• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.98-102
• /
• 1994

There are many difficulties in automatic polishing for die & mold surfaces. Even though the process has been studied in the past 15 years, it has not been achieved yet, but by the process of actual hand work of well-skilled workers. A new magentic assisted polishing process, which is one of the potential method for automation of surface finishing has been studied in the past 10 years by colleagues. The process has many merits, but on the other hand also has demerits, one being low efficiency of gridability by comparision with grinding wheel polish. Therefore, some attempts were tried to improve the grindability by adopting electropolishing, ultra-high speed milling, 5-axis controlled machine etc... most recently by collegues. This study also aims to improve the efficiency of polishing by introducing the easily-polished shape surface milling method equalizing the tool feed per tooth to the pick feed. This milling method was experimentally confirmed to have sufficient grindability to polish milled surface (with 10 .mu. mRmax surface roughness) into mirror surface (with 0.4 .mu. mRmax surface roughness).

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.24-44
• /
• 2007

Cylindrical grinding is one of the important metal cutting processes used extensively in the finishing operation of discrete components. The inherent high cutting temperature in grinding if not controlled may lead to rapid tool wear, which in turn will lead to dimensional inaccuracy. The very nature of the grinding mechanism in material removal impairs the grounded surfaces by inducing residual stress, micro cracks and other thermal damages at the machined surface. This paper is an attempt to review some of the surface integrity issues in cylindrical grinding taken up and reported by number of researchers over the years. This review may have been planned to be useful to the researchers and other professionals interested to work on grinding.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.131-151
• /
• 2006

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. Metso Paper has placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selection the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine and finishing area rebuilds.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.70-80
• /
• 2008

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. Metso Paper has placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selecting the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine and finishing area rebuilds.

• Textile Coloration and Finishing
• /
• v.3 no.1
• /
• pp.46-56
• /
• 1991

신합섬이라고 불리우고 있는 섬유들의 화학적 분석결과는 모두 PET 고분자라고 알려져 있으나, 섬유로서의 그 물성은 종래의 regular PET 섬유와는 너무나도 다르다는 것은 누구나가 다 잘 알고 있다. Polyester가 옷감용소재로 등장했던 시기의 특징은 Wrinkle free, Work save, Wash and wear의 3W성이었다. 옷감용소재 직물이 지금처럼 풍부하지 못했던 당시로서는 질기고 긴 수명의 성능을 원했고, 또한 3W 성은 전기세탁기의 보급에 따라 polyester용 의류시대를 개척한 요건이 되기도 했다. 신합섬은 천연섬유에 없는 특성을 창츨하여, 지금까지의 연구대상이었던 천연섬유의 모방이 아닌, 물성이나 기능의 추구에 의한 새로운 멋과 입음새를 창조하는 것을 목표로 하고 있다고 할 수 있으며, 일본의 경우는, 직물 태(handle)의 정밀한 제어가 가능한, 이론적 해석법이 개발되어 응용되고 있는 단계로 보이나. 이러한 직물 태의 제어기술은 새로운 제품의 창출과 관계되는 기업의 knowhow인 관계로 공개되지 않고 있다.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.1-5
• /
• 1992

A study was performed to measure the heavy metal concentrations of suspended particles in iron castings during February, 1990. The heavy metal concentrations were analyzed using patricles atomic absorption spectrophotometer. The results were as fellows 1. The concentrations of suspended paticles by casting process were at furnace 4.19mg/m$^{3}$ at pouring 2.93mg/m$^{3}$ at nonferrous furnace 3.90mg/m$^{3}$, at molding 1.17mg/m$^{3}$, jung ja 2.23mg/m$^{3}$, desanding 5.42mg/m$^{3}$, sand treatment 4.82mg/m$^{3}$, finishing 1,20mg/m$^{3}$. 2. Among the total of 8 iron casting workplaces, the concentrations Fe of furnace was 0.36mg/m$^{3}$, Cu of nonferrous furnace 0.02mg/m$^{3}$, Pb of pouring 0.02mg/m$^{3}$, Cr of desanding 0.01mg/m$^{3}$ and Mn of furnace 0.03mg/m$^{3}$.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2016

Vernacular perspectives had been ignored in the movement of modern architecture. This study's purpose was to review vernacular perspectives and to identify vernacular characteristics of earth architecture. Six representative contemporary earth architects were selected, and then their works were analyzed. Themes of vernacular architecture based of Frampton's critical regionalism were emerged. Findings were as following: 1) constructed by considering the local climate and the region's natural characteristics, 2) constructed with local materials seeking integration of structure and finishing work, 3) having tectonic form included regional characteristics, 4) creating space of various senses and expression of texture through earth modeling, 5) presenting homogeneity of sense of place between site and architecture, and 6) pursuing ecological and sustainable architecture. These characteristics of contemporary earth architecture reflect the vernacular architecture inherited continually in architectural history. Therefore, contemporary earth architecture has been in line with contemporary architecture aiming for sustainability.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.153-156
• /
• 2004

As architects and interior designers work farther and farther afield, so the connection of buildings to the particular place they are constructed becomes increasingly. Also, during the past twenty years they have made a habit of asking probing and often uncomfortable questions about how architectural conventions force patterns of behavior. In place of bricks and mortar, they have mixed store, office, clinic, and residence. In this project, the buildings consist of pharmacy, store, dental clinic, oriental clinic and residence. This building was designed by architect to have panoramic views. The view of surrounding road from every wall becomes a constant point of reference, a back drop against which the whole house revolves. Now, all the words can be suitable for describing the oriental clinics. But the oriental clinics of these days may construct the unintentional common image, may be because of the clients sense about the finishing materials or colors in vogue. The Importance of identity in the design of oriental clinic becomes higher increasingly, and with the same reason, the conviction of interior designer.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.644-645
• /
• 2006

TiC-and Ti(C,N)-based cermets are excellent in semi-and final finishing of work piece during cutting operations. Typical microstructure of the cermets is a core/rim structure. The undissolved Ti(C,N) cores contribute to their high hardness while the rim phases, (Ti,M1,M2)(C,N)-type solid solutions, play great roles in enhancing the toughness. In this paper, various ultrafine pre-mixed MeC-Ni powders were synthesized and the powders were sintered or hot pressed after mixing in order to control the size and volume fractions of core and rim phases in the system. This paper will present the factors determining the microstructure along with mechanical properties.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.116-117
• /
• 2019

In this research, Proctor insertion resistance test values and Durometer A type hardness values were compared and analyzed between the setting times of the concrete using CGS for Fine Aggregate, and the results are summarized as follows. 1) The Proctor penetration resistance test value and the hardness value of Durometer A type showed a high correlation in the form of a curve. 2) About surface finish The resolution exceeding the hardness value of the Durometer A type uses about 25 HD, and in the case of termination, about 35 HD, and is considered to be effective for determining the surface finishing work time. The possibility to do is expected.