• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.46-58
• /
• 1991

An upper-bound method is applied to determine the final-stage extrsuion load and the deformed configuration of extruded billet. A simple kinematically admissible velocity field for trhee-dimensional deformation at final-stage is proposed. From the proposed velocity field the upper-bound extrusion load, the velocity distribution and the configuration of extruded billet are determined byminimizing the otoal power consumption. Experiments are carried out with full-annealed commercial aluminum billets at room temperature by using different sizes of elliptic punches. The theroretical predictions both in extrusion load and deformed configuration of extruded billet are ingood agreements with the experimentalresults.

• Transactions of Materials Processing
• /
• v.5 no.2
• /
• pp.97-104
• /
• 1996

It is very important to obtain the knowledge of loads and flow patterns in most processes because these information are the fundamental data of die design and process design. The objective of present study is to investigate loads and metal flow patterns for various process conditions in flat die extrusion of square-bars from circular billets. For analyzing the metal flow patterns of the billets photo etching is used on sections of split specimen. From this method metal flow patterns are analyzed for various area reductions friction factors and punch stroke through the process from initial-stage to final-stage. Experiments are carried out with hard solder billets at room temperature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1030-1039
• /
• 2006

A high power and high gain Doherty amplifier is designed by using embedded driver amplifiers in the final stage. The operational characteristics of a two-stage Doherty amplifier are analyzed, as a function of the two-stage peaking amplifier gate biases. The driver stages and final output stages are implemented using two single-ended MRF21045s and a single push-pull packaged MRF5P21180, respectively. This two-stage Doherty amplifier demonstrated 27 dB gain with a PAE of 23 % at 15 W average output power.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.177-181
• /
• 2003

This paper presents a 3-axis fine positioning stage. All the procedure concerning the design and fabrication of the stage are described. The stage considered here is composed of flexure hinges, piezoelectric actuators and their peripherals. A special flexure hinge is adopted to be able to actuate the single stage in three axes at the same time. A ball contact mechanism is introduced into the piezoelectric actuator to avoid the cross talk among the axes. The final design is obtained with the theoretical analysis on the stage. An actual fine stage is developed and the design specifications are verified through an experiment.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.44-56
• /
• 1997

When sewage sludge is treated by cornposting, higher moisture content and lower C/N ratio on sewage sludge is problems. This paper project to alesolve two problems. The almost trends in run 3 of MC 70% are similar to these in run 1 and 4 of MC 65%. A retention time of the highest temperature (>50$\circ$C) and increase rate of temperature in run 3 are an affinity to these in run 4. Particularly, decrease rate of temperature in run 3 is slower than others and this data shows the more activity of thermal microbial in run 3 than that in others. C/N ratio trends in run 3 shows slow reaction in initial stage but, after 9 days, is similar to that in run 1 and 4. Carbon trends in each run are a similarity to C/N ratio trends. Temperature, MC, carbon and C/N ratio trends in run 5, whose C/N ratio is 15, show less microbial activity than that in run 6, whose C/N ratio is 20. But temperature increase of the beginning stage and pH of the final stage in run 5 are greater than that in run 6. Final MC and carbon content in run 5 and 6 have a similar values. That is, final MC in run 5 and 6 is 49.39% and 48.97% and final carbon content in each run is 25.15% and 22.20%. Expecially, a temperature increase and C/N ratio decrease rate of the beginning stage in run 5 are greater than these in run 6. This shows the shorter lag time in run 5 than lag time in run 6.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.223-235
• /
• 2010

As the funeral service is on ritual of addressing death that is the final phase of life, it can be said to be the final stage of welfare service. It is developing into the stage of make-up, which reproduces the image of reality or expresses with the better appearance from the level of recovery technique, which restores the final form of the dead. This is caused by a request of the bereaved family with the aim of remembering the dead's final image with good looks. Methods, which are being changed by period, can be found in a record. As this funeral make-up is one field of special make-up, it is systematically made into proper application method along with the development in special materials. Thus, it will become one of the most important courses henceforth in our funeral culture available for beautifully decorating the dead's final image. In order to satisfy the request of the bereaved family, it is necessary to made floral decoration, casket cloth, and acoustic effect including the casket stage of worshipping the dead inside the funeral hall.

• Child Health Nursing Research
• /
• v.26 no.2
• /
• pp.222-237
• /
• 2020

Purpose: The purpose of this study was to analyze the concept of social support of nursing students using a hybrid model and to derive a definition and attributes of social support through theoretical, fieldwork, and final analysis stages. Methods: Twenty-nine studies were analyzed in the theoretical stage. Seventeen in-depth interviews were conducted with nursing students in the fieldwork stage. In the final analysis stage, the concept of social support was defined and the attributes were derived by integrating the theoretical and fieldwork stages. Results: The attributes of social support of nursing students identified in the final analysis consisted of two dimensions and eight attributes. The two dimensions were structural and functional support. The eight attributes were social network, educational, emotional, informational, economic, positive evaluation, self-esteem support, and support by providing a role model provision. The structural dimension included the social network support attribute. The functional dimension included the remaining seven attributes. Educational support and support by providing of a role model provision were newly derived attributes that reflected specific characteristics of nursing students. Conclusion: Based on the results of this study, we suggest that researchers should attempt to develop a scale to measure the social support of nursing students.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.1
• /
• pp.27-38
• /
• 2022

Purpose : This study is aimed to develop and validate the clinical practice education program and clinical competence scale of occupational therapy student. Methods : The development of the clinical practice education program used the delphi technique method, which had a total of five steps. Based on the occupational therapist's job analysis, the first stage assessed the importance of 21 experts, and the second stage examined the importance of 19 new specialists to derive constitutive factors. In the third stage, in-depth interviews were conducted with three experts based on the derived factors, and in the fourth stage, the final clinical practice education program was derived. In the final stage, the details of the clinical training program were drawn up based on the themes and were reviewed by two experts. Structured and unstructured interviews were conducted with 43 job experts. Results : The expert survey through the delphi technique was conducted three times, and content analysis and descriptive statistics were conducted to examine the distribution of responses. The final 11 educational program topics and contents were derived. Topics are confirmation of client information, evaluation and intervention, cognitive therapy, spinal cord injury, brain injury, musculoskeletal disorders, pediatric occupational therapy, interventions in activities of daily living, driving rehabilitation, vocational rehabilitation, occupational therapy assessment tool, safety training and management. Conclusion : The clinical practice education program reduce the difference between school education and clinical education of occupational therapy student. Occupational therapy helps college student understand occupational therapy practices and improve the quality of clinical education. Through more research and supplementation of clinical practice education programs in the future, it is suggested that clinical practice education be successfully operated in various practice institutions and used as basic data for designing and evaluating useful educational models.

• Communications for Statistical Applications and Methods
• /
• v.5 no.2
• /
• pp.539-557
• /
• 1998

This article is concerned with the problem of estimating the mean of a one-parameter exponential family through sequential sampling in three stages under quadratic error loss. This more general framework differs from those considered by Hall (1981) and others. The differences are : (i) the estimator and the final stage sample size are dependent; and (ii) second order approximation of a continuously differentiable function of the final stage sample size permits evaluation of the asymptotic regret through higher order moments. In particular, the asymptotic regret can be expressed as a function of both the skewness $\rho$ and the kurtosis $\beta$ of the underlying distribution. The conditions on $\rho$ and $\beta$ for which negative regret is expected are discussed. Further results concerning the stopping variable N are also presented. We also supplement our theoretical findings wish simulation results to provide a feel for the triple sampling procedure presented in this study.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.178-188
• /
• 1994

A design methodology is applied for manufacturing a disk-brake piston component. The design criteria are the limit drawing ratio and the forging load within the available press limit. Also, the final product should not have any geometrical defect. The rigid-plastic FEM has been applied to simulate the conventional four stage manufacturing processes, which include deep drawing and forging process. Simulation of one stage process from a selected stock to the final product shape is performed for generating information on additional requirements for metal flow. Two stage forming processes with different punch corner and nose geometries are also simulated to identify the possible best solutions. Finally, the best manufacturing process is selected, which is using a hemispherical punch int he deep drawing process.