In order to investigate the behavior of fatigue crack growth of SiC-particulate- reinforced Al-Si alloy composites, fatigue tests using single edge notched tension(SENT) specimens were performed. Composite materials were manufactured by using both permanent die casting and extrusion processes with different volume fractions of $10\%\;and\;20\%$. $SiC_p-reinfurced$ Al-Si composites showed the increased levels of threshold stress intensity factor range, ${\Delta}K_{th}$, for the increased volume fractions of SiC particles, which implies the increased fatigue crack growth resistance at the threshold or low ${\Delta}K$ levels, compared to the unreinforced Al-Si alloy. In the Paris region, however, the composites showed the increased rate of crack growth resulting in the unfavorable effects on the fatigue crack growth resistance. Critical stress intensity factor range at unstable crack growth leading to final fracture decreased as the volume fraction of SiC particle increased, because of the reduced fracture toughness of the composites. Extruded materials showed higher threshold and critical values than the cast materials.
Purpose: The oral teratoma is found approximately in live birth at the rate from 1 : 35,000 to 1 : 200,000. In a review of literature 16 cases of midline teratoma with cleft palate were reported. We report a case of congenital palatal teratoma with cleft palate in a 1-year-old girl. Methods: A 1-year-old girl was admitted our institution for the closure of cleft palate. On the intraoperative findings there was $4{\times}1{\times}0.5cm$ sized hairy soft mass at the midline and complete cleft palate. We did incisional biopsy intraoperatively and its pathology revealed heterotopic brain tissue. The excision of remaining mass and palatoplasty with Sommerlad's method were performed. The final pathology of the mass was mature cystic teratoma. Results: After the operation there were neither recurrence nor oronasal regurgitation. Conclusion: We report for one patient with congenital palatal teratoma associated with cleft palate and obtained an excellent result.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제26권1호
/
pp.85-92
/
2000
Common dental procedures(dental extraction & minor operation) are potentially stress-inducing in many patients, especially medically compromised patients. The body's response to dental stress involves the cardiovascular system(an increase in cardiovascular workload), the respiratory organ and the endocrine system(change in metabolism). To minimize the stress to the medical risk patient, the stress reduction protocol was established. The obtained contents were as follows: (1) Recognize the patient's degree of medical risk (2) Complete medical consultation before dental therapy (3) Schedule the patient's appointment in the morning (4) Monitor and record preoperative and postoperative vital signs (5) Use psychosedation during therapy (6) Use adequate pain control during therapy (7) Short length of appointment : do not exceed the patient's limits of tolerance (8) Follow up with postoperative pain/anxiety control (9) Telephone the higher medical risk patient later on the same day that treatment was given Though the stress reduction protocol above was applied to the dental extraction in medically compromised patients with the advanced infected teeth, the final responsibility for the complications(syncope, bleeding & infection, etc.) in a patient rests with the dentist who ultimately treats him. For the prevention of postextraction complications & poor prognosis, the authors treated the advanced infected teeth with the pulp extirpation, opening drainage through the canal and complete occlusal reduction. The final extraction and wound closure were then done after $1{\sim}2$ weeks. The final prognosis was comfortable without common complications.
본 논문에서는 이차 본딩으로 접착된 복합재료-복합재료 Single-Lap 조인트 시편에 대해 인장 시험 및 수치해석을 통해 그 파손 특성을 조사하였다. 시편시험에서는 시험 중에 CCD 카메라 및 AE 센서를 이용해 초기 균열의 발생 및 진전양상에 대한 시험적인 관찰을 수행하였다. 시편에 대해 기하비선형 유한요소해석 및 VCCT(Virtual Crack Closure Technique)기법을 이용해 시편의 거동 및 변형율에너지방출률을 계산하고 세 가지 관찰된 초기 균열 모드에 대해 파손강도를 계산하였다. 인장시험에서 초기 균열은 모서리 계면 균열, 측면 계면 균열 및 층간 분리 균열의 세 가지 형태로 최종 파손의 60∼90% 하중에서 발생하였다. 주된 파손 모드는 접착제 계면 파손(adhesive failure) 및 적층판의 첫 번째 및 두 번째의 층간 분리 파손이었다. 두꺼운 접착제 층을 갖는 시편들은 초기균열이 낮은 하중에서 발생하였지만 균열진전에 대한 저항성 및 파손하중은 높게 나타났다. 층간분리파손은 주로 두꺼운 접착제의 경우에 발생하였다. 세 가지 초기 균열 모드에 대해 변형률에너지방출률은 Mode I의 G값이 Mode II의 G값보다 크게 계산되었다. Mode I 및 전체 G값은 측면 계면 균열, 모서리 계면 균열, 층간분리 균열의 순서로 크게 계산되었다.
고준위방사성폐기물 심층처분시설의 안전목표치에 대한 부합성을 판단하기 위해서는 처분시스템의 시간적 변화에 따른 불확실성을 고려해야 한다. 이에 따라 심층처분시설의 폐쇄 이후 장기진화 특성에 대한 종합적 검토 및 분석을 통해 다중방벽 및 생태계에 미치는 영향을 규명해야 한다. 이에 본 논문에서는 우선적으로 핀란드의 심층처분시설에 대한 운영허가 신청과정에서 처분시스템 장기 성능평가의 일환으로 검토된 폐쇄 초기단계 진화 특성을 분석하였다. 또한, 이를 토대로 공학적방벽 성능평가를 위해 고려되어야 하는 장기진화 현상 및 발생요인을 종합하여 한국형 고준위방폐물 심층처분시스템 개발 시 중요도(안)를 도출하였다. 이러한 결과는 향후 한국형 고준위방폐물 심층처분시설 개발을 위한 성능 평가 및 안전성 평가 수행과정에서 기술적 근거자료로 활용할 수 있을 것으로 예상된다. 단, 각 특성에 대한 보다 세부적인 현상학적 검토 및 평가를 위해서는 최종 처분부지 특성 및 시설 고유 설계자료 등을 확보하여 그 영향을 사전에 검토해야 한다.
최근 컴퓨터 소프트웨어의 발전으로 환자의 모형을 scanning하여 3차원 가상 모델을 만드는 것이 가능하게 되었다. 이러한 모델은 컴퓨터로 처리되어 치료 시작부터 끝까지 여러 단계의 치아 이동이 이루어지고, 치아 이동의 각 단계별로 stereolithographic model이 만들어 지는데, 이는 일련의 투명하고 얇은 overlay 장치를 제작하는 기초가 된다. 계획된 치아 이동의 단계에 따라 치아를 움직이기 위해서는 환자가 장치를 항상 사용해야 하며, 중정도의 crowding과 공간 폐쇄는 이 장치로 치료가 용이하다는 것이 입증되었다. 지금까지 이 장치를 경험해 본 결과, 고정성 교정장치에 비해 환자가 불편을 덜 느끼고 심미성과 구강 청결이 좋아 환자의 협조도가 뛰어 났다. 이 장치는 완전히 맹출된 영구치열 환자에서 부정교합에 대한 또 하나의 유용한 접근법이라 할 수 있다.
Panda, Subhransu K;Mishra, Pradeep K;Panda, Subrata K
Structural Engineering and Mechanics
/
제74권6호
/
pp.723-735
/
2020
This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.
장기간 시행된 새만금 건설단계별 환경변화 분석을 위해 3차원 무작위 행보에 의한 입자추적 기법을 이용한 해석이 시도되었다. 방조제 공사로 만경 동진강 및 금강 하구역의 운동 양상이 크게 변화되었다. 변산반도 외해 부근 운동 감소와 호 내 북측구간의 흐름 정체가 특이하다. 조류 이동거리를 건설단계별로 평가한 결과도 유사한 결과를 보인다. 연직혼합형태의 변화 분석을 위해 수온, 염분을 고려한 밀도성층을 재현한 결과 방조제 착공 전 잘 혼합된 연직구조 형태는 공사 중 개방구간 존재 시 부분적으로 혼합된 구조로 변화되고, 완공 후에는 만경 동진강 하구 입구부에 염분쐐기 구역과 호소 측에는 강한 밀도성층이 발생한다. 해석결과 수평방향의 확산과 연직 방향의 혼합능력 감소로 새만금 내외측 수질환경에 부정적 영향으로 작용할 수 있음이 추론된다.
Dental extraction is potentially stress-inducing in many disabled patient. The body's response to dental stress involves the cardiovascular system(an increase in cardiovascular workload), the respiratory organ and the endocrine system(change in metabolism). To minimize the stress, the stress reduction method was established. The obtained contents were as follows: (1) Recognize the patient's degree of medical risk, (2) Complete medical consultation before dental therapy, (3) Schedule the patient's appointment in the morning, (4) Monitor and record preoperative and postoperative vital signs, (5) Use psychosedation during therapy, (6) Use adequate pain control during therapy, (7) Short length of appointment : do not exceed the patient's limits of tolerance, (8) Follow up with postoperative pain/anxiety control, (9) Telephone the risk patient later on the same day that treatment was given. Though the stress reduction method above was applied to the dental extraction in disabled patients with the advanced infected teeth, the complications(syncope, shock, bleeding & infection, etc.) may be occurred. For prevention of complications associated with the extraction, the authors treated the advanced infected teeth with endodontic drainage and incision & drainage before extraction. The final extraction and wound closure were then done after about 3 weeks.
In this study, fatigue properties and crack growth characteristics of a polycarbonate (PC) were examined during cyclic loading at various mean stress (${\sigma}_{amp}$) and stress amplitude (${\sigma}_{mean}$) conditions. Different S vs. N and da/dN vs. ${\Delta}K$ relations were obtained depending on the loading condition. The higher fatigue strength and the higher resistance of crack growth are seen for the PC samples cyclically loaded at the higher mean stress and lower stress amplitude due to the low crack driving force. Non-linear S - N relationship was detected in the examination of the fatigue properties with changing the mean stress. This is attributed to the different crack growth rate (longer fatigue life): the sample loaded at the high mean stress with lower stress amplitude. Even if the higher stress amplitude, the low fatigue properties are obtained for the sample loaded at the higher mean stress. This was due to the accumulated strain energy to the sample, where severe plastic deformation occurs instead of crack growth (plasticity-induced crack closure). Shear bands and discontinuous crack growth band (DGB) are observed clearly on the fracture surfaces of the sample cyclically loaded at the high stress amplitude, where the lower the ${\sigma}_{mean}$, the narrower the shear band and DGB. On the other hand, final fracture occurred instantly immediately after the short crack growth occurs in the PC sample loaded at the high mean with the low ${\sigma}_{amp}$, i.e., tear fracture, in which the shear bands and DGB are not seen clearly.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.