• 한국정밀공학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2006

ELID(Electrolytic In-process Dressing) grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP(Magnetic Assisted Polishing) has been used as polishing method due to its high polishing efficiency and to its resulting in a superior surface quality. This study is describing an effective fabrication method combining ELID and MAP of nano-precision mirror grinding for glass-lens molding mould. It also presents some techniques for achieving the nanometer roughness of the hard metals, such as WC-Co, which are extensively used in precision tooling material.

• 한국염색가공학회지
• /
• 제13권1호
• /
• pp.23-31
• /
• 2001

To improve the dyeability and colorfastness of cotton and silk fabric dyed with natural dye of safflower, cotton and silk fabrics were pre-treated with different mordants such as halliic-acid, alum, brine and tannic-acid. Also, to investigate the effect of finishing treatment of fabrics on dyeability, cotton was treated with chitosan and mercerized before dyeing. L, a, b, ΔE and colorfastness(light, Laundry, sweat) of each samples were measured and compared. Mordant treatment didn't improved significantly dyeability and colorfastness on cotton and silk. But, on cotton mercerization and chitosan treatment improved dyeability and colorfastness. To compare the efficiency of extracted dye and Powered dye, extracted red dye of safflower prepared as powder. Cotton and silk were dyed with dyeing solution which made with powdered dye according to different concentration. Efficiency of powdered dye was found out lower than extracted dye solution.

• Journal of Animal Science and Technology
• /
• 제46권3호
• /
• pp.459-468
• /
• 2004

본 연구는 우리 나라에 건축되어져 있는 개방육성비육돈사와 무창육성비육돈사의 환경효율을 검증하고자 하였다. 본 실험은 실험돈사에서 겨울철과 여름철로 나누어 실시한 실험결과는 다음과 같다. 1) 무창육성비육돈사는 외부의 기온 변화가 심하더라도 돈사내부의 온도는 외부기온의 영향을 받지 않고 여름철 24.8${\sim}$29.1$^{\circ}C$, 겨울철 17.9${\sim}$23.1$^{\circ}C$를 유지하였으나 개방육성비육돈사는 여름철 24.7${\sim}$32.3$^{\circ}C$, 겨울철 14.5${\sim}$18.2$^{\circ}C$를 유지하여 온도효율이 낮았다. 2) 암모니아 농도를 측정한 바 개방육성비육돈사는 여름철 9.31${\sim}$16.9 mg/$\ell$, 겨울철 5.1${\sim}$19.7 mg/$\ell$로 측정되었으며, 무창육성비육돈사는 공기입기 및 배기의 효율적인 구성으로 여름철 7.9${\sim}$16.1 mg/$\ell$, 겨울철 3.7${\sim}$9.6 mg/$\ell$를 유지하여 개방육성비육돈사 보다는 낮게 나타났다. 3) 무창육성비육돈사는 돼지생육 공간(하부)의 공기유속이 겨울철 최소환기(5%) 수준으로 하였을 때 0.0${\sim}$0.87 m/s 였으며, 여름철 최대환기(95%) 수준에서는 0.1${\sim}$2.73 m/s로 분포되어 여름철 및 겨울철의 무창육성비육돈사내 공기유속이 개방육성비육돈사보다 양호하였다. 4) 여름철 비육돈출하시(평균 110 kg 전후)의 체중은 개방육성비육돈사는 100.2인데 비하여 무창육성비육돈사에서의 체중은 107.3kg으로 약 7kg 정도의 차이로 빠른 증체를 가져왔는데, 이것은 외기의 영향을 영향을 크게 받지 않고 일정한 환경을 유지해 주어 스트레스를 줄여 주었기 때문으로 판단된다.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.38-44
• /
• 2004

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of non-ferromagnetic pipe. In this paper, an abrasive slurry circulation system was designed and manufactured. As a result, it was found that a fine inner surface of pipe was available by the use of these machining methods. The basic machining characteristics of pin-type magnetic tools were analyzed experimentally. In addition, the experimental results show that pin-type magnetic tools have more machining efficiency than Iron particles as magnetic tools.

• 한국BIM학회 논문집
• /
• 제3권2호
• /
• pp.1-9
• /
• 2013

Currently, various studies and applications related BIM based quantity take-off have been attempted, because of the accuracy of cost estimating and reliability by using the BIM model information in automatical calculation. Finishing works that have a large number of various types and materials need the higher accuracy and reliability on the BIM-based quantity take-off. Therefore, this study compared and analyzed 2D and 3D based quantity through Test-bed and determine the cause of the quantity difference. This verified the accuracy and efficiency in the BIM-based quantity take-off for finishing works. Also this study has been proposed opinions for calculating the exact BIM-based quantity take-off.

• Asian-Australasian Journal of Animal Sciences
• /
• 제2권3호
• /
• pp.505-506
• /
• 1989

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.681-685
• /
• 2000

A computer software was developed in our laboratory to automatically control the pigs environment by the image analysis system (IAS), which monitors and analyzes the pig's behavior and feeds the results back to the computer hardware. Three feeding trials were conducted with growing pigs ($L{\times}Y$) to test the effectiveness of the IAS under various seasons. In all three trials, the open-sided conventional pens with half-slatted floor were used as controls; for the IAS treatment, fully-slatted floors were used in the windowless pens. Experiment 1 was conducted in the winter for 30 d with 24 growing pigs. There were two treatments (Conventional vs. IAS), and three pens (replicates) per treatment. During the growing period, the feed efficiency was significantly (p<0.05) improved by the IAS. In addition, the pigs reared under the IAS during the growing period displayed better growth rate during the finishing period than did the pigs reared under the conventional conditions. Experiment 2 was conducted in the summer for 30 d with 24 growing pigs. The experimental design was the same as Experiment 1. During the finishing period, all the pigs were kept in conventional open-sided pens until their market weights to evaluate their carcass characteristics. During the growing period, the growth rate and feed efficiency of the pigs in the IAS was better than those of the control pigs. In addition, various carcass characteristics were significantly improved by the IAS rearing during the growing period. Experiment 3 was conducted with 30 growing pigs for 30 d in the spring. The experimental design was the same as Experiment 1. No difference was found in growing performance between the control and IAS pigs. It could be concluded that the IAS is effective in providing optimum conditions for the growing pigs in summer and winter seasons. In addition, providing an optimum environment during the growing period results in improved growth rate, feed efficiency, and carcass qualities for the finishing pigs.

• Journal of Animal Science and Technology
• /
• 제55권4호
• /
• pp.289-293
• /
• 2013

The objective of this study was to assess the effects of dietary carbohydrases on growth performance, nutrient digestibility and blood characteristics in finishing pigs. A total of 90 pigs [(Landrace ${\times}$ Yorkshire) ${\times}$ Duroc] (initial BW = $56.15{\pm}1.26kg$) were used for a 35 d feeding trial. The dietary treatments included: 1) CON (control diet), 2) MIX (CON + mixture with ${\alpha}$-galactosidase and ${\beta}$-mannanase 0.05%) and 3) MAN (CON + ${\beta}$-mannanase 0.05%). There were six replications per treatment with five pigs per pen. The average daily gain (ADG) in MIX was higher than in CON (p<0.05). No significant differences were noted in the average daily feed intake (ADFI) and feed efficiency (G:F) among dietary treatments (p>0.05). Apparent total tract digestibility (ATTD) of dry matter (DM) and energy (E) in MIX increased (p<0.05) relative to CON and MAN. The ATTD of nitrogen (N) in MIX was higher (p<0.05) than in CON. No differences in red blood cells (RBC), white blood cells (WBC), lymphocytes and IgG concentrations were observed among dietary treatments (p>0.05). In conclusion, the addition of the mixture of carbohydrases (${\alpha}$-galactosidase and ${\beta}$-mannanase 0.05%) increased ADG and nutrient digestibility in finishing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권6호
• /
• pp.811-816
• /
• 2000

Five experiments were conducted to evaluate blood urea nitrogen (BUN) as a potential index of feed efficiency (G/F) and lean growth in growing-finishing pigs. Exp. 1 was conducted to examine the relationship between feeding protocol and BUN values. Fasted-refed pigs exhibited BUN peaks 3 h post-prandially while those given ad libitum access to diet had inconsistent BUN patterns in 10 h blood sampling with an 1 h interval. In Exp. 2 and 3, it was revealed that the peak BUN values were negatively correlated (p<0.01) with G/F in both barrows and gilts at 20 kg body weight (BW) and 50 kg to 90 kg BW. In Exp. 4, it was found that BUN values between 55 kg and 70 kg BW, when lean gain is maximized, were best correlated with average daily lean gain (ADLG). In Exp. 5, 18 barrows and 21 gilts were used to examine the relationship between BUN values at 65 kg BW and ADLG from birth to market weight. The BUN values at 65 kg BW and ADLG were negatively correlated (p<0.01) in both genders. These experiments demonstrated that there was a correlation between peak BUN values, and G/F and ADLG under specific circumstances.

• 한국주거학회논문집
• /
• 제23권3호
• /
• pp.71-78
• /
• 2012

This study analyzed metaphorical characteristics of composite materials in terms of a visual aspect on a new material that is applicable for housing space. The results are as follows. First, the recent trend of housing space tends to stimulate emotions of residents through visual finishing materials, and for this reason, visual expression of a new material that is applicable to finishing materials plays an important role. Second, convertibleness, association and duplicity were selected as items of metaphorical expressions through the precedent studies. Third, most of combinations of materials were shown different from the existing materials in an expressive characteristic of composite materials through analysis, and application of a technology showed a different visual effect of patterns and textures from the existing materials. This implies that visual expression and directing are being attempted using such technology on finishing materials of housing space with development of digital technologies. Fourth, for metaphorical characteristics of composite material for housing space, combination of various materials and a digital technology were applied on convertibleness. For association, a combination of materials that have each different characteristic associated with the third material, and combination with subsidiary material of optical fiber and a digital technology were appled for duplicity. Data obtained from the results of this study has high efficiency in planning finishing materials for emotional housing space in future, and it will be basic data for a study on development of new finishing materials.