• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1995년도 추계학술대회 논문집
• /
• pp.24-29
• /
• 1995

A recently developed finishing process using rotating magnetic field is known to be very efficient for the finishing of parts such as vacuum tube, sanitary tube, etc., which are difficult to be finished by the conventional finishing methods as they are generally curbed tubes. But, the finishing system using rotating magnetic field have the defect that is the cross section of workpiece only circle because of internal rotating tool. Therefore, new finishing process of the workpieces which cross section are not circle is important and required. magnetic abrasive jet machining is a new concept finishing process. It is the precision internal finishing method using working fluid mixed with magnetic abrasives, which is jetted into the internal surface of tube. And magnetic poles are equipped on external surface of tube. In this study new concept finishing process or, magnetic abrasive jet machining system was developed. machining condition was predicted using simulation and some characteristics of the finishing process was analyzed.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.159-165
• /
• 2000

This study surveys the fabric mechanical properties according to the weaving design & finishing conditions of wool fabrics for quality control in the process. For this purpose, 8 kinds of Twill groups and 3 kinds of Plain groups weave fabrics, totally 428 woven fabrics are prepared with change of the yarn count, density and finishing method. Fabric thickness, bending rigidity, extensibility, shear rigidity, formability of the fabrics were measured and discussed with weaving design & finishing conditions.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.74-78
• /
• 1997

This study was performed to obtain the basic data of the effect of antimicrobic finishing on chrome-tanned leather for apparel. This study was to examine the effect of conditions of antimicrobic finishing on content of antimicrobic agents in the specimen by analysis and on the antimicrobic activity of specimens by means of shake flask test. The optimum conditions of antimicrobic finishing were found to be ; the concentration of Si-QAC-0.5%(o.w.f.), treating time-30minute, and drying method-air drying.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1225-1228
• /
• 2001

The purpose of this study is to develop for finishing method of concrete structures applying metal spraying system. In the experiments, the pull out tests were conducted using the specimen which was applied by various surface treatment of concrete substrate. As a result, it was confirmed that the adhesion strength of metal spray was effected by surface condition of concrete and the construction of primer or the coarse surface agent to the concrete substrate is very effective to the new finishing method of concrete for the metal spraying system.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.58-63
• /
• 2010

A new contact force estimation technique is proposed. Keeping the contact force at a certain level between finishing tool and the object is essential since the quality of the finished surface is very sensitive to the contact force during the finishing process. However, the contact force measurement cannot be obtained by simply installing load cells under machine table or in the middle of tool linkage. The reason is that the weight of the machine table and the tool linkage are much heavier than the force to be measured. To that end, a method for estimating disturbance is proposed for a system that is similar to the mechanism of the finishing machine, and the same method is applied to estimate the contact force of the brush-type finishing machine. To verify the effectiveness of the proposed method, a small scale test set-up has been built and the method has been tested.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.7-12
• /
• 2005

An internal finishing process by the application of magnetic abrasive finishing has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, another method of magnetic abrasive machining in which the N and S magnetic poles are vibrated and a workpiece is rotated only is tried in a non-ferromagnetic pipe(SUS304), and its finishing characteristics is experimently investigated by various effective factors such as vibrating frequency and amplitude. From the experimental results, it is found that the vibration effects of magnetic poles on the finishing characteristics are large in internal finishing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.97-101
• /
• 1995

This paper describes a new surface finishing process which uses magnetic abrasive polishing. This is applied to automatic finishing of die & mold surface. Nowadays, most of die & mold meanufaturing procedures have been automated by the introduction of NC machine tool and CAD/CAM system. But the surface finishing of die & mold must be done by hand work of well-skilled workers. Though many attempts were tried in the past 15 years to eliminate this hand work, the automatic finishing of die & mold surface with 3D curvature has not been achieved yet. New magnetic abrasive finishing process is thought as one of the possible methods for the automation of 3D surface finishing. In order to improve the grindability of the method, ultra-high speed and 5-axis machining was introduce. The magnetic abrasive polishing which has adopted these methods was confirmend to improve the efficiencyof die & mold surface finishing.

• 한국염색가공학회지
• /
• 제21권4호
• /
• pp.46-56
• /
• 2009

In order to establish the standard manufacturing condition of PET flame retardant sheets, physicochetnical properties of the samples made by the conventional flame-retardant finishing were systematically investigated, including compatibility among flame retardant agent and finishing auxiliaries, surface property, and wicking property. From this results, the addition of washing and renapping process after the shearing process was required for the more effective in producing PET flame-retardant sheet by the standard finishing. The effect of the modification of the regular flame retardant finishing process was studied by FTIR, TGA, and flame retardancy test.

• 한국실내디자인학회논문집
• /
• 제8호
• /
• pp.39-43
• /
• 1996

Based on individual characteristics and values, human preference on interior finishing material is various . Finishing materials, however, do not seem to satisfy those characteristics and values. Given the aspects of life style and population classes, finishing materials are an important part of human life and draw much attention . As a result, there is a necessity to study them systematically. This study related finishing materials to tenants, understands the characteristics both of them, and identifies in terrelations between them in order to find out satisfaction and preference which teants have towards their finishing materials. As a result, this study is about design materials preference of tenants in apartment houses for the purpose of improving quality of finishing materials. A practical study method of questionnaire research was used to find out tenant's opinions on components of interior space.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.241-244
• /
• 2002

Deburring is conducted using MAF(magnetic abrasive finishing) method. Magnetic inductor is designed and manufactured to generate proper magnetic induction far deburring the burr formed in drilling SM45C. Rotational speed, table feed rate, grain size of powder and working gap are changed to investigate the effect on deburring.