• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.221-224
• /
• 2001

In this paper, the properties of concrete using recycled fine aggregate are anlyzed. Five different contents. 0%, 40%, 60%, 80% and 100% of recycled concrete were used for this study. At curing 280days, compressive strength, dry-shrinkage, static modulus of elasticity and poission's ratio have been tested according to replacement ratio of recycled fine aggregates.

• Carbon letters
• /
• 제12권3호
• /
• pp.138-142
• /
• 2011

Poly(vinyl alcohol) (PVA) composites with various graphite oxide (GO) contents (0 to 10 wt%) were prepared by sonicating the mixture of PVA and GO, followed by crosslinking with glutaraldehyde. GO was pre-treated with oxyfluorination ($O_2:F_2$ = 8:2) in order to modify the surface of GO to allow it to carry hydrophilic functional groups. PVA/GO composite hydrogels were characterized by scanning electron microscopy and Fourier-transform infrared spectrometer (FT-IR). The morphology of the PVA/GO composite hydrogels and the variations in soluble gel portion were investigated under various GO contents and UV irradiation doses. The variation in the chemical structure of photo degraded PVA/GO composite hydrogels was studied by FT-IR. The photochemical stability of PVA/GO composite hydrogels under UV irradiation was found to improve noticeably with increasing content of uniformly dispersed GO.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.246-253
• /
• 2006

Experimental laboratory tests were carried out to assess the effect of fine content and salinity of soils on the measurement of TDR(Time Domain Reflectometry). In the test, using soil columm which was made by PVC pipe with the dimension of 25cm height and 20cm diameter, the salinity variation of soil was controlled by the solution which was dissolved NaCl to destilled water in the range of 0-40g.$L^-1$. The fine content of soil was controlled by kaolinite which was mixed with Jumunjin sand in the range of 0-50% to the total dry weight. The water contents of soil tested were measured with the conventional oven dry method beside TDR and compared the these values to figure out the extent of effect. As the results of tests, it was appeared that the water content measurement by TDR can be affected by the salinity level, fine contents, and the degree of saturation of the soil.

• International Journal of Contents
• /
• 제15권2호
• /
• pp.75-78
• /
• 2019

The Integration technique of combining the measurement method with the fine precision of the sensor collecting the satellite-based information to determine the displacement space is available to a variety of diagnostic information. The measurement method by a GNSS with the sensors is needed since there will always be occasional occurrence of natural disasters caused by various environmental factors and the surroundings. Such attempts carried out nationally by distributed torsional displacement of the terrain and facilities. The combination of the various positioning analysis of mm-class for the facility of main area observed is required constantly in real time information of the USN/IoT Smart sensors and should be able to utilize such information as a precisely fine positioning information for the precisely fine displacement of the semi-permanent main facilities. In this study, for the installation of the receiving system, the USN/IoT base line positioning are easily accessible for the target bridges. Transmitting hourly from the received data is also executed in real time using the wireless Wi-Fi/Bluetooth bridges and related facilities to automatically process a fine position displacement. The results obtained from this method can be analyzed by real-time monitoring for a large structure or facilities for disaster prevention.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.108-113
• /
• 2013

Industrialization and modernization of the beginning of the IT industry is growing very fast. Since telecommunications industry was developed rapidly, technologies about miniaturization and high-precision of parts have been actively developed to lead information revolution. generally, the entire shear surface of the product applying fine blanking technology must be very precise. Fine blanking is used to save cost by avoiding post-processing of the product. When using press blanking, it spends a lot of money on the production by using many post-processing. Fine blanking typically used in 0.5~18 mm thick steel plate. Because a lot of post-processing cost can be used to process, except for fine blanking. In order to develop components "CHANCE CONTENTS" in the fine blanking process, the purpose of this study is to minimize the edge of the bridge, secured 95% of the material thickness of the shear surface using the 1.6 mm thickness of the material SPCC. Blanking process by introducing after changing thickness through forging process, due to change in vee-rring force and counter force, the experimental amount of depressions and flatness and the shear surface were analyzed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.215-216
• /
• 2011

This study investigates the effect of partial replacement with cement on the properties of blast furnace slag-based mortar. Recycled fine aggregate with various contents was used to activate the hydration of blast furnace slag in the mortar and compared its effect on strength development. Results showed that increasing cement and recycled fine aggregate increased the strength of mortar specimens. However, this study found that the mortar made with partial replacement of river sand with recycled fine aggregate of 20% developed a similar strength to the strength that cement with 10% can achieved.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.88-93
• /
• 2011

천연골재의 고갈 및 환경규제에 의한 건설용 잔골재의 수급불균형 문제를 해결하기 위해 폐기콘크리트로부터 생산된 순환잔골재의 적용성을 위한 연구들이 수행되어 왔다. 본 연구의 목적은 W/C 및 단위수량의 변화에 따른 순환잔골재를 사용한 콘크리트의 역학적 특성 및 내구성능에 관한 이해를 높이는 것이다. 또한, 순환콘크리트의 구조적 적용을 위한 기초자료를 제시하는데 의미가 있다. 특히, 순환잔골재를 100% 대체한 순환콘크리트에 대하여 W/C 및 단위수량의 변화에 따른 영향은 공기량, 슬럼프, 응결시간, 압축강도, 인장강도, 탄산화 및 염화물 침투와 같은 항목에 대한 시험결과에 의해 분석 제시되었다.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.61-67
• /
• 2007

Paper sludges collected from three different paper mills were physico-chemically analyzed in order to use them as raw materials for making bed soils and seedling pots. The sludge from a fine paper mill contained lots of inorganic pigment particles used for coating, as those from a newsprint mill and a tissue mill had not. It was clearly through XRD analysis confirmed that all sludges included calcium carbonate. The paper sludge from the tissue mill contained the greatest amount of particles, which would contribute to water absorption and nutrient storage. The sludge from the fine paper mill had the highest density due to many inorganic elements. While the ash content and the total nitrogen content were the highest in the sludge from the fine paper mill, the C/N ratio was the lowest in the fine paper mill sludge. All sludges seemed to have insufficient contents of potassium. The sludges from the newsprint mill and the tissue mill showed more silicon contents than that from the fine paper mill. It was concluded that the sludge from the fine paper mill would be able to be the most efficient raw materials for making bed soils and seedling pots and the other two sludges would be more efficient for intensive culture for crops such as rice and grain with additional supplement of nitrogen and other nutrients.

• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.93-103
• /
• 2017

남극 대륙은 연구가치가 높은 다양한 생명체들과 풍부한 자원이 매장되어 있어 세계의 많은 국가들이 남극 개발에 관심을 가지고 있다. 우리나라는 2014년 제2의 남극과학기지인 장보고 과학기지를 준공한데 이어 남극 활주로 건설과 제3의 남극 과학기지 건설을 준비하며 남극 개발에 박차를 가하는 중이다. 하지만 동토의 경우 일반적인 흙과는 달리 얼음과 부동수분의 영향으로 시간에 따른 변형이 크게 나타나기 때문에 크리프 변형 특성을 파악할 필요가 있다. 그러나 크리프 변형 특성을 파악하기 위한 시험의 경우 많은 비용과 시간이 소모되기 때문에 예전부터 동토의 크리프 거동을 추정할 수 있는 모델에 대한 연구들이 많이 진행되어 왔으며, 본 연구에서는 동결 사질토의 함빙비를 고려한 장기변형 모델인 Ting의 Tertiary creep model의 모델 도출 방법에 세립분 함량을 고려할 수 있는 계수를 추가하여 다양한 흙에 적용할 수 있는 크리프 모델을 제안하고자 하였다. 이를 위해 세립분 함량이 0, 5, 10, 15%인 동결 시료로 -5, -10, -$15^{\circ}C$의 온도에서 일축 크리프 시험을 수행하였고, 시험 결과를 바탕으로 세립분 함량을 고려한 장기변형 예측 모델을 제안하였다. 그 결과, Tertiary creep model의 모델 도출 방법만을 사용하여 세립분함량을 고려한 장기변형 예측 모델을 제안하는 것은 무리가 있는 것으로 판단되어 동토의 크리프 변형을 고려하기 위한 새로운 개념의 모델이 필요할 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.194-201
• /
• 2019

본 연구는 CGS를 콘크리트용 잔골재로서 활용성을 검토하기 위하여 CGS 치환율에 따른 콘크리트의 특성을 분석하였다. 실험결과, 슬럼프 및 슬럼프 플로우는 CSa 및 MS 모두 CGS 치환율이 증가할수록 증가하였으며, 공기량은 반대로 감소하였다. 재료분리평가정수(EISN)는 CSa를 사용한 경우 CGS 25%, MS를 사용한 경우는 CGS 50~75%에서 양호한 것으로 나타났다. 압축강도는 CSa를 사용한 경우 CGS 치환율이 증가할수록 저하하였는데, CGS 25%에서 저하폭이 가장 작았다. 단, MS를 사용한 경우는 포물선 경향으로 CGS 50%에서 최대치를 나타내었다. 상호비교로서 잔골재 종류에 따른 압축강도는 MS보다 CSa가 약 8% 높게 나타났고, CGS 사용 유무에 따라서는 CGS를 사용하였을 때 낮은 강도 영역에서는 작게 나타났지만, 높은 강도 영역에서 크게 나타났다. CGS 치환율에 따른 콘크리트의 품질을 종합적으로 검토한 결과, CGS를 잔골재에 25~50% 전후로 혼합하여 사용한다면 유동성 및 강도 증진에 긍정적으로 기여할 수 있을 것으로 판단되었다.