• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.1-8
• /
• 2014

PURPOSES : The objective of this study is to evaluate the bond strength of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals using the bitumen bond strength (BBS) test. METHODS : For the laboratory testing, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the asphalt emulsion and aggregate substrate based on the AASHTO TP-91. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions and one of unmodified emulsion, the CSS-1H, are employed. For chip seal study, the BBS tests are performed at 30, 60, 120, and 240 minutes of curing times with curing and testing temperatures of $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$. The fog seal tests are conducted at 30, 60, 90, 120, 180 minutes, and 24 hours with curing and testing temperatures of $25^{\circ}C$, $30^{\circ}C$, and $35^{\circ}C$. RESULTS AND CONCLUSIONS : Overall, chip seal emulsions and fog seal emulsions show the similar bond strength trend. At the same testing condition, polymer-modified emulsions show better bond strength than unmodified emulsions. Also, there is no significant difference between polymer-modified emulsions. One of important findings is that the most bond strength reaches their final bond strength within one hour of curing time. Therefore, the early curing time plays a vital role in the performance of chip seals and fog seals.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.82-90
• /
• 2009

It is very important to utilize effectively fibrous waste paper in terms of cost savings, environmental effects, and governmental policies. The quality of final products and runnability of papermaking process are primarily affected by constitutions of fibrous raw materials. In specific, board grade paper depends directly on compositions of waste paper bales. At present, the raw materials of board grade paper are mainly derived from lots kinds of wastepaper. Some papermaking countries, like EU, USA and Japan have advanced classification and management systems of recycled fiber, but Korea has not yet organized systematically. In this study, evaluation of wastepaper bale compositions and their fiber properties were carried out for effective utilization of fibrous raw materials for board grade paper production. 3 kinds of wastepaper bales were classified to fibrous or non-fibrous materials. In case of fibrous materials, KOCC, kraft sack paper and white duplex board matters were main component in total weight basis, and in case of non-fibrous materials, vinyl, plastic and cloth matters were main component, in turns. 3 representative kinds of waste paper were disintegrated and classified, and then prepared to handsheet for evaluation of recycled fiber property. Consequently, fines and ash content of waste paper, isolated from KOCC and white duplex board were higher than that of kraft sack paper. pH values of all kinds of waste fibers were neutral or weak alkaline.

• The Journal of the Korea Contents Association
• /
• v.2 no.2
• /
• pp.53-63
• /
• 2002

As the microelectronics technology is developed, new types d smart intelligent produce are being emerged. OSD user interface is one of the critical factor in this kind of product, especially brown goods and information devices, as it is responsible for input and output function. OSD is being treated as accompaniment to hardware in spite of its importance, and therefore is developed from only simple and separate usability testing based on performance measurement. This study propose a usability evaluation method of OSD based on subjective preference to support existing usability testing. The purpose of this analysis is to make dear what is important factor and how its preference level is from the user's viewpoint. The various attributes of OSD are clarified from user's questionaire and interview, and orthogonal array is generated with specifed factor levels. The prototypes are generated from rapid prototyping tool and tested in natural simulation environment. The preference data which collected in this usability testing is analyzed with conjoint analysis module. This usability evaluation is not the final stage in user interface design process but the early famed and circulated stage.

• KIEAE Journal
• /
• v.9 no.3
• /
• pp.21-27
• /
• 2009

The goal of this paper is to determine the suitability evaluation indices of a riverside reservoir space planning by classifying major indicators and calculating AHP(Analytical Hierarchy Process) based weights of them. The major indicators were set up based on literature review and questionnaire survey to experts. Four indicator categories were developed: location, environment, resource availability and economical efficiency. And they were divided into 12 sub-categories for calculating AHP-based weights. First, as for the major indicator categories, the calculation shows that the weighted index of environment is the most important at 0.458, followed by location at 0.128, economical efficiency at 0.170 and resource availability at 0.154. This suggests that environment is getting more public attention and the reservoir is regarded as a facility that is connected to a river. Those weight values were considered in calculating final weights for each of 12 sub-categories. Among them water quality and ecological environment take top ranks at 0.190 and 0.186, respectively. The lower ranks include access 0.112, resource availability of site 0.082, tourism resource 0.078, users 0.076, available land 0.052, area of site 0.031, shape of site and deterioration level 0.030 and percentage of private land 0.030 - which represents general considerations in other space planning. The difference of the top rank (water quality, 0.190) and the last one (percentage of private land, 0.027) is 0.163. The above result shows that users regard environmental aspect and resource availability more important than easiness of construction.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.109-145
• /
• 2002

Council Directive 76/768/EEC forms the basis of the actual legislation of cosmetics in the European Union (EU). After a short introduction on the background and philosophy of this legislation, the key points will be discussed. In particular, attention will be given to the basic principles for safety and in this context the effects of the implementation of the 6th Amendment (Council Directive 93/35/EC) will be analysed. The major points for discussion will be: the safety requirements for cosmetics and the final responsibility for bringing these products on the EU market; the EU concept of safety of the finished product based on the safety of the individual ingredients; the existence of positive and negative lists of ingredients and the requirement for a European dossier for all finished products. Special attention will be given to the use of validated alternative methods and the consequences of the new proposal of a 7th Amendment. Finally, the safety evaluation as it is done by the SCCNFP (Scientific Committee on Cosmetics and Non-Food Products) in the case of an ingredient present on the positive lists and the evaluation done by a safety assessor in the case of a technical information file for a finished product, both will be discussed in detail.

• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.355-366
• /
• 1994

The USNRC issued a revised ECCS rule that allows the use of best estimate computer codes for safety analysis. The rule also requires an estimation of uncertainty in calculated system response when applying the best estimate computer codes. A practical realistic evaluation methodology to evaluate the ECCS performance that satisfies the requirements of the ECCS rule has been developed and this paper describes the application of new realistic evaluation methodology to large break LOCA for, the demonstration of the new methodology. The computer code RELAP5/MOD3/KAERI, which was improved from RELAP5/MOD3.1, was used as the best estimate code in the application. The uncertainty of the code was evaluated by assessing several separate and integral effect tests, and for the application to actual plant Kori 3 & 4 was selected as the reference plant. Response surfaces for blowdown and reflood PCTs were generated from the results of the sensitivity analyses and probability distribution functions were established by random sampling or Monte-Carlo method for each response surface. Final uncertainties were quantified at 95% probability level and safety margins for large break LOCA were discussed.

• Journal of Korean Academy of Nursing
• /
• v.42 no.5
• /
• pp.632-643
• /
• 2012

Purpose: This study was done to develop tool to evaluate the core competencies regarding nursing cancer patients on chemotherapy, and to verify the reliability and efficacy of the developed tool. Methods: A tool to evaluate the core competencies was developed from a preliminary tool consisting of 112 items verified by expert groups. The adequacy of the preliminary tool was analyzed and refined to the final evaluation tool containing 76 items in 8 core competencies and 18 specific competencies. The evaluation tool is in the form of a self-report, and each item is evaluated according to a 3-point scale. From September 22 to October 14, 2011, 349 survey responses were analyzed using SPSS 20.0 and the WINSTEPS program that employs the Rasch model. Results: Results indicated that there were no inappropriate items and the items had low levels of difficulty in comparison with the knowledge levels of the study participants. The results of factor analysis yielded 18 factors, and the reliability of the tools was very high with Cronbach's ${\alpha}$=.97. Conclusion: The results of this study can be used for training and evaluation of core competencies for nursing cancer patients, and for standardizing nursing practices associated with chemotherapy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.3
• /
• pp.223-230
• /
• 2014

Purpose: The purpose of this study was to evaluate the improvement and posttreatment stability of patients treated with extraction of lower incisors. Materials and Methods: The total of 20 patients with extracted lower incisors were analyzed by means of diagnostic models and panoramic x-rays at the time of initial, final and after 2 years of retention period of the treatment. Irregularity index, overjet, overbite, tooth size-arch length discrepancy (TSALD), intercanine width, intermolar width and American Board of Orthodontics cast/radiographic evaluation (ABO-CRE) were analyzed. Statistical analysis was performed using Wilcoxon signed-rank test. Results: After treatment, irregularity index showed significant decrease (P = 0.000). TSALD showed significant increase (P = 0.028). During retention period, irregularity index showed significant increase (P = 0.001). For ABO-CRE, total score showed significant decrease after treatment (P = 0.000) and showed average decreased which was not significant result (P = 0.053). Conclusion: Through evaluation of stability of extraction of lower incisors by means of diagnostic models and panoramic x-rays, it can be concluded that lower incisor extraction treatment had been stable for 2 years after treatment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.54-61
• /
• 2017

Strengthening the protection and management of very old trees is an important aspect of urban site preservation, urban design and construction. Rating various danger factors to evaluate the degree of danger posed can help to create the correct protective countermeasures. In order to develop the danger evaluation index, this study performed four round surveys by using the Delphi method and collected opinions from experts in related fields. Necessary indexes were fully added in the first and second round while the indexes falling beyond the guidelines were deleted. From the final analysis results, five areas derived a total of forty-one indicators to create a degree of danger index from vigour status, growth and development status, diseases and insect pests, soil status, and management status. The degree of danger evaluation index can provide basic data for the protection of very old trees.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2017

The study is a precursor to the final goal of organizing a future school building plan to prepare for the new paradigm. Planning direction presentation through planning elements and principles is key purpose. Based on the results of the study, it is meaningful that the school facilities will be able to fulfil the educational role of the school facilities, including science, technology, and environment. Based on the theoretical concepts of prospective school facilities and research data, the school plans to construct architectural plan elements and construct the architectural plan based on the guidelines of the school plan based on the evaluation criteria of the school building and the evaluation criteria based on the evaluation criteria of the school building and the calculation of the plan through the procurement criteria of the school and the Future Schools.