes and discontinuities. The shape functions of MLS-based finite element can be easily generated with the aid of Moving Least Square approximation on the parental domain. The major advantage includes that the position of element nodes as well as the number of the element nodes can be conveniently adjusted according to the nature of the problems under consideration, so that finite-element mesh is straightforwardly adapted to evolving discontinuities and. interfaces. Furthermore, we show that the present MLS-based finite elements are efficiently applied for elastic-plastic deformations, wherein the implicit constraint of incompressibility should be properly handled.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.1
• /
• pp.321-341
• /
• 2013

In this paper, we discuss the a posteriori error estimates of the semidiscrete mixed finite element methods for quadratic optimal control problems governed by linear hyperbolic equations. The state and the co-state are discretized by the order $k$ Raviart-Thomas mixed finite element spaces and the control is approximated by piecewise polynomials of order $k(k{\geq}0)$. Using mixed elliptic reconstruction method, a posterior $L^{\infty}(L^2)$-error estimates for both the state and the control approximation are derived. Such estimates, which are apparently not available in the literature, are an important step towards developing reliable adaptive mixed finite element approximation schemes for the control problem.