• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.23-32
• /
• 2005

This study attempts to address the development processing of yarn-dyeing jacquard design by using jacquard textile design professional CAD system to create high valued worth products. To carry out this purpose, two kinds of necktie samples were designed and each of them was different in three types of weaving method. The results are as follows; All over type is appropriate when the motive's size is small. And the work can be finished within short time and design can be illustrated by basic jacquard system. However, one point type can represent rather big and audacious motive but it needs lots of working hours and jacquard system. Though the motives are identical, showed many changes in cubicle representation according to weaving methods and the structure. To express simple and modest design, single fabric woven is suitable and in the need of colorful and technical design, expressing by double weft cloths and triple weft cloths rather than single fabric woven are better to give creativity and colorfulness. For the production of jacquard design, cad system using ability is important but the understanding and study of the whole process of weaving development should be made.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.272-275
• /
• 2008

In case a middle school music room locating in Iksan City, this space had been finished its construction work with the indiscreet sound-absorbing materials despite the music lesson is taught thereat. Accordingly, when music lesson since it sounds aridly due to insufficiency of echo and sound-volume feeling in music appreciation or music performance sound, there is some difficulty in the music lesson. For the purpose to control the obstructive factors owing to such short Reverberation Time, it optimizes the acoustic factor using Acoustic Simulation after arrangement of Acoustic Design, it has conducted a Psycho-acoustics Experiment using the Auralizational Technique that can experience the Virtual Acoustic Field at its designing stage. As the result of investigation about the acoustic satisfaction on the relevant subject space and the satisfaction with regard to the pertinent each items, it was known that the valuation on acoustic performance was evidently improved at 'after-reformation' than 'before-reformation'. It is considered that such material could be utilized as the useful material that can improve the architectural acoustic factor when construction and renovation of any middle school music room in the future.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.173-176
• /
• 2007

The characteristics of the tool system give many effects into the costs and qualities for the finished components. This study proposes a new method for manufacturing of high manufacturing productivity, production process reduction and low cost through back pressure forming. The Lock-up hub is manufactured through many processes, such as upsetting($1^{st}$ Forming), piercing, direct extrusion($2^{nd}$ Forming), final sizing process($3^{rd}$ Forming). In this study, process design for closed-die forging of a Lock-up hub used for a component of automobile transmission was made using three-dimensional finite element simulations, and the strain distributions and velocity distributions are investigated through the post processor. The rigid-plastic finite-element method for back pressure forging has been used in order to reduce development time and die cost. Using the FEM simulation, we found the optimum value of back pressure. The prototypes of Lock-up hub parts were forged into the net-shape. In the experiment, lead precision of tooth are measured by the CCMM(Contact Coordinate Measuring Machine). The dimensional accuracy of forged part was improved up to the 40% when back press was applied.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.46-55
• /
• 2014

With regard to the basic safety and health education in construction industry issued on January, 26, 2012 by Occupation Safety And Health Acts, this study conducted a survey with self-administered questions for workers in the construction field in order to comprehend the problems since introduction of basic safety and health education. By analyzing the effectiveness of the safety and health activities, this study sought to reduce the trials and errors as well as to secure the improvement toward the early settlement of the basic safety and health education in construction industry. As a result of the question investigation, the survey respondents in the field sites who finished the basic safety and health education showed positive attitudes toward the improvement of safety awareness and the prevention of accidents. They also needed constant implementation of the education. At the same time, the government should improve the education program with strong policies to secure the effectiveness of the basic safety and health education in construction industry.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.599-602
• /
• 2005

본 연구에서는 패션 디자인 분야에서 완성된 의상의 모델 사진을 활용해 다양한 원단을 직접 Draping함으로써 새로운 디자인을 창출할 수 있고 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인 할 수 있도록 하였다. 또한 모델과 원단 이미지에 대한 데이터베이스를 구축하여 실시간으로 Mapping 결과를 확인할 수 있으며, 모델 사진과 원단 이미지의 자연스러운 Draping을 구현하기 위해 영역(Path)추출 알고리즘, 워프(Warp)알고리즘, 명암 추출과 적용 알고리즘을 이용한 2.5D Mapping 시스템을 개발 하였다.

• 한국산학기술학회논문지
• /
• 제5권4호
• /
• pp.315-320
• /
• 2004

디지털의 기술은 그동안 산업사회에서 두텁게 형성되었던 시ㆍ공간의 패러다임을 무너뜨림으로써 사회관계를 근본부터 변화시키는 혁명적인 대전환을 가져오고 있다. 또한 지식과 정보기술의 가치는 모든 사회 가치를 결정하는 지표가 되고, 사회 중심의 결정 인자이며, 지식과 정보기술의 기반은 교육에 의해 좌우되고 있는 실정이다. 따라서 본 연구는 다가오는 교육개방에 능동적으로 대처하면서 정보기술 교육경쟁력을 강화하고, 산업체에서 요구하는 직업교육의 강화 및 현장기술 인력을 육성하기 위한 정보기술의 특성화된 교육과정 모형 개발과 지침을 제공하는데 그 목적이 있다. 또한 산업체에 취업 후 별도의 재교육 없이도 정보기술관련 해당분야의 현장업무에 적응할 수 있는 특성화된 전문 인력을 교육하기 위한 교육과정 모형 개발과 각 대학에서 적합한 분야로 집중적으로 교육하는 모듈식 형태의 교육과정 설계 및 개발에 그 목표가 있다.

• 한국물환경학회지
• /
• 제20권3호
• /
• pp.275-280
• /
• 2004

This study was performed to investigate the disinfection efficiency and the formation characteristics of disinfection by-products(DBPs) by chlorination in the sewage effluent. The effluent was sampled from the sewage treatment plants operated in the activated sludge process and the advanced sewage process. The type of DBPs investigated were Trihalomethanes(THMs), Dichloroacetonitrile(DCAN), Chloral hydrate(CH), Dichloroacetic acid(DCAA), Trichloroacetic acid(TCAA). Major findings are as follows. First, the optimum injection concentration for chlorination in sewage effluent were found to be in the range $0.5{\sim}1.0mg\;cl_2/L$. Also, It was found that the chlorine dosage in the effluent of activated sludge process was higher than in the effluent of advanced sewage process. Second, the maximum formation concentration of THMs were $12.7{\mu}g/L$. The THMs formation reaction was finished in a short time of several seconds and chloroform was mainly formed. Also, it was found that the concentration of ammonium nitrogen is higher, the concentration of THMs is lower. Third, it was found that DCAA and TCAA were mainly formed as DBPs by disinfection.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.84-90
• /
• 1999

The finishing process for dies and molds is directly related to finished surface quality, but many parts of process depend on human labor which needs much time and value. So automatic finishing machine has been produced for dies and molds, and applied widely for finishing process. Conventionally finishing machine has applied resin bonded finishing pad as a tool, but the removal ability of pad decreases greatly as finishing process goes on. In the finishing mechanism for dies and molds, finishing process is affected severely by cutting process, so can be divided into removing cusp and smoothing surface process. So, this study investigated the application of cast iron bonded diamond pellet for press dies, which is considered to have better characteristics than the other metal bonded pellets. The finishing characteristics were compared the between finishing pellet and pad. And finishing performance was appraised as the several cutting surfaces.

• Journal of Nutrition and Health
• /
• 제27권3호
• /
• pp.272-280
• /
• 1994

The weaning practice of infants from 5 to 12 months of age in the area of Chunchon, Kangwon-do was studied. Subjects were divided into 2 groups depending on residential area, monthly family income and mother's educational level. Parents of group 1 (n=90) received higher education and more monthly family income than those of group 2(n=32). The family income was significantly higher in group 1 than in group 2. Mother's educational level has been markedly improved over 10 years, which affected the feeding methods before weaning in both groups(P<0.05). Group 1 appeared to be bottle-fed. Bottle-and mixed-feeding were mainly due to lack of breast milk. 95.6% of group 1 and 71.9% of group 2 started weaning before the age of 6 months and only 16.4% were completely finished regardless of the groups. Commercially prepared foods were used more than home-made for first given-supplementary food. 82.2% of group 1 received fruits and 84.4% of group 2 cookies/crackers as their main supplementary foods. As the motivation of onset of weaning, 'for baby's health and nutritional status' was the most common. These results demonstrate that there are distinct differences between these 2 groups in 1) the feeding methods prior to weaning, 2) time of onset of weaning, and 3) main supplementary foods, influenced by mother's educational level, economic purchasing power, or subjects birth order.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.27-33
• /
• 2019

The aviation industry has grown beyond the simple processing and assembling of aircraft parts and now designs and exports finished aircraft. In this study, the vertical CNC milling rotational speed and feed rate were parameters to investigate the life of tools according to their shape: (flat, round, and ball end mill) in the rough cutting of titanium. These tools are widely used in aircraft manufacturing and assembly. The purpose of this study is to measure the cutting temperature generated during the cutting process and calculate the rate of tool wear. This will be accomplished by measuring the tool weight before and after cutting the specimen and to compare it with the results of previous studies. Our study showed that the maximum cutting temperature increased as cutting time, tool rotational speed, and feed rate increased. The highest cutting temperatures were recorded for the ball, round, and flat end mill, respectively. Tool wear for the ball, round, and flat end mill increased as the speed and feed rate increased. The flat end mill exhibited the highest rate of wear from a minimum of 0.62% to a maximum of 2.88%.