• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.126-139
• /
• 1994

본 연구에서는 BETHSY 실험장치에서 수행한 6" 소형 냉각재 상실사고(LOCA) 실험을 최적 열수력 코드인 CATHARE2 V1.2와 RELAP5/MOD3를 이용하여 계산했다. 본 연구의 주 목적은 소형 LOCA시 관심을 가지는 주요 물리현상인 이상 임계유동, 감압과정, 노심수위 감소, loop seal clearing 등에 대한 두 코드의 소형 LOCA 계산모의능력을 평가하는 것이다. 두코드는 이상 유동현상의 전개 경향이나 발생시점을 비교적 잘 예측하는 것으로 나타났고, CATHARE2의 경우가 실험과 더 잘 일치했다. 그렇지만 두 코드는 loop seal clearing 현상, loop seal clearing 발생후의 노심수위, accumulator 유량거동 등의 예측에는 약간의 편차를 보였는데, 편차의 정도는 RELAP5가 CATHARE2보다 더 큰 것으로 나타났다. 두 코드의 편차요인을 보다 상세히 분석하기 위하여 계면 마찰력, mesh크기, 파단노즐 junction에서의 방출계수(Discharge coefficient)등에 대하여 민감도분석을 수행하였다. 그 결과 CATHARE2의 경우는 계면 마찰력을 증가시킴으로써 감압과정시 일차계통의 질량분포, 즉 증기 발생기 입구 공동(SG inlet plenum)에서의 차압과 Cross√er leg의 차압이 개선되었으며, 증기발생기 외측 열전달계수를 증가시킴으로써 중기발생기의 압력변화를 개선할 수 있었다. RELAP5의 경우는 어떤 하나의 입력변수를 변화시켜서 과도기의 결과를 개선할 수 없었으며 다만, 계면 마찰력 모델링에 여전히 많은 불화실성이 내포되어 있음을 확인했다.확인했다.

• 한국패류학회지
• /
• 제30권1호
• /
• pp.95-99
• /
• 2014

In the present study, we surveyed the molluscan fauna in a lagoon located near Seong-san harbor on the east coast of Jeju Island in July 2012. For the survey, a $25{\times}25cm$ quadrat was deployed over 3 randomly selected sites in the intertidal area of the lagoon. Sediment from the surface to a depth of 25 cm in the quadrat was removed and sieved using a 1 mm mesh sieve. All molluscan fauna retained on the sieve was identified to the species level. From the survey, 25 species of mollusca belonging to 2 orders and 16 families were identified. Species richness, in terms of total number of species, was found to be the highest at sampling site 1, where the substrate was composed of coarse sand and some rocks, while it was lowest at sampling site 3, composed of compact fine sand. Regardless of the type of substrate at the sampling sites, the mud-creeping snail Batillaria cumingii (Crosse, 1862) occurred at a high density, ranging from $324-468ind./m^2$. The luciniid bivalve Pillucina pisidium also occurred at a high density at sampling site 1, at $336ind./m^2$, while the density of this species was only $4ind./m^2$ at sampling site 3. The Manila clam Ruditapes philippinarum could be found at all 3 sampling sites with very low density ranging from $16-48ind./m^2$. The density and species richness of molluscs observed in this study was lower compared to the previously reported molluscan fauna in Jeju Island, suggesting that further investigation needs to be carried out to conserve the unique marine lagoon ecosystem in Jeju Island.

• 생태와환경
• /
• 제49권3호
• /
• pp.187-196
• /
• 2016

본 연구는 감조하천과 연결된 하수처리장 방류구에서 발생하는 거품의 형성기작 해석과 저감기술의 실험적용을 위하여 2015년 3월부터 2016년 7월까지 수행하였다. 거품은 방류구와 하천 수면 사이의 낙차에 의한 공기연행과 거품확산방지막에 의한 내부축적이 원인이었다. 특히 썰물 때와 방류량이 많을 때에 거품성장이 가장 활발하였다. 이를 해결하기 위하여 방류수로와 방류구에 각각 미세스크린 망과 수중방류 인공수로장치를 각각 설치한 후 실험하였다. 거품 저감효과는 각각 약 85.0~92.0%, 70.7~85.6% 범위였다. 또한, 거품뿐만 아니라 소음 등 부가적인 문제점도 해결할 수 있었고, 무엇보다도 민원예방에 기여할 것으로 본다. 본 연구는 단일 하수처리장을 대상으로 하였으나, 국내 다른 하수처리장의 유사한 사례에도 응용될 수 있을 것으로 사료된다.

• 한국도로학회논문집
• /
• 제11권1호
• /
• pp.165-175
• /
• 2009

역학적 경험적 포장 설계법을 도입하려는 현재의 연구추세에 발 맞추어 정확한 응력, 변형률, 변형을 기초로 포장구조체를 해석하기 위한 역학적 접근방법이 필요한 시점이다. 기존의 실험결과에 따르면 연성포장 구조의 기층에 이용되는 자갈과 노상층에 이용되는 노상토등의 포장 하부재료는 반복하중 조건하에서 비선형 회복탄성계수의 특징을 따르는 것으로 나타났다. 이 비선형 거동은 재료의 현재 응력에 의한 회복탄성계수 모델로 나타나질 수 있으며 정확한 해를 구할 수 있는 역학적 방법중의 하나인 유한요소 해석 방법에 적용되어 질 수 있다. 이 연구에서는 비선형 해석기법과 효과적인 해 수렴기법이 구현된 재료 모델 부 프로그램을 범용 유한요소 프로그램의 하나인 아바쿠스에 적용시켰다. 이 수치해석 방법에는 더 정확한 해를 찾기 위한 체눈분할에 의해 만들어진 유한요소 모델이 이용되었다. 이런 일련의 방법들에 의한 포장구조체의 해석결과, 2차원과 3차원 비선형 유한요소 해석의 결과가 큰 차이를 보이는 것으로 나타났다. 또한, 사용된 부 프로그램은 미연방 항공국 공항 시험포장에서 측정되어진 결과 값에 의해 비교 검증되었다.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.382-393
• /
• 2010

Thermal mixing by steam jets in a pool is dominantly influenced by a turbulent water jet generated by the condensing steam jets, and the proper prediction of this turbulent jet behavior is critical for the pool mixing analysis. A turbulent jet flow induced by a steam jet discharged through a vertical upward single hole into a subcooled water pool was subjected to computational fluid dynamics (CFD) analysis. Based on the small-scale test data derived under a horizontal steam discharging condition, this analysis was performed to validate a CFD method of analysis previously developed for condensing jet-induced pool mixing phenomena. In previous validation work, the CFD results and the test data for a limited range of radial and axial directions were compared in terms of profiles of the turbulent jet velocity and temperature. Furthermore, the behavior of the turbulent jet induced by the steam jet through a horizontal single hole in a subcooled water pool failed to show the exact axisymmetric flow pattern with regards to an overall pool mixing, whereas the CFD analysis was done with an axisymmetric grid model. Therefore, another new small-scale test was conducted under a vertical upward steam discharging condition. The purpose of this test was to generate the velocity and temperature profiles of the turbulent jet by expanding the measurement ranges from the jet center to a location at about 5% of $U_m$ and 10 cm to 30 cm from the exit of the discharge nozzle. The results of the new CFD analysis show that the recommended CFD model of the high turbulent intensity of 40% for the turbulent jet and the fine mesh grid model can accurately predict the test results within an error rate of about 10%. In this work, the turbulent jet model, which is used to simply predict the temperature and velocity profiles along the axial and radial directions by means of the empirical correlations and Tollmien's theory was improved on the basis of the new test data. The results validate the CFD model of analysis. Furthermore, the turbulent jet model developed in this study can be used to analyze pool thermal mixing when an ellipsoidal steam jet is discharged under a high steam mass flux in a subcooled water pool.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.316-333
• /
• 2021

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain's age, the captain's career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were 'hauling net operation,' 'readjustment and storage of fishing gear,' and 'fish handling' and the hardest factor in fishing management were in the order of 'reduction of catch,' 'labor shortage' and 'rising labor costs.' The most institutional improvement that is most needed in coastal improved stow net fishery was an 'using fine mesh nets.' Most of the respondent to the questions on the experience in hiring foreign crews was 'either hiring or willing to hire foreign crews,' and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was 'high labor costs.' The degree of communication with foreign crews during fishing operation were 'moderate' or 'difficult to direct work.' The most important problem in hiring foreign crews (the first priority) was an 'illegal departure.' As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a 'fish warehouse.' The most preferred equipment for the construction of new fishing vessel were 'engine operation monitoring' and 'navigation safety devices.' The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.