• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.1 no.1
• /
• pp.32-45
• /
• 1996

Analyses of surface sediment textures and recent benthic foraminifera were carried out to understand the change of sedimentary depositional processes in the eastern part of Kwangyang Bay. Echo-sounding images revealed that topographic change of the delta front sheet sand was caused by POSCO (Pohang Steel Company)'s dredging and reclaiming. The sand body prograded toward southeast. Fine sediments are distributed in the northeastern part of the study area. Identification of benthic foraminifera was conducted for the two selected cores from the sand body for the first time. Dominant species are Ammonia beccarii, Elphidium excavatum and Quinqueloculina lamarckiana. No abrupt change of benthic foraminiferal assemblage was observed from the sedimentary sequences.

• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.112-119
• /
• 1997

Coastal sediments collected near the Youngkwang Nuclear Power Plant were analysed for major(Al$_2$O$^_3$, Fe$^_2$O$^_3$, MgO, CaO, Na$^_2$O, K$^_2$O, TiO$^_2$, MnO), trace (Ba, Sr, V, Co, Cr, Cu, Ni, Zn, Pb) metal, and P$^_2$O$^_5$ contents. The composition of bulk metals from most stations fits within the range as those in the average crustal and sedimentary rocks, suggesting that the anthropogenic perturbation of these components is insignificant. The abundance and distribution of total contents for the majority of metals in the surface sediment could be explained by the grain size and were associated with mud (<63 ${\mu}$m) contents. However, distributions of Ca, K, Sr and Ba did not have any significant association with the sediment grain size. This may be due to the geochemical coherence among these metals in certain minerals abundant in coarse grained fractions. The distribution of Pb appears to be partly affected by the contribution from aerosol fallout. Using the R'-mode factor analysis, we show that the variance of the metal contents could be explained by four factors which account for 93.7% of the total variance. It appears that texturally controlled and/or sorting factors influenced by fine fraction are the most dominant factors which determine the relative abundance and distribution of metals in the study area.

• Journal of Korean Society on Water Environment
• /
• v.31 no.4
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.217-224
• /
• 2002

One of the dominant aspects governing the accuracy of the FDTD method is the size of the spatial increment used in the model. The effect of having reduced cell size is to increase the computational time and memory requirements. To overcome these problems, sub-gridding technique can be used. This implies that the application of a sub-grid cell would provide improved accuracy without increasing the run time and computer resources considerably. In this paper, we describe the three dimensional sub-gridding technique that is applied to model only the fine structure region of interest. The detailed solution procedure is described and some test geometries were solved by both uniform grid and sub-grid models to validate the suggested approach. While keeping the accuracy, the computational time becomes 6 times faster and the memory requirement is reduced by a factor of 2.5 comparing to the conventional FDTD approach.

• Particle and aerosol research
• /
• v.13 no.2
• /
• pp.43-52
• /
• 2017

Policy direction for the management of air quality in Korea has been on the reduction of the average concentrations of the criteria air pollutants such as sulfur dioxide and fine particles. However, recently, risk based management of air pollutants becomes an important issue. In this study, to develop an effective air quality management policy direction in Korea, (1) the fourth Multiple Air Toxics Exposure Study (MATES IV) carried out in the South Coast Air Quality Management District (SQAQMD) in the USA is reviewed and (2) the results are compared with in these in Seoul and (3) policy directions are suggested. It was found that (1) systematic integrated study comprising of measurement, modeling, emission inventory estimation, and risk assessment was essential to estimate the health risk of air pollutants reliably, (2) cancer risk of diesel particle was dominant over other air pollutants, and (3) health risk based emissions were different from amount based emissions. It was suggested that (1) reducing the exposure from hot spots might important to reduce health risk from air pollutants and (2) an integrated air quality management administration system is important for the efficient management of air pollution.

• Journal of the Korean earth science society
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2004

The clay minerals of thirty-four bottom sediments collected from the northwestern continental shelf of the East China Sea have been determined by X-ray diffraction analysis. The clay mineral distribution is mainly controlled by the sediment source and the dominant circulation pattern. The predominant clay mineral in our study area is illite comprising more-than 70% of whole clay fraction. The highest concentration of illite (>72%) is found in the southeastern offshore parts beyond the reach of terrigenous input from the Cheju Island. It means that these illites are largely transported by the Kuroshio Current from the South China Sea. Smectite is highly concentrated in the northwest middle part and in the outer-shelf mud patch. It seems to be due to the high supply of smectite transported from China where the fine-grained sediments are discharged from the modern and ancient Huanghe River. The relatively high abundance of kaolinite is likely derived from the Changjiang River via Taiwan ·Warm Current. In contrast, the large amounts of chlorite and high chlorite/kaolinite ratios occur in the northwestern are, reflecting the transportation by the Huanghai Sea Coastal Current from the southern Yellow Sea.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.4
• /
• pp.185-189
• /
• 2007

A scanning electron microscope (SEM) is a complex system, consisting of many sophisticated components. For a systematic characterization, a $2^4$ full factorial experiment was conducted. The SEM components examined include condenser lens 1 and 2 (denoted as A and B, respectively), and Objective lens (coarse and fine-denoted as C and D respectively). A statistical analysis was conduced to investigate factor effects and variations In response surfaces. Among four factors, main effect analysis revealed that A and D were Identified as the dominant factor. Moreover, B showed conflicting effect against C. The $R^2$ of statistical regression model constructed was about 69.6%. The model generated 3D response surface plots facilitated understanding of complex tactor effects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.64-69
• /
• 2020

To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.

• Transactions of Materials Processing
• /
• v.30 no.4
• /
• pp.195-200
• /
• 2021

In this study, we investigated the dominant processing variables that would influence the microstructural development of AA6061 deformed by differential speed rolling (DSR) at ambient temperature. For this purpose, we carried out a series of DSR on the samples to investigate the effects of roll speed ratio, sample rotation, and number of operation under specific rotation. Among these, the condition with a height reduction of 75% at a speed ratio of 1:4 through rotation along rolling direction (RR) displayed the pronounced results of more homogenous matrix-structure and superior mechanical properties than the others tested in this study. This was mainly due to the cross shearing of macro-shear pattern in segment where dynamic recrystallization took place with ease throughout the sample. Thus, an average microhardness value of 101 Hv was obtained in the present sample deformed by 4-pass DSR with RR where macro cross-shearing was effectively applied.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1849-1858
• /
• 2021

We analyzed the monthly and annual trends of the meteorological factors(wind speeds and directions and air temperatures) measured at an automated synoptic observation system (ASOS) and fine particle (PM₁₀ and PM_2.5) concentrations measured at the air quality monitoring systems(AQMSs) in Suwon. In addition, we investigated how the fine particle concentrations were related to the meteorological factors as well as urban morphological parameters (fractions of building volume and road area). We calculated the total volume of buildings and the total area of the roads in the area of 2 km × 2 km centered at each AQMS using the geographic information system and environmental geographic information system. The analysis of the meteorological factors showed that the dominant wind directions at the ASOS were westerly and northwesterly and that the average wind speed was strong in Spring. The measured fine particle concentrations were low in Summer and early Autumn (July to September) and high in Spring and Winter. In 2020, the annual mean fine particle concentration was lowest at most AQMSs. The fine particle concentrations were negatively and weakly correlated with the measured wind speeds and air temperatures (the correlation between PM_2.5 concentrations and air temperatures was relatively strong). In Suwon city, at least for 6 AQMSs except for the RAQMS 131116 and AQMS 131118, the PM₁₀ concentrations were affected mainly by the transport from outside rather than primary emission from mobile sources or wind speed decrease caused by buildings and, in the case of PM_2.5, vise versa.