• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.360-365
• /
• 1996

The purpose of this study was to evaluate the changes in the degree of conversion on a composite resin surface following heat treatment and mylar strip finishing. The effects of the time interval between the light-curing and heat-curing process were also evaluated. The composite resin surface which had been covered with a coverglass showed a lower conversion rate than the surface from which a layer of $500{\mu}m$ was ground away. The composite resin surface was definitely affected by oxygen during the heat curing process when it had not been insulated. When the composite resins were heat cured after 3 days of storage following the light curing process, the increased in the degree of conversion through heatcuring was limited.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.45-48
• /
• 2001

SL(Stereolithogrphy) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect causes excessive surface roughness and requires additional postprocess finishing such as abrasive basting which is detrimental to part geometry and time consuming. Hence paraffin coating and grinding postprocess is proposed to raise the surface quality of SL part. The paraffin which has suitable properties for the proposed postprocess is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental result, It is verified as very practical for die casting with silicon rubber mold.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.8-13
• /
• 1996

A relatively new non-traditional finishing process called Abrasive Flow Machining(AFM) is being used to deburr, polish and radius workpiece or produce compressive residual stresses by flowing an abrasive-laden viscoelastic compound across the surface to be machined. This paper presents the effects of AFM on surfaces of tool steel produced by EDM and W-EDM. Using AFM, white layer produced by EDM is erased almost equally and the amount of metal removal is significantly affected the initally machined surface condition of workpiece. The dimension of workiece is enlarged and its surface roughness is improved as AFM time is increased. The optimal AFM time can be established from the experimental results. It is considered that the grinding method lide AFM is useful to grind complex or slim geometry of workpiece even. Scanning Electron Microscopy(SEM) was used to study the surface characteristics of the workpiece before and after AFM.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.68-75
• /
• 2003

In this work, ultrafiltration(UF) membranes were prepared using polyethersulfone(PES). The polymer was dissolved in various solvent, such as N, N-dimethyl formamide(DMF), N,-dimethyl acetamide (DMAc), N,N-dimethyl sulfoxide(DMSO) and N-methyl-2- pynolidone(NMP). Each polymer solution was casted on the glass plate, and immersed into non-solvent bath. In this way finely porous UF membranes were prepared by phase inversion method. The cross sectional structure of PES membrane was asymmetric which was consist of sponge-like sublayer, finger-like toplayer, and active skin layer. From the solute rejection experiments, the molecular weight cut off of the prepared membrane in various solvent was evaluated 10,000 for DMF, 30,000 for DMAc, 50,000 for DMSO, and 10,000 for NMP respectively.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.46-50
• /
• 2004

In today's highly competitive marketplace, it is of great significance for the manufacturing industry to reduce lead-time and costs fur the product development. Since first emerged in 1986, Rapid Prototyping (RP) technology has helped successfully to reduce time and costs. Recently, RP using functional materials such as metal has been researched. However RP using the molten metal has been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish, post finishing, etc., that originate primarily from the overall deposition of molten metal for each layer. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. Also tensile and bending specimens were made by the developed RP process using projection welding and were verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.659-662
• /
• 2002

SL(Stereolithography) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect brings about excessive surface roughness and requires additional post-process finishing such as abrasive techniques that are detrimental to part geometry and time consuming. Hence a wax coating and grinding post-process is proposed to improve the surface quality of SL part. The wax that has suitable properties for the proposed post-process is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental results, This approach is considered to be very practical fur die casting with RT(Rapid Tooling) techniques.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.1
• /
• pp.11-20
• /
• 2018

Hydrophobic and Superhydrophobic surfaces are promising technology for the surface finishing of metallic materials due to its water-repellency. Realization of highly water-repellent surface on aluminum and its alloys provides various functionalities for real application fields. In order to realize the hydrophobic/superhydrophobic surfaces on aluminum and its alloys, various technologies have been demonstrated. Especially, traditional anodic oxidation for aluminum has been widely employed for the morphological texturing of surfaces, which is essential to enhance the hydrophobic efficiency. De-wetting superhydrophobic surface on aluminum provides various exceptional properties, such as anti-corrosion, anti-/de-icing, anti-biofouling, drag reduction, self-cleaning and liquid separation. Nevertheless, the durability and stability of superhydrophobic surfaces still remain challenges for their actual applications in engineering systems and industry. In this review, the theoretical/experimental studies and current technical limitations on the hydrophobic and superhydrophobic surface using anodic oxidation of aluminum have been summarized.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.32-37
• /
• 2001

Silk fabric was sputter-treated with Au, Cu, SUS, and Ti using poly(vinyl alcohol) (PVA) as a binder, and its changes in color, antielectrostatic property, airpermearbility, and rubbing fastness were investigated. Sputter-treated silk fabric had a natural color of metal target, which was deepened by treatment of PVA solution. The rubbing fastness of thin metal layer formed by sputtering was improved by PVA treatment. Au had highest rubbing fastness among the metal targets. In addition, PVA treatment posterior to sputtering resulted In higher rubbing fastness than the other treatment method. However, a reverse trend was found in antielectrostatic property. Air permeability of the sputter-treated silk fabric was improved by PVA treatment, which was highest when sputtering was conducted prior to PVA treatment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.501-504
• /
• 2014

This paper was developed and described core-process to implement low on resistance which was the most important characteristics of SJ (super junction) MOSFET. Firstly, using process-simulation, SJ MOSFET optimal structure was set and developed its process flow chart by repeated simulation. Following process flow, gate level process was performed. And source and drain level process was similar to genral planar MOSFET, so the process was the same as the general planar MOSFET. And then to develop deep trench process which was main process of the whole process, after finishing photo mask process, we developed deep trench process. We expected that developed process was necessary to develop SJ MOSFET for automobile semiconductor.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.66-66
• /
• 2003

야외 운동(outdoor activities)복에 사용되는 소재들은 외부로부터 신체를 안전하게 보호해 주어야 될 뿐 아니라 쾌적하게 유지시켜 주어야 한다. 의복착용시 쾌적감에 결정적인 영향을 미치는 인자는 몸의 열적 평형상태를 유지하기 위한 수단인 수분전달 특성이다. 본 연구는 여러 종류의 야외 운동복용 직물에서의 수분전달 현상을 조사하여 규명하므로써 이 직물들이 실제 의복생활에 응용될 의복계 (clothing system)를 형성하였을 때의 수분전달 현상을 설명하고자 하는 기초연구이다. 연구의 결과는 base layer용, mid layer용 직물들이 shell layer로 쓰이는 waterproof breathable 직물보다 수분 전달률이 높았으며, waterproof breathable 직물의 수분 전달률은 microfibre 직물, PTFE-laminated 직물 그리고 polyurethane coated 직물 순 이었다. 또한 polyurethane 직물에서는 back coated 직물이 face-coated 직물보다 수분 전달률이 높았다.