• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.159-162
• /
• 2003

The remeshing algorithm using the constrained Delaunay method adapted to the mesh density map is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally fine mesh at the region where the error is concentrated such as die corner. In this paper, the point insertion algorithm is used and mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. And an optimized smoothing technique is adapted to have smooth distribution and improve the quality of the mesh.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.249-252
• /
• 2006

Recently, the interest for renewable energy producing system is increasing rapidly. Among these, the wind turbine is most highlighted. It is installed at severe environment and generate electricity for a long time to exceed in 20. Components of wind turbine are required high reliability. Therefore, structural strength analysis for wind turbine is needed an accurate FE model. This paper is to provide reliable fine element modeling method of yaw bearing for wind turbine.

• 소성∙가공
• /
• 제12권4호
• /
• pp.382-387
• /
• 2003

In this study, to achieve the optimal conditions for mechanical hyper-fine pattern fabrication process, deformation behaviors of the materials during indentation were studied with numerical method by ABAQUS S/W. Brittle materials (Si, Pyrex glass 7740) were used as specimens, and forming conditions to reduce the elastic recovery and pile-up were proposed. The indenter was modeled a rigid surface. Minimum mesh sizes of specimens are 1-10nm. Comparisons between the experimental data and numerical result demonstrated that the finite element approach is capable of reproducing the loading-unloading behavior of a nanoindentation test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.393-396
• /
• 2005

This paper is concerned with the drawing process of $Al-1\%Si$ bonding wire. In this study, the finite-element model established in previous work was used to analyze the effect of various forming parameters, which included the reduction in area, the semi-die angle, the aspect ratio, the inter-particle spacing and orientation angle of the fine Si particle in drawing processes. The finite-element results gave the consolidation condition. From the results of analysis, the effects of each forming parameter were determined. It is possible to obtain the Important basic data which can be guaranteed in the fracture prevention of $Al-1\%Si$ wire by using FE-Simulation.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.33-41
• /
• 2018

지반의 내부침식은 유체 흐름에 의하여 입자골격에 부착된 세립토가 이탈하는 현상이며, 지속적인 세립토의 유동은 지반구조물의 수리-역학적 특성을 약화시킨다. 본 논문은 세립토의 유동에 관한 지배방정식을 정립하고 수치해석 기법을 제안하였다. 공극내의 세립토는 액상의 세립토($c_e$), 조립토에 부착된 입자(${\sigma}_a$) 그리고 조립토골격에 폐색된 세립토(${\sigma}_s$)로 구분하여 상관계를 제시하였다. 이를 바탕으로 세립토의 유동과 공극수의 흐름에 대한 수리학적 지배방정식들과 유한요소 수식화를 제시하였다. 세립토의 이탈, 부착 그리고 공극막힘에 대한 구성 모델들을 제시하였으며, 실내 1차원 침식실험으로부터 모델변수를 도출하는 방법을 제안하였다. 그리고 세립토의 공극 막힘 현상에 의한 지반의 투수계수 변화에 대한 추정식을 제안하였다. 기존의 침식실험 결과에 대한 수치해석을 통하여 개발된 해석기법과 세립토 유동 모델의 적정성을 검증하였다.

• Ocean Systems Engineering
• /
• 제5권2호
• /
• pp.77-89
• /
• 2015

As the exploitation of oil and gas resources advances into deeper waters and harsher environments, the design and analysis of the flexible risers has become the research focus in the offshore engineering filed. Due to the complexity of the components and the sliding between the adjacent layers, the bending response of the flexible risers is highly non-linear. This paper presents the finite element analysis of the flexible risers under bending loads. The detailed finite element model of the flexible riser is established in ABAQUS software. This finite element model incorporates all the fine details of the riser to accurately predict its nonlinear structural behavior. Based on the finite element model, the bending moment-curvature relationships of a flexible riser under various axisymmetric loads have been investigated. The results have been compared with the analytical ones obtained from the literature and good agreements have been found. Moreover, the stress of the tendon armors has been studied. The non-linear relationship between the armor tendons' stress and the bending loads has been obtained.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.496-503
• /
• 2008

With the improvement of computer power and technology, fracture modelling by finite element methods has become a topic of extensive studies. However, fracture simulation much limited to an academic study of crack propagation with a fine mesh. Element deletion method is a useful tool for estimating damage due to accidental or extreme loads on structures, provided that an effective and realistic criterion is established for simulating the material failure and subsequent element deletion. In this study, ABAQUS/Explicit is used to simulate the material failure on the basis of experimental results by X. Huang et al. Through numerical experiments, we suggest a formulation to determine the failure strain associated with the size and thickness of removed elements.

• 한국정보통신학회논문지
• /
• 제22권5호
• /
• pp.722-727
• /
• 2018

현재까지 미세먼지에 대한 연구는 예측, 분석, 측정 등으로 나눠지는데, 주로 대기환경 분야에서 이루어져 왔다. 미세먼지는 대기질 인자와 기상인자 그리고 배출 등 여러가지 원인으로 인해 발생한다. 각 요소들이 미세먼지에 얼마나 많은 영향을 끼치는지 상관관계를 분석하는 것이 우선이라고 판단하였고, 이를 실험하였다. 이 상관 분석에는 기상청과 에어코리아를 통해 확보한 대기질 인자와 기상인자 데이터를 이용, IBM사의 SPSS라는 Tool을 사용하여 이루어졌다. 그 결과 각 대기질 인자와 기상인자들이 미세먼지 수치에 미치는 영향정도와 상관관계를 좀 더 명확하게 알 수 있었다. 본 논문에서는 미세먼지 수치와 영향요소 및 상관관계의 정확한 분석을 위해 상관분석 및 피어슨 상관계수로 결과를 나타낸다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.877-881
• /
• 2002

Much research efforts have been made on the equal channel angular pressing(ECAP) which produces ultra-fine grains. In this paper the ECAP processes with Zr-702 alloy at elevated temperature and at room temperature are considered. Both two-dimensional and three-dimensional finite element analyses have been employed to investigate the deformation behaviors of specimen during ECAP process.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.83-91
• /
• 2008

The development of the equal channel angular pressing(ECAP) process in metals has recently provided a feasible solution to produce ultra-fine or nano-grained bulk materials with tailored material properties. However, ECAP process is difficult to scale up commercially due to requirements of an excessive load. In this paper, a new Hybrid-ECAP process with torsional die is considered to obtain materials of ultra-fine grain structure under low forming load. An upper bound analysis and numerical simulation (DEFORM 3D, a commercial FEM code) are carried out on the torsional die. By the upper bound analysis, analytical expression for the compression force and rotation speed are obtained. By the FEM analysis, the distribution of strain, stress and deformation are obtained. These results show that the Hybrid-ECAP is a useful process because this process can obtain the homogeneous deformations with relatively low forming load. Additionally, due to decreased forming load, die life can be improve.