• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.66-74
• /
• 2008

Effect of disperse dyeing on flame retardant finishing of PET fabrics via UV curing using three UV curable phosphorous-containing methacrylates and ammonium polyphosphate(APP) was investigated. The dye fixation and flame retardancy of PET fabrics did not change significantly with excellent durability to five laundering cycles irrespective of the dyeing and finishing sequence. However, the flame retardancy of Pekoflam-treated fabrics was lower than that of the UV treated and decreased substantially when heat treatment was carried out before the dyeing. The dyeability of the flame-retardant PET fabrics was not affected in the case of UV curing of the methacrylates alone. However, UV finishing after the dyeing caused significant decrease in K/S and ${\Delta}E$ due to changed refraction and inherent color of surface coating of the UV curable monomers and APP. Whereas the heat treatment with Pekoflam decreased both color fastness to laundering and sublimation, surprisingly the UV finish of PET fabrics before and after the dyeing increased the color fastness probably resulting from the presence of photopolymerized surface layer on the fabrics.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2014

For durability design to protect against chloride-induced corrosion, it is important to estimate the amount of chlorides on the surface. However, it is difficult to estimate the airborne chlorides, a boundary condition, due to the difference between the amount of chlorides attached to a surface of an actual structure and that in the air. Therefore, in this study the attachment rate analysis of airborne chlorides was evaluated for 13 types of finish materials. As a result, despite differences in the amount of airborne chlorides according to the finishing type, it was found that 60 percent of airborne chlorides were attached to mortar, 30 percent were attached to steel, and 25 percent were attached to tiles compared with the amount of chlorides in the air.

• 한국의상디자인학회지
• /
• 제2권2호
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• 한국건축시공학회지
• /
• 제5권1호
• /
• pp.69-74
• /
• 2005

The construction of house in Korea firstly has been made up quantitative supply and margin of confined land until the latest. But, residents interest of living environment, demand of high-quality has varied with the latest elevation of life quality Specially, the interest for environment-friendly architecture is increased by the recent well-being trend in 2002, So, construction company and construction materials manufacturing industry are trying to offer more healthy and agreeable indoor aerial environment. Related circles do their best to commercialize and develop environment-friendly finish materials which influence indoor aerial environment. Therefore, in this study, that developing raw material and productive system that can minimize hazardous article quality discharge with formaldehyde in development of correction of deformities board such as plywood that is used mainly by a environment-friendly materials indoor finish, and examines application possibility of construction correction of deformities board through properties of matter examination by purpose, do.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.1-9
• /
• 2007

OSP(Organic Solderability Preservatives)표면처리는 저비용, 고신뢰성, 친환경 특성으로 기존의 금속계 표면처리인 Ni/Au 표면처리를 대체할 수 있는 공정으로 관심 받고 있다. 그러나, OSP는 저분자로 구성된 유기물이므로 여러 온도공정으로 구성된 전자패키지공정에서 제품의 변색이 필연적으로 발생하여 전체 양산수율에 미치는 영향은 매우 크다. 본 연구에서 OSP 처리된 제품을 전자패키지 공정별로 발생하는 변색수준에 따라서 시편을 분류 및 채취하여 변색원인분석 및 솔더조인트 특성평가를 수행하였으며, 기존의 표면처리공정인 Ni/Au 처리된 제품과 통계 적으로 비교 분석하였다. 따라서 변색원인에 대한 분석을 통하여 OSP 처리된 전자패키지 제품에 적용 시 발생하는 공정문제점에 대한 해결책을 제시하였다.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.57-64
• /
• 2012

표면처리에 따른 Sn-1.2Ag-0.7Cu-0.4In 솔더범프의 접합 강도 평가를 위하여 전단 속도 및 열처리 시간에 따른 볼 전단강도 시험을 실시하였다. 전반적으로, 전단속도가 증가함에 따라 전단강도는 증가하였지만 인성은 감소하는 경향을 나타내었다. 파괴모드 관찰 결과, 전단 속도가 증가함에 따라 파괴모드의 경우, ENIG(electroless nickel immersion gold) 처리는 취성파괴가 대부분 지배적으로 존재하였고, OSP(organic solderability preservative) 처리는 pad open이 주로 발생하였다. 또한, 500 mm/s의 고속전단시험에서는 열처리 시간이 증가함에 따라 표면처리별 전단강도와 인성 값 모두 감소하는 경향을 보였다. ENIG 표면처리가 OSP 표면처리 보다 좋은 접합강도 특성을 보이는 것은 솔더범프 계면의 금속간화합물의 물성 및 두께와 밀접한 연관이 있는 것으로 판단된다.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.52-59
• /
• 1996

Conventionally, grinding of stainless steel, aluminium ally, copper alloy, and titanum alloy are difficult to obtain the high quality finish, because they have the mechanical properties such as low hardness, high toughness which result in the loading of wheel and the poor surface finish. Inorder to perform the grinding operations for these sorts of materials easily, the discontinuous grinding wheel with multi-porous grooves has newly been developed. The multi-porous grooves were formed during wheel production. This discontinous grinding wheel increases the grinding performance. It is desirable to use the discontinuous grinding wheel when grinding materials wiht high efficiency and accuracy which is impossible by conventional wheels. In this paper, the constructing and manufacturing method of grinding wheel with multi-proous grooves are explained, and the grinding charateristics of discontinuous grinding wheel are also illustrate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.29-30
• /
• 2018

The development of the industry has increased the indoor living time of modern people. Therefore, indoor pollution is attracting attention as a social issue. One of the indoor air pollution is formaldehyde. Formaldehyde has been classified as a first-level carcinogen by international cancer research organizations. Formaldehyde has been used to protect products such as construction materials and finish materials, and being diffused in the interior construction process. In this study, we used phytoncide with cement matrix to reduce formaldehyde, an indoor environmental contaminant. The strengths was increased slightly and formaldehyde showed a reduction effect over time.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2001년도 추계학술대회 논문집
• /
• pp.3-9
• /
• 2001

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.708-713
• /
• 2008

Various kinds of contaminant are generated from many kinds of interior construction materials, furniture and life articles. People of today living indoor most of the time are exposed to these kinds of contaminant. In this connection, people are exerting their efforts to reduce the occurrence of contaminant from the interior finish materials. And it is the actual condition that research is being actively made on the method of reducing contaminant by performing bake-out for newly constructed housings. Bake-out is the method of temporarily increasing the generation of the harmful contaminant quantity including VOCs and Formaldehyde emitting from construction materials or finish materials by increasing the interior temperature of the newly constructed buildings or improved or repaired buildings, and then removing it by mobilizing ventilation system. In this study, the researcher measured the effect of reduced concentration according to ventilation or non-ventilation of the newly constructed but not yet resident public housings during the bake-out in order to grasp the effect of reduced interior air contaminant according to the elapse of timeat the time of bake-out.