• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.383-391
• /
• 2016

Recently, the hospital infection has emerged as a major concern in the media. In everyday life, but not good if the infection refers to infection with the population living in the hospital. The case with which the equipment is used in a hospital if the person mediating and mediated, patients sometimes with the pathogen causing the disease to their patients. disease in our country for some time, and Mers is finished, large hospitals are taking place is a change in hygiene and operating systems. The Mers is spreading visits and influenced the patient or patient care. And the hygiene to limit the visiting hours for hospital infection prevention and stabilization of the patient. The infection, especially infection among patients and patients but a number of factors, from the emergency room or intensive care unit of frequent hospital contacts between patients with infection and of course, furniture for storing multiple people to use in the ward also become a source of infection. Hospital, another patient is a Cabinet that used to accept the next patient will cause a secondary infection and the role of infectious agents. Therefore, the general public will have a nervousness in the hospital, also medical care needed to avoid the problem occurred. This study examines such issues for the Cabinet of the hospital with a secondary infection is concerned, eco-friendly and hygienic storage furniture and one-off development that will help to improve the hospital environment for research purposes.

• Journal of Environmental Impact Assessment
• /
• v.16 no.4
• /
• pp.251-265
• /
• 2007

In this study, the influence of the construction of a large sized building on the flow and level of groundwater in a metropolitan area was investigated with simulation model MODFLOW for a selected area located in Gangseo-gu, Seoul, where a large business center was scheduled to be built. It was simulated that the groundwater level in the study area was suddenly lowered by the construction of a large building and groundwater in the surrounding area fast flowed into the study area. And even after the construction finished, the falling down of groundwater level consistently continued in some degree. The flow state of groundwater appeared to be the same in both cases where a soil cement wall is applied and where it is not during the construction. But for the case of application of a soil cement wall as the amount of groundwater flowing into the study site became reduced, it was estimated that the time for underground watershed getting far away from the site was also reduced and the influence of a building construction on the surrounding groundwater became reduced. Thus, it is deemed necessary that recharging the spilled ground water and rainfall into the construction area to lessen the abrupt change in flow and level of ground water should be considered in design of construction of a large sized building in a metropolitan area.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.73-84
• /
• 2006

Standard safety management cost system was established in 1988 as a decree Number of 88-13, first time. And then, it has been revised fourteen times, up to now. A lot of practical investigations have been made for the revision but many problems at sites are continued to be put out so that it should be revised. This study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. Budget and actually performed amount of safety management costs in this study are investigated. costs for temporary work which is clarified in Japan is collected in order to compare domestic cost rate with Japanese one related to the total project amount. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.41-49
• /
• 2009

Smart Card is currently more popular in mobile communication, and smart card with java card platform becomes a standard choice. Java card has a problem that it gets lost working data when power is off. Transaction is the idea to solve a problem of data loss, but it accepts only one transaction process, and other transaction process need to hold until the current working transaction is finished. This might be a factor to drop the Java card's performance. In this paper, we define a rule of dual-lock which can run transaction at multiple transaction buffer as a method for a better java card performance, and we suggest this rule to improve a capability of transaction process. From this research, we are able to improve the data stability, reduce the java card transaction delay time, and get a higher processing speed of java card.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.55-62
• /
• 2004

This study was carried out to investigate the formation of DBPs(Disinfection By-products) such as trihalomethane(THMs) and haloacetic acid(HAAs) by chlorination in raw water and finished water of Water Treatment Plant(WTP). The formation of THMs was increased with the increase of pH and reaction time. HAAs was found as a high formation at a pH 7 and low formation at pH 9. THMFP(Trihalomethane Formation Potential) was the highest formation potential in raw water of Pu-1 and the lowest in raw water of Pa-1. In case of HAAFP(Haloacetic acid formation potential), So-1 showed the highest value, while Pa-1 showed the lowest value. It was investigated the relationship between HAAs and organic matters which were described as DOC(dissolved organic carbon) and $UV_{254}$. In both DOC and $UV_{254}$ versus HAAFP, Pu-1 showed the good correlation coefficients($r^2$) with 0.95 and 0.84, respectively. For three WTP investigated, DBPs(THMs + HAAs) was shown over the range of $42.00{\sim}49.36{\mu}g/L$. This result might be due to the different characteristic of organic matters in raw water and the difference of chlorine dosage for a water treatment.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.33-38
• /
• 2012

A LEO Satellite performs automatic initial operations by FSW after separation from a launch vehicle. After initial operation by FSW is finished, preparation for normal operation is performed by ground during bus initial activation and checkout phase. First of all, we check state of health of the satellite including solar array deployment status. After then, each unit of spacecraft bus is activated and checked. After activation and checkout of every units used for normal operation, we check maneuver performance for imaging mission and orbit maintenance performance. Because the Bus IAC is performed during limited ground contact time, every detailed procedure must be designed considering ground contact. Therefore, the Bus IAC procedure is separated into several parts based on ground contact duration. In addition, the procedures for every possible operation including expected situation as results of IAC procedures and unexpected contingency situation must be prepared. The contingency operation is also designed based on ground contact duration. The LEO satellite was successfully launched and the Bus IAC was successfully performed. In this paper, we explain design concepts and execution results of Bus IAC.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.33-58
• /
• 2007

Capital punishment is a system which is not finished simply as one of interim penalty but does away with one person's existence eternally. It is not only opposite to the existential humanism but also contrary to social welfare's goal like social integration. Therefore, this study tries to find out the issues related to capital punishment and further tries to draw out the rightness of capital punishment abolition by critically reviewing the capital punishment system on the basis of the value and philosophy of correctional welfare. In brief, capital punishment is possible only when we negate the inviolable fundamental right which is called life right, and deny the human life existence which surpasses space and time. As long as we can not deny the macroscopic viewpoint to search out the basis of human behavior in the social system which is called culture and society, capital punishment system is contrary to the philosophy of welfare that total society is responsible for guiding members of society to pursue self realization on the basis of value like social solidarity and human dignity. Also, it is against the objective of correctional welfare to head toward special prevention by positive correction and rehabilitation. Capital punishment system ought to be abolished properly.

• Journal of Korean Academy of Nursing
• /
• v.24 no.4
• /
• pp.652-665
• /
• 1994

This study was done to investigate the changes in the quality of life(QOL) of patients who received radiation therapy after surgery for breast cancer. For this purpose, 35 patients were interviewed using a questionnaire. They were followed over 8 month period from the beginning of radiation therapy. Changes in the QOL, side effect of the RT(radiation therapy), depression were measured. The results can be summarized as follows : 1. The mean score of the side effect of RT increased significantly over the period of RT. When the RT was completed, the QOL score was the low-est, and the depression score was the highest, but the changes of these scores were not statistically significant. 2. When the 6-week RT was finished, the QOL was significantly correlated with QOL of the beginning of RT, depression at RT completion and age. At three months after the completion of RT, the QOL was significantly correlated with QOL of the beginning of RT, depression and side effect of RT at three months after the completion of RT. At six months after the completion of RT, the QOL was significantly negatively correlated with age. 3. In the stepwise multiple regression analysis, the major influencing variables on the QOL were various according to the time lapse after the RT. The QOL at the completion of RT was predicted by the QOL at the beginning of RT, depression at the completion of RT and age. The QOL at three months after the completion of RT was predicted by the QOL at the beginning of RT and side effect of RT and depression at three months after the completion of RT. The QOL at six months after the completion of RT was predicted by age. This study suggests that continuous nursing care be required for improving the QOL of breast cancer patients not only during the RT period but also for a long term after the completion of RT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.138-144
• /
• 2010

Tachyon primary system which introduces recently is a high performance supercomputer that composed with AMD Barcelona nodes. In this paper, we will verify the performance and parallel scalability of TachyonIn by using multi-zone NAS Parallel Benchmark(NPB) which is one of a program with hybrid parallel method. To test performance of hybrid parallel execution, B and C classes of BT-MZ in NPB version 3.3 were used. And the parallel scalability test has finished with Tachyon's 1024 processes. It is the first time in Korea to get a result of hybrid parallel computing calculation using more than 1024 processes. Hybrid parallel method in high performance computing system with multi-core technology like Tachyon describes that it can be very efficient and useful parallel performance benchmarks.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.599-603
• /
• 2003

This paper present an error compensation system and On-Machine Measurement(OMM) system for improving the machining accuracy of ultra-precision lathe. The Fast-Tool-Servo(FTS) driven by a piezoelectric actuator is applied for error compensation system. The controller is implemented on the 32bit DSP for feedback control of piezoelectric actuator. The control system is designed to compensates three kinds of machining errors such as the straightness error of X-axis slide, the thermal growth error of the spindle. and the squareness between spindle and X-axis slide. OMM is preposed to measure the finished profile of workpiece on the machine-tool using capacitive sensor with highly accurate ruby tip probe guided by air bearing. The data acquisition system is linked to the CNC controller to get the position of each axis in real-time. Through the experiments, it is founded that the thermal growth of spindle and tile squareness error between spindle and X-axis slide influenced to machining error more than straightness error of X-axis slide in small travel length. These errors were simulated as a sinusoidal signal which has very low frequency and the FTS could compensate the signal less than 30 m. The implemented OMM system has been tested by measuring flat surface of 50 mm diameter and shows measurement error less than 400 mm